View The Full Version : Delete key code key Alfa 156 1.8 TS
I would like to be able to delete the key code from my car ( Alfa 156 1.8 TS 144 HP 1999 ).
I have a single key and a duplicate to the Alfa Romeo I have asked for 255 Euro.
Not ? possible duplicate why? the chip does not ? decrypted state, probably why? ? an old model or perhaps even why? there were many requests for thieves drive of duplicate keys.
I asked in areas where the clone is close to Naples and have not been able to duplicate them for the key.
I am waiting for the Gallo2, and a diagnostic interface..? I think this is the first step for a beginner; but I am ready to study and informarmi...su all of us? in regards to the coding and/or scodifiche of the Ecu.
If some pious soul...wants to direct me on what to do ? I'd be grateful.
;)
If I have understood you need a dual-key?? You could work around the entire opening for the key, take the transponder and tie it cn insulation tape to the antenna code, so you can make a copy without spending too much money and have an extra key...
If I have understood you need a dual-key?? You could work around the entire opening for the key, take the transponder and tie it cn insulation tape to the antenna code, so you can make a copy without spending too much money and have an extra key...
You possibly could do so well?, if you do not wish to start to enter in the field of encoding and/or scodifiche control units car enthusiast.
I could also insert the transponderino in the ignition key and solve every problem..I am also a duplicate which of course only opens the door but does not put in motion.
Among other things, I have already ordered and paid for the hardware, I just have to wait for it.
or even a nice scodifica total
Look if you are not able to duplicate it in Naples.... if not at the cost of slightly lower than those of Alpha-and without the remote control on the key..I don't think there are places in the world that me the duplicate of 40 or 50 Euro.
Look if you are not able to duplicate it in Naples.... if not at the cost of slightly lower than those of Alpha-and without the remote control on the key..I don't think there are places in the world that me the duplicate of 40 or 50 Euro.
Hello...40-50 euro you don't make it..I when I duplicate the key to my stylus without even the code card I spent about 100?
You have to see if ?. Code 2 I had my own problems with a 156 the solution to put the transponder In the antenna,and the ir? fast and economical, even if I think that the zed is able to clone it
100 Euro maybe duplicate but of course without the remote control for opening doors ( and I agree )... regard to? the original Alfa without remote control costs 150 and you have the key to the red Alfa Romeo ? a whole other thing compared to the duplicates standard black 100 Euro.
If you want with the remote control for opening doors, included you can only request one Alpha and costs 255 Euros. And ? this
I have only one and ? even split, I would keep with the tape in order not to lose the transponder that ? inside.
While I have two duplicate type these
the key of which I only open the doors with the remote control ) but obviously not set in motion.
Take the trasponderino and insert it in the antenna or in the ignition key or to another party ? is the solution more? economic ( that interests me to a certain point, why? the gallo2 gi? I bought it ) but for me ? a defeat... why? if I don't duplicarti if not, the figures disproportionate to the value of the car...go to the child, at least you scodifico.
You have to see if ?. Code 2 I had my own problems with a 156 the solution to put the transponder In the antenna,and the ir? fast and economical, even if I think that the zed is able to clone it
I don't know that code ?..I only know that from anyone I've brought it in a specific hardware to read it in the computer, they told me that it has a chip ( I think texas instrument ) non-clonable.
Only from the duplicator number one ( where it also goes on Arsenio Lupin ) they told me let's see what putimm ago ( I translate: we can do ) but I can tell you first if we can do that will be? without the remote control and it will cost you? at least 90 Euro if not more? ).
Cos'? I'm zed???
zed-bull hardware to clone keys.
giuseppe1374
05-09-2013, 14:46
well you were given the wrong information, you can either get a new transponder but not from the key and then you can buy a key you used and codificarti the remote control, but not with the equipment you mentioned.
However, I think we're going OT respect to the subject matter of the Topic or Thread that is to say it wants ...so is allowed and not allowed that the key is duplicated or not at this point riformulo the question: anyone ? willing to help me to delete the immobilizer from my Alfa 156 1999???
However, I think we're going OT respect to the subject matter of the Topic or Thread that is to say it wants ...so is allowed and not allowed that the key is duplicated or not at this point riformulo the question: anyone ? willing to help me to delete the immobilizer from my Alfa 156 1999???
contact motorsport, or carlo abarth surely you can help are in your area
contact motorsport, or carlo abarth surely you can help are in your area
Unfortunately, at the moment are not in Naples, working out are in the romagna. Until last week, I was already. But if you contact them the same give me some advice?
Unfortunately, at the moment are not in Naples, working out are in the romagna. Until last week, I was already. But if you contact them the same give me some advice?
you want to speak with are serious and prepared, and especially equipped otherwise there is a discussion where we scodificata if woi try alone,
ps
you want to speak with are serious and prepared, and especially equipped otherwise there is a discussion where we scodificata if woi try alone,
They are here to learn, and honestly I would like to try alone, or with the help of someone expert..why? I would not stay at the foot with the car, for the moment, I know that you scodifica on the bench.
Are waiting for Autocom cdp pro for the diagnosis and Galletto V2, I have VagCom diagnosis for the audi group ww and seat.
Dov'? discussion?? I could not find it.
ps
why? not ? true?? hahahahaha....
Wow..but I posted it myself..and also you, to me they are just inzallanuto ( too distracted ) not to be noticed.
I wonder the files are the same for a 156?? the ecu ? the same, so are the files???
however, I can't download nothing schemas file nor anything else for which you will have to? wait. I wanted to at least start to get the patterns for goats how to make the connections to the tour...why? with regard to the programming of the eeprom have a little experience in the past with various ICprog..master Card etc etc..I have had.
I had to continue to write ...and I answered instinctively...now I can't edit the message..
so I can here..
I said I have experience of programming, but of connections, disconnections , wire, pin, 12-volt, bulk, etc, etc I don't even know where to start; as I don't know where to start to disassemble the unit and remove it from the car.
I should also see some video.
in order to disassemble it from the car, it is not difficult, if it is a m1.5.5 and' above the throttle body of the intake manifold, disconnect the connectors above and then fixed with 4 small screws to the frame below.
in order to disassemble it from the car, it is not difficult, if it is a m1.5.5 and' above the throttle body of the intake manifold, disconnect the connectors above and then fixed with 4 small screws to the frame below.
Do you know if scodificarla I have to make welds or I can send the file directly connecting the Cock to the ecu?? the file scodifica know where I can find it??
Thanks
I'm sorry but I do not have this file, I know that you don't have to solder anything to be placed only in the boot.
I'm sorry but I do not have this file, I know that you don't have to solder anything to be placed only in the boot.
We hope that some pious soul to help me..for now I can't even start the software of the Cock, I asked for info in the other topic, hoping that someone will give me na hand.
Hello and thanks
We hope that some pious soul to help me..for now I can't even start the software of the Cock, I asked for info in the other topic, hoping that someone will give me na hand.
Hello and thanks
I'm sorry, but why don't you contact your seller?
I'm sorry, but why don't you contact your seller?
For what? to ask you to help me scodificare my Alpha?? but they are not preparatory are only sellers.
For the Rooster V2 I contacted them tomorrow, I will give you directions to see if ? broken or if I am the one who are not able to make it work. If ? failure me the return working safely.
of course I was referring to the rooster.
of course I was referring to the rooster.
Them to tell the truth they are available... I have also linked a video, after I try to run the letters in a fix specific.
However, in the morning you will connect with teamviewer and technicians will prove? directly.
My dear and this ? only the beginning...hahahah I figured when it should? connect it to the car, with the misfortune that I find myself going I can walk.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.