the map test 530d euro4 dpf

[garret]

hello guys as the title I tried to change the original file of my bmw, I'll post both files and go ahead with the criticism :) :cool:750[ATTACH]751

[admin]

Too low increases and missing several maps
iniez and correction
pres rail
iniez partialized 1
iniez choked 2
arr acceleration
pressure turbo parts from the lowest
injection, and almost nothing alzala
rail pressure alzala
also arricch acceleration
If you delete the fap do a thing pleasing to the engine and the turbine that will ringrazzieranno

[garret]

thanks admin prover? to change everything, for the dpf I take? in December after the revision, and then the mapper? to duty

[garret]

I have made further changes to the previous file, here is the result


ahead with the insults hehehe :p

[admin]

-Begins to take shape injection choked too low
-missing a map injection and correction
-turbo pressure should not be alzala the whole in the bottom and also at 5000 rpm, this engine also withstands 1.7 pressure turbo
-press the rail up
-review iniez partial map 1 and 2 and up ancha 5000
-I don't understand why the 5000 leave them gold?
-A council with the fap you have to stay as increases always in the medium to high otherwise clogging the fap

[garret]

in here admin I'm sorry, I thought, incorrectly, that increasing little rischiassi less than intasarlo, I put? commitment and let's see, thank you for the help you gave me until now :cool:
in addition, the 4500 doesn't get in the way of the automatic transmission ? for what I leave the original

[garret]

ok admin I tried to increase and further expand the map, before you told me to keep it to increments that are medium to high, but starting from how many rounds? now, I 1700/1750 with rail and 1500 with a turbo I'll have to start even more? top with rail? type 2000/2200 rpm? sorry for the trivial questions but the lack of experience is the mistress, even if I start to learn a little something :) here is the last step

[mavaila1972]

Increases all of the maps from 1500 rpm! Example, if you increase the turbo 1500 rpm also the map of fuel injection you have to start from 1500 rpm the same for the torque limiter, etc, etc.. automatic transmission eye in increments high on the torque limiter;)

[garret]

but I won't risk clogging the dpf? 1500 rpm I seem to be a few, ? so which maps?

[mavaila1972]

but I won't risk clogging the dpf? 1500 rpm I seem to be a few, ? so which maps?

I've done a lot of car so, of course, to 1500 in the map injection does not have to give the maximum increase in, but is to be given to my humble opinion, where there is the max torque of the car, is a machine that, if mapped well to fly:)

[garret]

you're right, I've tried a couple without dpf with egr by-passed and are monsters with time, perhaps, succeed? to make a decent map I hope

[mavaila1972]

you're right, I've tried a couple without dpf with egr by-passed and are monsters with time, perhaps, succeed? to make a decent map I hope

also flies with the fap I assure you that ecu?

[garret]

? a edc16c35 or c31 why? with mpps I have read the file by setting it to c31 while with the powergate I read it as a c35 why? the c31 does not ? this list

[mavaila1972]

map injection well parts from 1500 Rpm, and from the middle of the map to load to increase what software do you use to map?

[mavaila1972]

Watched the flight map is pretty good injection rail pressure too much, some of the maps need to be taken ori miss 1 torque limiter is missing the maps pedal if I'm not mistaken, and not made all the maps turbo and limiters!

[garret]

use ecmtitanium 1.61, which maps do I need to bring the original? the limiters of them, I touched them all for the turbo there are 2 maps pedal, what are they?

[mavaila1972]

use ecmtitanium 1.61, which maps do I need to bring the original? the limiters of them, I touched them all for the turbo there are 2 maps pedal, what are they?
I use winols as soon as I have 10 min you please post the addresses of all the maps from the tap!

[garret]

[msport (exil77grande)]

Watched the flight map is pretty good injection rail pressure too much, some of the maps need to be taken ori miss 1 torque limiter is missing the maps pedal if I'm not mistaken, and not made all the maps turbo and limiters!

sorry saw that you still have access to the attachments how have you seen the map? you have been sent by *****?
if so, I would ask the user garret comply with the regulation because even if the user mavaila1972 seems very correct and he should expect the 50 messages useful,thank you for your cooperation.

[garret]

msport I apologize for my mistake, not repeat it?, mavaila ? was courteous and helpful and doesn't deserve it, the idea ? game by me

[msport (exil77grande)]

msport I apologize for my mistake, not repeat it?, mavaila ? was courteous and helpful and doesn't deserve it, the idea ? game by me

ok let's pretend to be anything but just because you are 2 serious users.

[mavaila1972]

sorry saw that you still have access to the attachments how have you seen the map? you have been sent by *****?
if so, I would ask the user garret comply with the regulation because even if the user mavaila1972 seems very correct and he should expect the 50 messages useful,thank you for your cooperation.

I'm so sorry I just wanted to be useful to a member of the community aspect of the 50 post and only after the postero addresses a flashback maps from the tap, so that anyone can learn about that type of ecu

[msport (exil77grande)]

I'm so sorry I just wanted to be useful to a member of the community aspect of the 50 post and only after the postero addresses a flashback maps from the tap, so that anyone can learn about that type of ecu

now you're there and then go quiet.

[mavaila1972]

now you're there and then go quiet.

are 51 post but I can not download file

[msport (exil77grande)]

are 51 post but I can not download file


strange, try logging out and back,as you can see, the lettering of your nick and became orange, and below is now displayed average user.

[garret]

ok let's pretend to be anything but just because you are 2 serious users.

thanks 1000 do not repeat it

[mavaila1972]

ok view map let's start:p
Limiters, Torque:
0xcd120
0xcd74a
0xcd798
0xcd7f6
0xcd876
As you can see, there was not a limiter:p

[garret]

I with ecm, see 5-limiters, and I touched them all, or at least the program says to me cos

[mavaila1972]

increases from 1500 Rpm up to the end of you (the quantity of increase that you alone experience) be careful if it is an automatic:p

[mavaila1972]

I with ecm, see 5-limiters, and I touched them all, or at least the program says so?
checks to see if the address that I gave you

[garret]

the first 2 are ok, the third I 0xE4E5C the fourth 0xED844 and what speed? 0xCD5D0

[garret]

guys I have to replace the dpf on my bmw with a straight tube, my ? one of the first with a catalyst and a dpf are divided, does anyone know where to find it?

[msport (exil77grande)]

guys I have to replace the dpf on my bmw with a straight tube, my ? one of the first with a catalyst and a dpf are divided, does anyone know where to find it?

I would say that you are completely off topic to not pollute this post I'll open a new one in the suitable section.

[garret]

you admin you are right, I'm sorry, I open a specific one