View The Full Version : exclude the egr on the alfa 147 ecu edc15c3
hi everyone, I'll post the file where I ruled out the egr you tell me if ? well done... thanks to all
in the rar you will find the file ori that the mod file without egr
Hello.. c? something that doesn't square with the name of the ecu.. C3..
I do not know that is a c3 but with a c7..
tell me one thing.. horses ? 8 valves ? .. however, the closure is not to be
8 valves.... 115 hp diagnostics I c3.... but the map c7.... ? one thing that I can not even understand.... where am I wrong in closing?
but that uses as a diagnostic ?
autocom with delphin 2013.1
to the touched curve, that nothing do to with it.. injection what the center on the egr.. with the titanium c? the control duty cycle.. it only works in that area... all 12000
let's see if I figured out how to do...... so ? right?
let's see if I figured out how to do...... so ? right?
the values 12740 I let them stay there, I had to change to 12?
no no we're not.. you said before.. ragionaci on what to do..
I took the area of the egr duty cycle and I brought all the values to 12000 except 12740 that I left them unchanged.... :( :(
where am I wrong?
put it all to 12000 leave nothing unchanged
here it is all up to 12000 ;);););)
so we should be
test on the car.. do you know
Hi to all guys, but that I know to be able to close the egr you need to enter the maximum value of the table all the entries section of the injection phase for the edc 15, or am I wrong?? Why? 12000???
Monday? return to the house and I are on holiday from today, but on all the cars cos? you or only x this ecu?
But if you're using the software on the Car but the ecu is able to close the egr?
Monday? return to the house and I are on holiday from today, but on all the cars cos? you or only x this ecu?
I speak to you for edc15 to the other control units there are different processes, but similar anyway try and let me know
But if you're using the software on the Car but the ecu is able to close the egr?
Car software we could do, but sometimes nn i succeed, and you have to close it manually and then I will at least for those that I know farr I prefer to close them manually since I feel more? safe
Ok perfect, there are some automatic system, such as the software?
Ok perfect, there are some automatic system, such as the software?
Software type ecusafe carsoftware voltaloader do it only if you are the pi? professional to be 100% safe manually ? the recommended procedure sapenso for each type of ecu gl iindirizzi from the tap through the graph in 2d or by values
Thanks zaga1 but are the first weapons, and the graph in 2d I don't read well yet
msport (exil77grande)
19-07-2013, 20:00
Software type ecusafe carsoftware voltaloader do it only if you are the pi? professional to be 100% safe manually ? the recommended procedure sapenso for each type of ecu gl iindirizzi from the tap through the graph in 2d or by values
ecusafe does exclusions egr.
msport (exil77grande)
19-07-2013, 20:01
here it is all up to 12000 ;);););)
so we should be
I have not seen the file, but if you have to put the maximum value that should be 12740 and you've set to 12000 the file is incorrect and the egr will always be a little bit open.
ecusafe does exclusions egr.
I'm sorry, msport, but I was wrong to write in the confusion sometimes can? happen ;-)
Thanks zaga1 but are the first weapons, and the graph in 2d I don't read well yet
In essence, opening the voice, egr duty cycle, or injection phase, for example, first open the chart without modifying anything, and you'll see a red line that he did****lli on the basis of how the file is ori ? set to generated, but once you change the values all at 12740 retry to display the graph and you'll see that the li ea red sar? straight until the end, and begin perhaps to understand what is happening a vokta closed the egr on the 2d map and you say to give you a clue since I can't yet post anything to make you see the difference between ori and egr closed on the 2d test and let me know what do you notice as the difference by changing the values of the table ;-)
I was told to do so, the file had tuttivi values 12740..... which values you have to put?
Thanks zaga1 Monday? he returned to the house to do?
Thanks zaga1 Monday? he returned to the house to do?
Nothing gizmo we are in a forum ? right and a duty to help others where you can? ;-)
I usually over a 2-bit from the tap to the controller..I always put everything to 12000, and it has always worked... or better.. this should work
Guys sorry then, I just thought I need to 12000 a 12740, and I have to tap the other?
Alfa159 q4
20-07-2013, 09:36
You have to bring everything to the max value! Then make 2 accounts.
Audi sp if you tap the switch, you can also do other than move the duty cycle..
elettro72
20-07-2013, 10:11
it seems to me that you can't see all ste domande...........in edc 15-just take everything to the max value of the map in the ecm called phase iniezzione that your ? set to 12740 and then brings everything to 12740...........
it seems to me that you can't see all ste domande...........in edc 15-just take everything to the max value of the map in the ecm called phase iniezzione that your ? set to 12740 and then brings everything to 12740...........
Hello elettro72 if you see the file in the first post and everything 12740 me and was told to change it to 12000 also made this change now carry everything in 12740
You have to bring everything to the max value! Then make 2 accounts.
Audi sp if you tap the switch, you can also do other than move the duty cycle..
you also.. but usually, I do the same
children then what should I do?
children then what should I do?
Gizmo you will have to open the original map after that go to the item egr duty cycle, or phase injection on the basis of as it is called in the voice of your map and port values in the table to the maximum value that is read immediately before change as explained, if the maximum value ? 12740 you have to bring all the boxes to 12740 if utikizzi ecm titanium, just select them all in the top right where there are commands where ec is the percentage that you can choose the etc even more? to the right of the ec to a colorful figure of the green the red the click once you have selected all the check boxes and write the value 12740 press enter and you will see that all the items you will bring to the value you have selected and if you then open the chart you will see that you will create? once you have made the change of the boxes that the red line will stay? straight across*how much equal from the beginning to the end with respect to the ori that I advise you to see the difference between the ori and the mod...............ok?? Let me know
thanks zaga1 lighthouse as you say and see what happens
I took the area of the egr duty cycle and I brought all the values to 12000 except 12740 that I left them unchanged.... :( :(
where am I wrong?
You have to bring all the boxes to 12740 and you'll see that it works
You have to bring all the boxes to 12740 and you'll see that it works
already done I just need to load the file into the machine....
already done I just need to load the file into the machine....
Ok then do it and let us know ;-)
guys, the file is loaded, which in theory has the egr excluded and I do not see substantial differences, in my opinion, no... now or in the egr working or I don't feel anything.... I forgot to bring the diagnosis with me for him to try the egr and see what I said...the lighthouse soon
Alfa159 q4
23-07-2013, 17:29
B? what were you hoping to hear?
I was hoping to have a little more ready under.... but by inexperienced what should I notice?
I was hoping to have a little more ready under.... but by inexperienced what should I notice?
NOTHING according to me!
:D
THE EGR is closed, especially with the heat changes very little to ****s performance on a 1900, of course, if everything works fine in the engine.
The closes to prevent ir? that whole "contamination" of the part of the exhaust affected, not so much for the yield...
NOTHING according to me!
:D
THE EGR is closed, especially with the heat changes very little to ****s performance on a 1900, of course, if everything works fine in the engine.
The closes to prevent ir? that whole "contamination" of the part of the exhaust affected, not so much for the yield...
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.