HELP!!!! scodifica total alfa 145 1400 twind spark ecu bosch m1.5.5 [Archive]

street racers

02-09-2013, 16:13

hi guys, I ask for a scodifica that I am doing on a alfa 145 1400 twin spark I tried to scodificare the ecu putting a boot on the bench following the pattern of galletto2 the written and all but nothing the car is not part of the attached file that I wrote "no code" CAN SOMEONE HELP me???? thanks p.s. no I can more of you to enter, not even in the diagnosis!!!

street racers

02-09-2013, 18:41

none??? I have the imminent need guys!!! thanks!!!

giuseppe1374

02-09-2013, 18:45

which interface do you use? are you sure that you correctly put it in the boot?

street racers

02-09-2013, 18:48

hello, I use galletto 2 is I think I have put in the boot for good because he has written up to 100%......... but the car cmq nn part

giuseppe1374

02-09-2013, 18:59

who wrote it does not mean that ? was put in the boot can you make me a screen?

street racers

02-09-2013, 19:04

if you want to attach the data to the ecu that you want to screen??

street racers

02-09-2013, 19:13

then sorry I forgot...... using the schema of the cock 2 doesn't even have the data instead of using the schema ecuvonix you in the sense I connected the positive and k line and the boot as it says in the cock the more I connected the wires to the masses, which says ecuvonix the only way I can do data and write all and 2, the mode that the sun nn work...... place them in the annex IN SUMMARY, I CONNECT ALL THE WIRES OF BOTH THE SCHEMES, the ONLY way to GO.........

giuseppe1374

02-09-2013, 19:26

then the first base you have to use, or one scheme or the other not both the risk of frying the ecu always that already? I would not have done that, the second thing from id that you have put on the ecu is not ? in the boot,
when the ? must not mark the km etc etc. the ecu is not l you put it in the boot in the correct way

street racers

02-09-2013, 21:50

But why then, according to the schema of the cock nn??? and if I do only what ecuvonix even?? Can you tell me a procedure working???

blackwolf76

02-09-2013, 22:06

I galletto v48, I've rewritten a 1.5.5 of an opel bench, using the schema provided with the gallo V2 for fiat as your own, without a will in the boot, but by writing normal after that mpps me he had locked in the phase of reprogramming.

Make sure to check the links and you'll see that if you have not broken anything, you should be able to without problems.

giuseppe1374

02-09-2013, 22:15

if you use the schema of the rooster remember that you have to have the mass in common between gallo power supply and the ecu you have done so? unfortunately, without information, there is little

street racers

03-09-2013, 00:28

I checked and rechecked but nothing.......if you dont connect it to the masses and support the thread of the boot on the pin under the cover nothing nn ago, data writing..........I don't know boooooo

street racers

03-09-2013, 00:31

sorry, I put the schema of the rooster!! ec who by connecting only the sti wires and was able to put it in the boot and write??? thanks!!!

blackwolf76

03-09-2013, 00:37

? the pattern that I used, only that I reprogrammed without opening it and without putting it in the boot. Try to write as if I wanted to get her in the serial.

street racers

03-09-2013, 00:44

if you use the schema of the rooster remember that you have to have the mass in common between gallo power supply and the ecu you have done so? unfortunately, without information, there is little

I have connected one of the black wires of the mass that comes out from the cock to the casing of the ecu and put it in the boot I used was white.......I wrong???

aldinik

03-09-2013, 00:46

? the pattern that I used, only that I reprogrammed without opening it and without putting it in the boot. Try to write as if I wanted to get her in the serial.

It seems strange to me from what I have said the m 1.5.5 they only make them in boot mode and on the bench.

street racers

03-09-2013, 00:52

giuseppe1374

03-09-2013, 11:19

you do not solve ever since? even when one gives you the advice you make your own! explain to me then what the center of the wire boot to the edc17? who said to use that wire??
you put the mass in common between the rooster and the ecu as I told you? if you are on your own as you want to solve??

street racers

03-09-2013, 12:22

Not that I have done my own head, that the test with the wire of the boot is made before you tell me how to connect.......anyway, AS I UNDERSTAND I have to connect the mass of the rooster box ecu and from the box to the pin under the cover right??? I thank you dell for help but I pissed if sometimes no I understand.....I am a novice!!!

giuseppe1374

03-09-2013, 12:38

here you do not upset anyone, but it seems to me that I have tried more? times as you have to do, and after two days you are still at the starting point, you need to have the mass in common
okay as you wrote above, when you put it in the boot, you notice it because you must not display in the "ID" (in km) and date programming, roughly like this:
Bosch HW: 0261204943
Bosch SW: 1037352268
Fiat HW: 1037352268
The ECU is not encoded
Max KM: 0.00 km
Date progr.: 00-00-0000
Max Revs:0
Programming: 0
Crc Errors: 0

street racers

03-09-2013, 12:45

Ok all clear afternoon I feel for now thanks!!!

then I rovato so by putting the positive, as it says in gallo2 then I took one of the wires of the mass of the cock attached to the box ecu and from the box I went to the pin of the boot, but it says

ERROR SAND WAKE and nn is nenahc and the data........

however, when I was able to write 100% that the machine nn started, these were the ecu data read-after-write

cristianbomberos

03-09-2013, 21:28

This type of unit I, personally, do to the counter, and is also made with the kwp2000 without problems with the cock, I have never tried to

aldinik

03-09-2013, 21:53

This type of unit I, personally, do to the counter, and is also made with the kwp2000 without problems with the cock, I have never tried to
Informing me around to remove the immobilizer from my Alfa 156 1.8 TS ( which has the same ecu ) I was told that it is to tour, to me, are not very clear, the contacts of the various pins. However, to get a bit ordered the coq prover and?.

cristianbomberos

03-09-2013, 23:13

If you want tomorrow I'll send you the pin out of the ecu x food tour

aldinik

04-09-2013, 00:44

If you want tomorrow I'll send you the pin out of the ecu x food tour

Thanks...but if possible, a very elementary...are in the very early weapons, and I usually don't have things clear.

street racers

04-09-2013, 01:37

the pinout I have them too........I have tried all the schemes but nothing the car nn ec party little to do.......I don't know anymore what to do!!!!

sorry someone could send me a file and tested that it works??? thanks!!!

giuseppe1374

04-09-2013, 11:44

here are the files tested, first load the cod file after off, hangs up, and load the other file

legendaryslave

04-09-2013, 13:29

aldinik

04-09-2013, 14:20

my advice ? do not use the cable tricore but the obd food is the cock (obd) that the ecu from the external power supply 13v to use the mass of the power supply
you place my skema links
ps we felt yesterday on the phone?

I don't know if you're referring to me or not.*****s unfortunately I'm not enabled to view it to download the file that you attached.
I have to wait for the 50 messages, when they do? scaricher? :(

legendaryslave

04-09-2013, 15:13

I don't know if you're referring to me or not.*****s unfortunately I'm not enabled to view it to download the file that you attached.
I have to wait for the 50 messages, when they do? scaricher? :(

no ? reported to street racers that is trying to make the scodifica and I know that we felt yesterday on the phone:cool:

street racers

04-09-2013, 18:33

no ? reported to street racers that is trying to make the scodifica and I know that we felt yesterday on the phone:cool:
you hello we talk on the phone anyway thanks to all I solved it with the file of joseph GRAZIEE!!!

legendaryslave

04-09-2013, 19:06

The problem was in the file then?

street racers

04-09-2013, 21:25

It was in the files....damn carsoftware and ecuvonix!!? thanks again

giuseppe1374

04-09-2013, 22:20

? always a pleasure to help who ? in difficulty

street racers

05-09-2013, 09:17

thanks again!!! a good make!!

carbo92

07-10-2013, 21:23

aldinik

08-10-2013, 09:55

Guys on an Alfa 156 1.8 Me1.5.5 with HW 947 how to behave? I have already? uploaded the file and tested this on the forum, but the car will not start. I have to say that fits perfectly in the boot as I do not get the MILES.
Thanks

You've uploaded a file?? also I have one ( and not ? the one on the forum ) that I have not tried it yet..why? I expect to replace the Rooster, I remember that one user told me that the files were two.

p.s. Alfa 156 1.8 TS of the 1999 m1.5.5

carbo92

08-10-2013, 10:55

You've uploaded a file?? also I have one ( and not ? the one on the forum ) that I have not tried it yet..why? I expect to replace the Rooster, I remember that one user told me that the files were two.

p.s. Alfa 156 1.8 TS of the 1999 m1.5.5
Why? are the two files?