Friar

Hi, I have never had to deal with this ecm me of the maps that don't know, and I don't trust what it says ecm, and for the press turbo to me from very small values compared to the volori absolute of, for example, edc16, do you have any suggestions?
Grande punto 1,3 90 Hp Mjtd P455

Backgroop

Hello email the file ori.. however the 1.3 mjet marelli 6jf 6ef 8df 8ef are very different in the maps from the classic edc16 Bosch.. to map these ECU's you need to know where to put your hands and how to do it otherwise you'll find? the with a machine that smokes and goes less of the original..

voglioimparare

Friar

Place the file

Use the Titanium 1.61

ciroecla

these ecu's are not in the ecm , mistakes a lot, and many of the maps do not exist in the ecm.
these maps, I only in winols and there is nothing better ( in my opinion ) to change the latter.
learned to use winols and believe me , you'll really, really well.

mafani

these ecu's are not in the ecm , mistakes a lot, and many of the maps do not exist in the ecm.
these maps, I only in winols and there is nothing better ( in my opinion ) to change the latter.
learned to use winols and believe me , you'll really, really well.

hello ciroecla you are right about the precision of winols but you have to always have the damos to know actually how it works every single corner,otherwise ? how to use the ecm according to me....

infinityecu

Hi, I have never had to deal with this ecm me of the maps that don't know, and I don't trust what it says ecm, and for the press turbo to me from very small values compared to the volori absolute of, for example, edc16, do you have any suggestions?
Grande punto 1,3 90 Hp Mjtd P455

Hello please I think that pi? what else is a matter of habit if you know a software and then you know what touch can do everything without problems :-)

Electric

I agree with ciroecla winols and one of the best just learn what you're touching, experience with ecm tells you one thing but in the meantime, tap another thing

ugoboss

I agree with ciroecla winols and one of the best just learn what you're touching, experience with ecm tells you one thing but in the meantime, tap another thing

I don't understand what you mean "with the ecm tells you one thing but in the meantime, tap another thing " if you edit a curve, the ecm will change the one that is not another thing, if you mean that the definitions are wrong then what is.

enzopezzano

Sure you have the damos with winols and much more? simple to understand what touches, but if you're pretico looking at the curves and the values on the axes you understand what you're doing. I have always mapped to the ECM and I'm happy, even with the marelli. All you need are the maps that are open to you the driver and you just already for a good map.

sportknight

14-11-2013, 11:45

there are already? 2 or 3 discussions in which you explain the curves of the marelli and the conversion factors,just do a search ;)

obd75

the marelli are a p? out of the ordinary,with the ecm ? true that in some cases there are maps out driver,if you are not s? how to interpret the curves of the injection you will have more? smoke performance, please follow the advice of sportknight, the discussions, if followed with attention, you will clear the strateggie to use with this ecu.
driver ecm view tabbelle tells you names full and spins in 2d do not match....

tecnoecu

hello I read ke to map the uses the titanium 1.61 then I assume a version of the clone? I have the original one and I can assure you ke in the last 2 months, the drivers for marelli 1300 have been updated, unfortunately no I have the x permission to see your file, I have the board pay attention to the axes load rpm, maybe to help you can ask the administrators.about winols ? true ke ? the best program but if you dont have damos you first impararti Arabic.hello

sportknight

well guys,the ecm can help you find the maps, but you must learn to read the breckpoint....