control unit identification

[davide2000]

hello to all,I should bring a ecu edc16 bmw 150hp to the original one, and in the pi? put in the correct value for the air mass meter.
I wanted to understand how do I know what? the map ori correct.I in the control unit the individual num base 7789572 n programmed 7790796
in the section ori bmw there are a lot of maps, but for the 150hp there are many numbers that I don't know what they are.

[zaga1]

The items that the laws of the two identifiers are the code of the software and the hardware of the ecu, or the ecu, you need to read the last three digits of both hardware and software revenues and the ori of the unit that you are interested in hello let me know how ? way ;-)

[davide2000]

when doing the reading with the galletto 2 mi from central data ecu 0281010565 1037351788 edc16c31

[zaga1]

when doing the reading with the galletto 2 mi from central data ecu 0281010565 1037351788 edc16c31

And then the file that you are looking for ? 565-788 this ? the code, or, on the contrary 788-565 let me know if you can find him I if c'? I had you I willingly anyway, we hope that you find it

[davide2000]

the file I found but I have to erase the writing.luckily I left the original file in the database and I'm leaving everything as it was.
many thanks for your collaboration.a beginner like me and a great help.

[zaga1]

the file I found but I have to erase the writing.luckily I left the original file in the database and I'm leaving everything as it was.
many thanks for your collaboration.a beginner like me and a great help.

I'm sorry, but if you put the file ori must funzuonare to strength except that the file that you downloaded ? damaged or understanding to the maximum you have to try again by selecting the correct drivers, and see what goes, and then the voice erase writing means writing cancelled anyway try and let me know if you want to repeat in the forum we are to help one another, and I repeat today, that you have need of me, and tomorrow ki knows if I avr? need you anyway for nothing ;-)

[davide2000]

or tried 2 times and the same result.unfortunately, from the site I still can't download I miss the number of messages.
how can I do?

[zaga1]

or tried 2 times and the same result.unfortunately, from the site I still can't download I miss the number of messages.
how can I do?

Listen to do one thing, wait until you can download your messages and after that risxarica the file, it seems to me impossible that it works

[msport (exil77grande)]

attention that bmw is not like the other houses that take a file with the same numbers on both hw and sw, and the write I would say that before giving information you should know about the thing otherwise it is better not to write crap to increment the counter of messages and to do damage to anyone who reads and beginner,also depending on the programmer used, you may change the size of the file or the data within the file, although the same size,however, if as I believe I have understood you have to put the mapping of a bmw to its original state, you need to read the file,procurarne one with the same requirements ,to compare it in the area maps, and bring it back to the original values, then in a few words rebuild your file read and rewrite the same,I hope I was clear.

[zaga1]

attention that bmw is not like the other houses that take a file with the same numbers on both hw and sw, and the write I would say that before giving information you should know about the thing otherwise it is better not to write crap to increment the counter of messages and to do damage to anyone who reads and beginner,also depending on the programmer used, you may change the size of the file or the data within the file, although the same size,however, if as I believe I have understood you have to put the mapping of a bmw to its original state, you need to read the file,procurarne one with the same requirements ,to compare it in the area maps, and bring it back to the original values, then in a few words rebuild your file read and rewrite the same,I hope I was clear.

Sorry msport but until today what I recommended that I take the hw and sw to know the file ori just me ? always work and then believe me that is not the fact for the counter na bens? for a council, then think of what you want

[davide2000]

you msport very clear.I'm adopernado the galletto 2.but to be able to bring his file to the original state it takes a suitable program ?because I, with the program of the galletto I can only take the data read and reprogram it.but I can not see anything, and what? inside.

so even if I take the file to the bank data ori can't get it work why? I have to adapt to her right?

[blackwolf76]

I'd say download the file with the cock by the ecu of the car and then from there it goes back to what you need.

Identifies the driver right on the cock, then do the ecu id and if you recognize you can do is read the file and save it on your pc, then say so on the forum.

[zaga1]

you msport very clear.I'm adopernado the galletto 2.but to be able to bring his file to the original state it takes a suitable program ?because I, with the program of the galletto I can only take the data read and reprogram it.but I can not see anything, and what? inside.

so even if I take the file to the bank data ori can't get it work why? I have to adapt to her right?

Or just that you can read the map file and complete the open with ecm titanium to see the exact code

[legendaryslave]

Email the file that you read you have to rebuild your file why? the bmw for the same hw and sw can have cks different around here

[zaga1]

Email the file that you read you have to rebuild your file why? the bmw for the same hw and sw can have cks different around here

You ma ? also true that the checsum once you have edited the file to change in any car not just bmw pebso that it is normal that I know of

[legendaryslave]

I have not expressed correctly, if you upload a file ori taken from another control unit also having the same hw and soft but a cks a different processor, not the quadrera the thing, and then not you'll find? l integrity? of the file and there will not be? consent to start-up, and then if you get a file ori rebuild the areas that were changed in your file ,I hope I have been of help

[zaga1]

I have not expressed correctly, if you upload a file ori taken from another control unit also having the same hw and soft but a cks a different processor, not the quadrera the thing, and then not you'll find? l integrity? of the file and there will not be? consent to start-up, and then if you get a file ori rebuild the areas that were changed in your file ,I hope I have been of help

Then you say you are recommending as I understand to take the gold one downloaded open it and overwrite the values values in the mod file the original of the car's origin cos? by not having trouble with the checksum, and without the need of corrergelo or am I wrong? Anyway if you ? cos? could do it and work it works the same with this method ;-)

[davide2000]

to open the file with what program?

[zaga1]

to open the file with what program?

If you open the ori downloaded with ecm titanium, and immediately after you upload your mod files, you can transfer the settings and the settings from the ori that your without problems

[davide2000]

but the program ecm titanium ? easy to find?

[zaga1]

but the program ecm titanium ? easy to find?

I bought some time ago why? ? the one I use to make maps, open files etc.

[davide2000]

that number of software has ?what? the pi? up-to-date?there are also mappings gi? ready?

[zaga1]

that number of software has ?what? the pi? up-to-date?there are also mappings gi? ready?

I have version 1.61 with almost 20000 auto loaded maps you'll need to do this ? a software pwr edit it with all the drivers to compare the set of maps

[davide2000]

I time ago I bought the dvd and the c? well as the version 1.61 of 2000 a little bit of a walk, it seems to me.

do you know if there is a program that gives you the configurations as you thrust mild and moderate ,in the ecu?

[zaga1]

I time ago I bought the dvd and the c? well as the version 1.61 of 2000 a little bit of a walk, it seems to me.

do you know if there is a program that gives you the configurations as you thrust mild and moderate ,in the ecu?

Then I can guarantee you that ecm titanium not ? of the 2000, and you're probably confusing it with some other software I from experiencing I would advise you to take it at least the version I have and I will make your experience comparing the file ori with the modified one, and maybe from the beginning to the map, perhaps by purchasing a map made by a person more? experiencing ecm there are two versions one ? ecm2001 and the other much better, and more and more? up-to-date ? ecm titanium, very software that will make the map automatically until today I don't know

[zaga1]

I time ago I bought the dvd and the c? well as the version 1.61 of 2000 a little bit of a walk, it seems to me.

do you know if there is a program that gives you the configurations as you thrust mild and moderate ,in the ecu?

Here is the version of ecm titanium of which I speak to you I

[davide2000]

Here is the version of ecm titanium of which I speak to you I

I still can't see your files.
anyway, I ecm2001 and not titanium

[zaga1]

I still can't see your files.
anyway, I ecm2001 and not titanium

For this we say unto you, that there is a big difference

[davide2000]

I see if I can trovarlo.sai if you need other programs to change the ecu's?

[zaga1]

I see if I can trovarlo.sai if you need other programs to change the ecu's?

Then the programs you use to edit the maps, there are many, but to my knowledge the best that, until today, has tried ? ecm titanium

[davide2000]

ok, thanks a lot for the information.from beginner ? the discovery of a new world

[gizmo]

Then the programs you use to edit the maps, there are many, but to my knowledge the best that, until today, has tried ? ecm titanium


I zaga1 I have ecm titanium and being a beginner I'm trying to understand how it works compare ori and mod edit values etc etc... if you find it, take it ? very useful

[davide2000]

you have taken in the forum?do they sell it?
then you're like me looking to understand how it all works

[gizmo]

you have taken in the forum?do they sell it?
then you're like me looking to understand how it all works

I have purchased.... exact davide2000 I'm trying to understand how it all works

[msport (exil77grande)]

I have not expressed correctly, if you upload a file ori taken from another control unit also having the same hw and soft but a cks a different processor, not the quadrera the thing, and then not you'll find? l integrity? of the file and there will not be? consent to start-up, and then if you get a file ori rebuild the areas that were changed in your file ,I hope I have been of help

it's pretty much what I wrote in the previous page, but I know that you did not understand.

[msport (exil77grande)]

I think you guys are going from broad beans, chickpeas, then we remain in a topic.

[davide2000]

in the meantime I found a dvd with ecm titanium 1.61 and another ecm titanium 1.61 a written ecm4freesetup with date 06/07/12
while the other titanium.exe date 15/05/12 you know what is the difference? I stay clear of them all and two.

[blackwolf76]

no... they are always the same around, maybe someone has changed the name or the graphics of the screens, but the base ? always the same of those around.

[davide2000]

ok grazie.li I try and let you know.
I doubt written on the freesetup

[Sbymotta]

To stay on topic, do you know the existence of some table or other where you can go back to the type of control unit on the basis of the hw and sw of the ecu?

[davide2000]

I have seen tables with n umeri units and matches but I do not know if ? what you're looking for .expects the response from experienced people

[Sbymotta]

I know indicate where you saw?
Thanks in advance.

[davide2000]

sorry for the delay of the risposta.io I have seen in a dvd attached to the cock 2.ma how they work, I don't know.

[zaga1]

sorry for the delay of the risposta.io I have seen in a dvd attached to the cock 2.ma how they work, I don't know.

Sorry guys but what kind of tables are you talking about? If you let me understand if I can try? to help you

[davide2000]

"""""To stay on topic, do you know the existence of some table or other where you can go back to the type of control unit on the basis of the hw and sw of the ecu? """
this was the question asked?

[Sbymotta]

In a few words, such as codes of hw and sw identify the edc15, edc16 and other...

[zaga1]

In a few words, such as codes of hw and sw identify the edc15, edc16 and other...

The code of the ecu is formed by combining the last three digits of the hw and sw beds date ecu fomando a unique code consisting of 6 numbers

[Sbymotta]

Yes, maybe I explained it badly, I make an example: 565-788 = edc16.

[zaga1]

Yes, maybe I explained it badly, I make an example: 565-788 = edc16.

That code that you wrote ? obtained with my example, or that the proceeds in the ecu data?

[Sbymotta]

I got it from your example in the first page of a unit if I'm not mistaken BMW. I have rewritten to better understand what I was looking for.

[zaga1]

I got it from your example in the first page of a unit if I'm not mistaken BMW. I have rewritten to better understand what I was looking for.

The important thing is that at the end, you understand ;-)

[Sbymotta]

Let me explain better still, if I do a adv. id to a control unit or read from the body of the unit the numbers of hw and sw, and how to read around in the forum I will take the last three digits how do I know what kind of ecu ??
always by faith, to your example:
565-788 = ???

...I know that ? a edc 16 just because? I read from your example, but on the basis of the hw and sw of each unit how do I figure out what type of edc

[Friar]

There is no table, and many times what you read on the body control unit does not match what c'? inside

[blackwolf76]

Maybe do a ecuid with a programmer, and in a moment it should tell you what you have to do.

[Sbymotta]

Ok, thanks 1000.

[flamingsn3Ak3r]

I join to the topic.

I wanted to know how to identify the various units of both petrol and diesel engines of various brands.
In the forum, at the time, I have come across only and frequently in EDC15-16-17 and as a user I explained
the evolution of the ecu bosh for the Diesel.

[blackwolf76]

Once you start practicing you will know which unit they mount the drive on the basis of the models and families, and maybe even visually. Or you connect with a programmer and do ecuid and you will have the info you need.