How to read the ducati hypermotard with kess2 clone

[Alfa159 q4]

Has anyone read any ducati with marelli iaw with the kess 2 clone?
I have the adapter cable 3pin, but once connected to the diagnostic socket of the bike, I don't know how to feed the kess.

[carmageddon]

I made a MV brutale with marelli diagnostic socket, 3-pin, withdraw the K-line with a reamer for use with a wire to connect it to pin 7, connect the + to the pin 16 and the - pin 4-5

[admin]

Has anyone read any ducati with marelli iaw with the kess 2 clone?
I have the adapter cable 3pin, but once connected to the diagnostic socket of the bike, I don't know how to feed the kess.

In my opinion you could use the cable fiat classic 3-pin cable to the kessv2, you just need to add the positive externally, I lho used on scooters sportcity 300cc with marelli control unit operating to perfezzione more has the two clips + and - to feed the kess.

[gezame]

hello
yes, use the cable fiat classic 3, sone iguale.

[Alfa159 q4]

Then I attach these 2 photos to better understand the connection I have made with the cable to the 3 pin cable to kess, the problem ? to feed it.
Connect the red connector output cable to the positive of the battery does not mark any voltage.

49634965

[Alfa159 q4]

The doubt that I had ? the color of the file between what comes out from the bike and one of the kess don't match as you can see in the photo...maybe they are reversed?

Carmageddon, you say you take the k-line from the 3-pin connector and the positvo-negative directly from the battery and connected by wires to the socket obd kess?

[Alfa159 q4]

Ok solved with the connection of caramageddon.
Then the wires of kess are reversed compared to the ducati, or the power supply ? correct give it to the red connector.

[dantesfx]

I made a MV brutale with marelli diagnostic socket, 3-pin, withdraw the K-line with a reamer for use with a wire to connect it to pin 7, connect the + to the pin 16 and the - pin 4-5

Thanks, useful also for me.
Tonight is going to be.