Failure of airbag Fiat stilo

[Racer Boy]

Hi guys, on my stilo 1.6 16v, year 2001, I have an annoying problem regarding the failure of the airbag. Documenting the net I've discovered, and after some testing found that it is the sensor called OCS if I'm not mistaken place under the lining of the passenger seat. The options that I know of to fix this problem are two, or replace the sensor (expensive solution) or in the market there are emulators that put in the place of the sensor send a signal to the controller, "see" the weight of the passenger by eliminating the failure. My question is: ? can from the control unit to exclude that the sensor and reset the airbag system?

[legendaryslave]

you can make or upload a dump of an ecu without the sensor, passenger air bag, or work on your file, it's up to you

[Racer Boy]

I have to say that I'm really a novice about but they are here to learn. What I need to be able to do this?

[legendaryslave]

you have to read the e2p in the ecu, the air bag that should be a 95080 brand st if I remember correctly, this operation can be performed with station hot air welder pond and a programmer type willem gq4x upa xprog and so forth, but help

[Racer Boy]

Thank you you were very clear. Not having a programmer ? can intervene via obd?

[legendaryslave]

Thank you you were very clear. Not having a programmer ? can intervene via obd?

no, no, absolutely, at least that I know you can not' do

[blackwolf76]

or put a resistance of 2.2 ohms on the wire of the sensor and should see you at the seat always occupied the unit, the only problem you will open? the passenger airbag in the event of an accident even if there is no one sat on it.

[glittering chiffon party dress.fitted]

Sure you can insert a resistance of 2.2 ohms on the sensor of the presence hello.

[blackwolf76]

Sure you can insert a resistance of 2.2 ohms on the sensor of the presence hello.

Should be good for the 99%, otherwise if you want to go sure, you can measure the resistance on a seat working with a tester, maybe one of the other side, and we see that being accurate.

[glittering chiffon party dress.fitted]

From tests carried out in the presence sensor passenger side can not be excluded with the resistance, from airbag control unit with a program dedicated to the exclusion ? possible, as well as the installation of an emulator available in the network from me already? tested with favorable outcome.

[egs]

With the resistance does not go to delete the sensor weight, but to emulate the presence of the passenger, as would the emulator. The deletion is done from the control unit, where possible, why? not always by editing the file of the ecu, the airbag, is dropped. Via serial I don't know, maybe with the carprog...but ? to see.

[egs]

No, with carprog does not go via the serial....

[nasone147]

From tests carried out in the presence sensor passenger side can not be excluded with the resistance, from airbag control unit with a program dedicated to the exclusion ? possible, as well as the installation of an emulator available in the network from me already? tested with favorable outcome.

[glittering chiffon party dress.fitted]

I don't know if I can post the link where you can purchase emulators of various kinds, ? a seller, very well known you just need to write emulators on ****** and surely you arrive at your destination, you will find a great assortment of emulators and other hello, good job.

[angelolsp]

I too have a problem with this on a 1.9 jtd while eliminating the errors reappears...

[glittering chiffon party dress.fitted]

Always speak of the presence sensor passenger side? if not, in many cases, if the problem ? regarding, side airbags,front seatbelt pretensioners etc ,if you want to permanently delete all the errors you have to clean the connectors with spray dedicated hello.

[angelolsp]

you and the senssore presence...nonn I knew there were emulators now I inform you otherwise

[sno74]

there are emulators dedicated to the stylus c'? a universal version that then septa according to your need and makes you different things......

[nasone147]

I don't know if I can post the link where you can purchase emulators of various kinds, ? a seller, very well known you just need to write emulators on ****** and surely you arrive at your destination, you will find a great assortment of emulators and other hello, good job.
thanks!!:)
good job to you too! ;)

[angelolsp]

and how you should set excuse the silly question but I never had anything to do with emulators...

[egs]

I don't know....there are tools that can do the crash in serial, such as the one I quoted, but to the sensor weight I don't know... however, the emulator must be installed below the connection of the seat...

[sisco]

I also had the ache to do with a problem on air bag bmw 5.23 inherent to the sensor employment passenger seat and I solved it with resistance bought online, complete of connector to insert in place of the wiring that goes to the seat cushion, even the type sold in both the resistance that was either the seat which is occupied, that the one who did it either ******looking I also found the emulator to, as you put jumper f? either the seat is occupied or not, while I was looking for I seem to have seen also for fiat, look on ebay, I enclose a pdf of the emulator for bmw, but I think that will be? so much for fiat

[nasone147]

I strongly recommend the solution mentioned already? some of the links above,the emulator that is on the network,unfortunately I can not go into specific,so I had to test it and it works perfectly.
good job to all!

[cristianbomberos]

Exactly as it says in glittering chiffon party dress.fitted the emulator ? the instrument pi? spot on for this type of problem

[giary74]

Always speak of the presence sensor passenger side? if not, in many cases, if the problem ? regarding, side airbags,front seatbelt pretensioners etc ,if you want to permanently delete all the errors you have to clean the connectors with spray dedicated hello.

curiosities?: but ? recommended to disconnect the battery before working on the connectors, or can you? do everything with just the ignition turned off?
I would not want to do a crash test from a standing!!!!

[legendaryslave]

curiosities?: but ? recommended to disconnect the battery before working on the connectors, or can you? do everything with just the ignition turned off?
I would not want to do a crash test from a standing!!!!
you feel me pull the battery any operation woi do

[nasone147]

I Legendaryslave!!! ;-)

[gero]

go with the emulator I mounted and goes to great and then you spend only the money and you're quiet,I have changed the various sensors in the seats, and I realized that on the stylus always have problems on a stylus and was changed for 3 times

[ugoboss]

guys the emulator that you buy in a network what is a resistance on the wire that tells the ecu that the place is occupied, then the emulator costs an average of 25-30 € a resistance much less.

[misterjoe]

Good evening guys, in reference to the failure of airbag, can you tell me what the cost might have to do to exclude the drivers from the controller with a few interface and software dedicated to someone? The car, as presentation is a fiat stilo 1.6 16V the year 2001. thanks