file clock marellki iaw 8f.5t point

[rego88]

hello guys, I try to kindly a file of clock for marelli 8f.5t for point in the first series 1.2 75hp.... I was convinced that I ritrovarmelo, instead I lost.... thanks to those who I e-mail a working ;)

[giuseppe1374]

hello this should do in case your

[jolidj]

here's the thing. write to the file , remove silt box ,start the machine and put the files in.

[rego88]

I provatocon this file :( no, but it works.... out the ecu code, turn the key, and the machine turns on the spiadell the injector normally, and does nothing to strange moves.... instead, when I do 16f, makes a strange noise as if it opens the injectors....

[rego88]

here's the thing. write to the file , remove silt box ,start the machine and put the files in.

that means start the car???' I have to put it into motion with this file and then I put back the original one??

[rego88]

planet.... I opened the file but ? the same that has postasto joseph.... mistake I the procedure???

[giuseppe1374]

the procedure ?: unplug the cable box immobox, put this file, turn the ignition and leave for 30 seconds, close the picture, put his gold and put them on the bike,
you used one of the other memory?

[rego88]

this procedure, I've already done with this file yesterday... but as soon as I put in motion, the injector and the fuel pump part is slightly delayed from the usual.... after the normal time off, (the usual 7/8 seconds of those cars) and then does nothing.... like for example, if I turn on a framework to normal... I waited for a 40ina of seconds, after that I put the eprom in the original but nothing.... not to be in the bike.... when I do, instead, 16f, the light dell injector turn on and off.... in contemporary feel injectors that open on to the engine.....

[jolidj]

the procedure is the same , I + do na botta start-up . I leave + 30sec on the framework and relaying the ori. 100%

[rego88]

ok, but you when you place ste 8f, you happen to hear the injectors that open??? I did one once.... and I remember that the injectors are opened as in the 16f.... and the light is logically turned on and off

[giuseppe1374]

are you sure the ecu ? working? have you unplugged the cable from the immo box? does not the antenna cable but the cable is the one that has more? wires

[rego88]

this ? a makkina de a guy who has lost all keys.... the ecu and immobox I disconnected completely.....

[giuseppe1374]

if the clock does not work for you you have to aggire on the micro motorola

[glittering chiffon party dress.fitted]

There are network interfaces that do their job well and do not cost much hello

[jolidj]

file clock me, has always worked. cn the file ori switch on the light injection????

[alex68]

if you still have trouble mandamela you the way I do it with the appropriate interface hello

[giuseppe1374]

ditto if you have problems mandamela, I do it willingly

[polini]

hello this should do in case your

hello I also I have one from scodificare and read with which the tool reads and writes to this ecu