View The Full Version : problems or unusual....
the problem ? that in the moment of opening the file with the usual sw of change, I find myself with 27 maps the pedal..I say 27..also when I get in the table and as if they were reversed...what? with the values upside down...
now, I do not s? whether it is a prerogative of the vw with dsg, but I would like to understand a little more...
and is this possible???
thanks
ah.. I wanted to add only one thing ...the car mentioned above ? been read with mpps v12, which I had never tried before, because the one that I use regularly in fact a bad end..***** s, and the fact that we set for 5 minutes just to read it..and normal??speed of reading the media...
the 5 minutes to read I know that are in the standard, the 27 maps the pedal in the effects are a bit many, but it was a car with dsg there may be, as the table is not in use, I prefer the 2d, you tried to look at them in 2d to see how you are.
you ugoboss I look in the table are normally as in all the edc16u...
but when you scroll over them with your cursor to see everything backwards...
of the type to 500 rpm with 10% load see 430nm....and "going" of rpm and load and see the values decrease...
however the map ? in the first link posted....
msport (exil77grande)
17-09-2013, 23:12
you ugoboss I look in the table are normally as in all the edc16u...
but when you scroll over them with your cursor to see everything backwards...
of the type to 500 rpm with 10% load see 430nm....and "going" of rpm and load and see the values decrease...
however the map ? in the first link posted....
I have mapped a couple who had 27 maps of enrichment and that's normal.
hello msport..I wanted to ask you, how do you work with the change?...the map also its the ecu?...if you like??
the s? I always have a lot of questions at a time but...I have a thirst for knowledge....ahahahaah...
cinqueturbo
17-09-2013, 23:47
hello msport..I wanted to ask you, how do you work with the change?...the map also its the ecu?...if you like??
the s? I always have a lot of questions at a time but...I have a thirst for knowledge....ahahahaah...
Sorry munro, but the file from t? posted and 63KB..
and compressed, you have to extract...
cinqueturbo
17-09-2013, 23:57
and compressed, you have to extract...
check..
you are right and 63kb even after unzipped...
the one read by me(the original of that ? compressed state to be posted) and 2mega...
where is the error??
cinqueturbo
18-09-2013, 00:10
you are right and 63kb even after unzipped...
the one read by me(the original of that ? compressed state to be posted) and 2mega...
where is the error??
? Nothing.....
I fixed that..download the second one posted is not the first...
until kindly admin or the mod's little helpers to my error...
I apologize to all of you..
cinqueturbo
18-09-2013, 00:27
I fixed that..download the second one posted is not the first...
until kindly admin or the mod's little helpers to my error...
I apologize to all of you..
munro, but tonight you're not careful.. the file that you posted is not gold..
I downloaded so by the car....
with no gold what do you mean by that and remapped??
cinqueturbo
18-09-2013, 00:59
I downloaded so by the car....
with no gold what do you mean by that and remapped??
with no ori is not to say that it is re-mapped,
but that even the slightest variation from the original Software does not recognize the driver for the selected file...
then pu? you have the EGR Off, re-warm and soft and ori....
then it should not be in the file section Ori's all here...
sportknight
18-09-2013, 08:37
I don't remember the maps of the 140cv and now, I can't check but I was thinking,if c'? the map of conversion of the pair you could simply change her, so you don't change all of the 27 maps...
on this car I need to delete the dpf-egr and lim speed?....
and also make us a map light, but the car has a problem with a couple of injectors....
a safe...then you will have to? put in place before the defect...
then, surely, the mapper? with the method nm>iq to avoid going crazy moddare all those maps pedal..
also because I would not have trouble with the dsg...
guys I wanted to ask you one thing...
for this car I don't have the exact driver for hw and sw...
for? however, I see all the maps with a different driver...
what I would like to know ?:if I edit the file with a different driver I can have some kind of problem??
type with the check-sum or other??
downloaded the file that I linked to above it is equal to your only one who has the cks good and it is recognized, look at the drive and then open it manually with your with what they have read.
the bed with a mpps v12 just took that for? I don't trust so much....
not s? why? but he has read, there really puts very little....
today I read an edc15 a golf4 in a minute poor...and normal??
ugoboss that the problem has the cks file posted by me??
if I try to write it that happens??you plant the ecu??
your cks goes well, and that the tita does not recognizes it, you can also write because the interface should correggertelo, then the ECU that the plant can always happen.
the problem ? if you plant for me are a pain...
why? not having a bdm serious I can not resume it..
and in the area for accommodation at the counter in the bdm ask me 400 euros...
Same my problem? I can confirm that MPPS v12 of the forum corrects the CKS!
my mpps not ? of the forum...unfortunately..
c'? a way to understand if ? secure in writing??
I have to force to be advised to all the saints of paradise...
and try the effect of f???
And the' box version? The only thing that comes to mind ? wait for it to open, let him two photos and see if ? the same as mine! A friend of mine n? bought one on eBay and it does not work as good as the one I have, even hangs in the reading! The open and ? different, change some components, such as, for example, what appears to be a microprocessor!
and the version with everything in the cable completely black....
and reading about this car and planted also read a couple of times....
porc....of that.........:mad:
msport (exil77grande)
18-09-2013, 23:49
the problem ? if you plant for me are a pain...
why? not having a bdm serious I can not resume it..
and in the area for accommodation at the counter in the bdm ask me 400 euros...
if I ever have similar problems please send a ***** that we can help with that.
msport (exil77grande)
18-09-2013, 23:52
I fixed that..download the second one posted is not the first...
until kindly admin or the mod's little helpers to my error...
I apologize to all of you..
I placed the file you posted and deleted the warning.
msport (exil77grande)
18-09-2013, 23:53
hello msport..I wanted to ask you, how do you work with the change?...the map also its the ecu?...if you like??
the s? I always have a lot of questions at a time but...I have a thirst for knowledge....ahahahaah...
not to complicate your life with the exchange ask a mapping,and now I can't remember if it is the 1.9 but if you are talking about the 2.0 and has the dpf and' 8v' c......... then perdici even less time because of the miracles you do.
ok..thanks msport..then we feel through **** why? I want to ask you a p? valjean's...
and the version with everything in the cable completely black....
and reading about this car and planted also read a couple of times....
porc....of that.........:mad:
if you are it is planted in reading a couple of times, I don't recommend you do the writing ,at least until you have not made a back-up of the control unit.
faberecu
23-09-2013, 17:09
quote in full , at times when it corrupts the flash the micro goes to write to the eeprom!!! then I am sorrows , a focus years ago has finished writing 100% a nice error at the end.... car game , but there is damage to the riscadatore Lambda probe!!!
throw-ori ... same problem ... moral reprogramming in the Ford and then bdm everything is ok
sometimes due to laziness combine cablemi bdm provided to connect everything carefully!!!!
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.