magicmotorsport

[lucafrtdi]

hi all , I have products magicmotorsport that I use to work , I wanted to say that the magpro-base and x17 ,bdm v4 , are the products amazing , never problems we had and fabulous.*****plimenti !!

[msport (exil77grande)]

good luke,at least we have a feed on their products.

[gfr]

I can guarantee you that is not right so it goes,and good for the car is more classic but if you go over there stay evil trusted!!!! I am a bit disappointed!! subjective but

[msport (exil77grande)]

I can guarantee you that is not right so it goes,and good for the car is more classic but if you go over there stay evil trusted!!!! I am a bit disappointed!! subjective but

have you had or have their official products? we're not talking about clones, of course,actually companies and more advanced we are, but at least with them you have a good service and an affordable subscription.

[lucafrtdi]

gfr depends on what kind you speak , I speak of the whole magbase 5.2 , mag, x17 , bdm v4 ! I do not think you ? disappointed especially of the x17.

[davidehfnos]

hello, it seems to me all weird,,I I also own the tools of magicmotorsport,,,they are tranquillisimi known person....then bogdans and very good, always friendly and helpful......what kind of problem you had?????also the gear is very good never had any problems ever

[zioweb]

Azzo... Bad experience... The brothers gallett are ahead then...

[davidehfnos]

hello, I see that you do a little bit of confusion,,,,for the saab 9.3 is not really possible to read it with the old update had been wrong to write the protocol,,,,,had written edc16 c39 if I'm not mistaken, and is now ce the protocol right edc16 c8.......and this here it only writes and as the opel astra 1,7 dti........... for the audi a5 you have made in the boot???if you put in the boot trusted that you did without any problems.........the dodge that you say I do not and never capitatata but I think that if you're calm the protocol there is also a serial port maybe select another car,bdm is safe 100% ..........I assure you that to date with the updates made there are all the protocols ok......previously I gave you to reason, that a few cars had to do with the protocol of another but now I say that to 99% and everything is ok............also x17 in serial and inpeccabile,,,but with the old update there was a bit of istabilita of the sw(definitely problems with the windows)now, however, new drivers new sw and via I can assure you that we agree in all ways................on the speech that you said that the drive writes the hurts I don't say own, why? if there any problem even you write it to the ecu..........then let's not do all the herbs in a bundle we are of the car that the serial does not do it with any tool...........but the disassemble the make and via the bdm.........I can assure you that when I their gear(marked magicmotorsport)I never had problems and I have never sent back to the customer..........apart from mj8 that a day will come the new update, but these are things that are logical are always brand new car and we need to give time to develop

[gfr]

everyone thinks the way he wants !!! to me I do not even have the upgrade tell us about you and you can see I am ready to do it I see

[giarras]

excellent product, I do not say that x do advertising? Mr. bogdans but I think it goes very well.

[davidehfnos]

everyone thinks the way he wants !!! to me I do not even have the upgrade tell us about you and you can see I am ready to do it I see


See has responded directly to the director,,,do as you said and you will not have problems....................and then if you still have the tools without the updates are behind light years,,,,the officers serve propio not have these problems of instability....day after day are perfezzionati and without a subscription, you will not do anything

[zioweb]

Sorry for the provocation, but I got it wrong I or in the forum would be to avoid "advertising" like this? In the sense, ok that the voice of a manufacturer's official ? convenient, but we should not be with a girl "impartial"?
At this point, how ? been called Magic Motorsport (why? we both arrived alone here I do not believe...) would be to call the brothers Cock, the manufacturers of the MPPS, etc, etc,

[msport (exil77grande)]

Sorry for the provocation, but I got it wrong I have in the forum would be to avoid "advertising" like this? In the sense, ok that the voice of a manufacturer's official ? convenient, but we should not be with a girl "impartial"?
At this point, how ? been called Magic Motorsport (why? we both arrived alone here I do not believe...) would be to call the brothers Cock, the manufacturers of the MPPS, etc, etc,


hello,so as you can see, all that for me and' advertising' and' was cancelled and I called the person who arrived here invited by one of its customers have already signed up to our forum,in this forum we talk about everything that has to do with the remapping etc and then also the sig.bogdans is invited to participate when and how he wills, provided with respect for the rules,if you then want to use our forum or advertising, you can do it without problems prior to an agreement with someone of the admin and this applies to everyone,I hope I managed to explain.

[zioweb]

you explained very well, I must have missed your intervention in the post :) I fully agree and that was exactly what I meant.

[giarras]

bravo to our Administrator, the rules are to be respected and vaglono x all.

[davidehfnos]

we return to the theme nobody uses the products of the magicmotorsport??

[meccano85]

I have the magprog2 and use the software as the cmd technologies, and I have to say that it works on most machines, for example, on a renault laguna 2.0 dci 150 hp year 2010 in the process of writing not saved me the codes for the injectors, and, fortunately, saved manually, then tried again with the software cmd technologies and ? everything went ok......then, however, I made tatte drive with this interface and I have to say that ? very reliable!!

[davidehfnos]

I have the magprog2 and use the software as the cmd technologies, and I have to say that it works on most machines, for example, on a renault laguna 2.0 dci 150 hp year 2010 in the process of writing not saved me the codes for the injectors, and, fortunately, saved manually, then tried again with the software cmd technologies and ? everything went ok......then, however, I made tatte drive with this interface and I have to say that ? very reliable!!


we talk about the official of course, you which interface do you have???

[msport (exil77grande)]

obviously, the user meccano85 spoke of the clone,maybe soon, this forum goes in part with the magicmotorsport,;)

[meccano85]

This was easy to understand also saw your nick....you my ? a clone but not chinese and I just wanted to give you some news on my little experience

[msport (exil77grande)]

This was easy to understand also saw your nick....you my ? a clone but not chinese and I just wanted to give you some news on my little experience


you might be mistaken, because my nick if you know the bmw you understand that it has nothing to do with the company mentioned.

[meccano85]

ah....perfect'm a lover of bmw....I own a mini cooper d

[polini]

we guys but has anyone tried the mag pro2 with the new bravo mile (1.6 mjet 105hp ..............................................

[msport (exil77grande)]

we guys but has anyone tried the mag pro2 with the new bravo mile (1.6 mjet 105hp ..............................................

you speak of the clone or the ori?
the ori should not have any problems reading it.

[polini]

and the magpro2 clone

[meccano85]

made a 120 hp and 105 hp deffappate also ? everything went ok

[polini]

sorry you have the software magpro2 v4.2 x this morning, and got the magpro but without the cd, and I can not contact where I got it, I had to please print a file x my good that is already mapped, and I have not been able to do anything if someone can help me thanks

[meccano85]

you load it on a site and I'll give you the link....

[polini]

hello I need an explanation I from the list of magrpo2 clone there are self-written IDEA 1400 16V 95CV BOSCH ME7.9.10 WRITE-ONLY: write only, then this
The IDEA 1400 16V 95CV BOSCH ME7.3H4 BreakBox: that wiene made bdm...........................?

[msport (exil77grande)]

if I am not erraro the break box would be the mode with all the pins connected directly to the ecu and then to the bench.

[davidehfnos]

but with the tool and the official you BreakBox

[davidehfnos]

we guys but has anyone tried the mag pro2 with the new bravo mile (1.6 mjet 105hp ..............................................

hello, just yesterday I made everything as smooth as oil

[giarras]

if I am not erraro the break box would be the mode with all the pins connected directly to the ecu and then to the bench.


exactly!! remember well, in the program there are also directions for photos.

[polini]

can you show me the steps to do for the signs with the picture???

[msport (exil77grande)]

can you show me the steps to do for the signs with the picture???

let us fill you in:

http://img152.imageshack.us/img152/4049/ecuboschme73h4fiat.jpg (http://imageshack.us/photo/my-images/152/ecuboschme73h4fiat.jpg/)

[giarras]

can you show me the steps to do for the signs with the picture???

open the program folders and find the folder containing the photos

[davidehfnos]

hello the official will work on all clonazzo I don't think I own..................now with the new update have been added to many motorcycle

[scarface]

hi,you have written peugeot 307 1.6 hdi 110cv with control unit edc 16c3?
my can't write it

[scarface]

the official naturarlmente, just say some thing to palazzolo, or to bogdan that they don't go well you'll see ......I are doing even the update, and not a continuation .........even if you want to see it !!! and I take the cock of the original and new!

do you still have the mag 2?

[freddyecu]

I have the clone and it works fine..

[polini]

hi,you have written peugeot 307 1.6 hdi 110cv with control unit edc 16c3?
my can't write it

should write the test with the minimum speed, I have a 308 1.6 hdi 110cv eva well in writing,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,

[msport (exil77grande)]

hi,you have written peugeot 307 1.6 hdi 110cv with control unit edc 16c3?
my can't write it

you have read the mag clone?
at that speed?
possibly, as you have suggested the test writing by varying the writing.

[pal.car.racing]

what tools are of magicmotorsport?

[scarface]

you have read the mag clone?
at that speed?
possibly, as you have suggested the test writing by varying the writing.
you've read with the clone high speed
but also by varying the speed? nada.

[scarface]

[QUOTE=msport;1399]speak of the clone or the ori?
the ori should not have any problems reading it.[/Q
with the clone I have read 2 of those cars edc 16 c39

[msport (exil77grande)]

I'm sorry, but I doubt that you've read/written a peugeot 1.6 hdi with edc16 c39.

[scarface]

we are talking about bravo 1.6 mj 105

[msport (exil77grande)]

we are talking about bravo 1.6 mj 105

ah here we are,then ok.

[fabioefra44]

Sell the bdm?

[giarras]

it seems strange to me, but I don't doubt what you say, surely there will be? been some misunderstanding, they are a few miles from my home even though I personally have not ever had to do with their company,but the people that I know and that usamo their tools do not complain about it's effectiveness and even assistance, that apparently ? excellent, but maybe in my area.

[msport (exil77grande)]

hi guys,I know gfr,I guarantee you is not saying stupid things,in fact, had problems with the interface of the magicmotorsport....

carriuolo no one has said who says stupid things,but honestly, I don't see why prolong this argument,if gfr is not satisfied with this company that sells their equipment and talk to the trove,it seems that the magicmotorsport is among the most economical both as equipment that as the cost of the assistance belonging that offer an excellent service with helpdesk on-line that nobody,apart from this assistance includes the file type of immo off and fap off,now it is not for me to criticize or eloggiare this company, but I have a number of customers-employees who are their customers and they all have a very good service,of course, all and I mean all of the tools can have a hitch, but the important is to fix them, or god if you then look at the case of the equipment of gfr would be since the birth of the defective then, is another pair of sleeves, and I understand his regret,out here doing this, thanks.

[tezzero]

What do you mean as a possible agreement for advertising????thanks

[mattycar]

I have always got on well with the magicmotorsport.I have always seen in the immediate and when you contact them respond immediately.

[msport (exil77grande)]

What do you mean as a possible agreement for advertising????thanks

sorry I did not understand what you mean could you explain that?

[audi sp]

I would like to buy this product.. all in the business ? the only one that has an affordable price.. how does it work?
could I have more? information?
thanks

[fabioefra44]

I would like to buy this product.. all in the business ? the only one that has an affordable price.. how does it work?
could I have more? information?
thanks
I have magpro and x17,what do you want to know exactly?
I can tell you that they have a helpdesk nothing short of excellent and prompt service. Another thing that I have been able to assess that x17 works really well,reads and writes without worries of anything

[audi sp]

I have magpro and x17,what do you want to know exactly?
I can tell you that they have a helpdesk nothing short of excellent and prompt service. Another thing that I have been able to assess that x17 works really well,reads and writes without worries of anything
well.. I'm glad to hear the positive feed costs..??

[giarras]

well.. I'm glad to hear the positive feed costs..??

you can ask questions directly of them are present as a sponsor in the forum.

[fabioefra44]

you can ask questions directly of them are present as a sponsor in the forum.

Well said Giarras,c'? to say that in the period of Christmas, too, are discounts for a few days,but Bodgan ? very accommodating,you'll see that if you really care don't you go home without Magppro

[maxsek]

I confirm the support service ? immediate......the only flaw ? the slowness of the updates

[sportknight]

what is the difference? between mag pro and x17?

[scarface]

The mag pro basic Edc 15 and 16 and the other while x17 is Edc 17 and all the new ECU new generation of ir? law units with automatic change of the vag group, and has the function of retrieving ECU blocked

[sportknight]

of course, it makes even the edc15 and 16 right?

[maxsek]

no for edc15/16 you have to take the magpro2 base

[sportknight]

a,ok, thanks

[rodcraft86]

guys I reconnect to this post to know how to contact the magicmotorsport to get a quote, someone can? help me?

[ugoboss]

if you go on ****** and enter magicmotorsport you open all the pages that you want.

[rodcraft86]

I noticed but if I'm not mistaken ? one of the sponsors of the forum right? I would like to know if it is if there are discounts

[ugoboss]

I do not see several of the banners of the sponsors.

[msport (exil77grande)]

I noticed but if I'm not mistaken ? one of the sponsors of the forum right? I would like to know if it is if there are discounts

hello,until recently, were the sponsors of the forum, but they now have to invest elsewhere, even if our forum was among the pi? clicked then no facility.

[jack91]

with magpro can do the gp 90hp?

[jack91]

the meriva 1.3 mjt the I can read in the obd?

[maxsek]

the meriva 1.3 mjt the I can read in the obd?
you will also reads the micro if I remember correctly

[jack91]

we hope anke if the program is giving me zd13dt and that I have to do and zd13dtj

[jack91]

I have not been able to read

[cristianbomberos]

I took advantage of the Christmas offer to take the full? I'm still waiting for the response from the bank for the loan are anxiously waiting, but the answer still does not arrive, are passed to the pi? twenty-dd

[maxsek]

I took advantage of the Christmas offer to take the full? I'm still waiting for the response from the bank for the loan are anxiously waiting, but the answer still does not arrive, are passed to the pi? twenty-dd

very good purchase!......I hope you will come soon..

[angelolsp]

I think I take it too... :D

[rodcraft86]

it seems that it still has some bugs to resolve, especially on the new protocols

[manu90]

You have up to date news on this tool? It is still one of the best?

[lightning]

Hello esco a bit off topic to the holders of this instrument complete ,what you understand and what it takes to do this type of work ,and especially what the cost is +or- ,if you can give these info if not ignore it.