legendaryslave

16-07-2013, 21:37

hello to all the forum I have a problem on a toyota yaris, petrol, 2005 with the control unit bosch, basically, the customer has lost the keys to using the car prog I managed to discover that practically enough to do a reading of the 95080 of the engine control unit, after that, it should be possible to program the new transponder. Then I am prepared to buy two new trasonder type JMA TPX1 glass as suggested by the soft of zed when caricavo the dump of the ecu of the engine, proceed with the programming of the trasonder that goes to a good end, and that when I try to re-read to me from the data, but when mo put it around the antenna I start the machine the two questions at this point, I have to do I have the wrong type of transponder, what I can, once written to the transponder and is made or can be re-programmed?, tomorrow I am attaching the dump of the ecu the engine.
of course there is no way to make total sense not I would proceed in this direction,thanks for any answers

electrones

Hello fellow
transponder:
Id: 4C Texas
Type: JMA TPX1
Put the date key 1...
Engine ECU Dump

legendaryslave

You are the one that I used, but the programming is successful, the trasonder is.also recognized by the zed, but the car does not recognize it, and I started by reading the ecu, engine 95080 the soft recognizes the file and the keys programmed,bo something wrong I or escapes me something

electrones

What? the error code when diagnose??

cinqueturbo

hello to all the forum I have a problem on a toyota yaris, petrol, 2005 with the control unit bosch, basically, the customer has lost the keys to using the car prog I managed to discover that practically enough to do a reading of the 95080 of the engine control unit, after that, it should be possible to program the new transponder. Then I am prepared to buy two new trasonder type JMA TPX1 glass as suggested by the soft of zed when caricavo the dump of the ecu of the engine, proceed with the programming of the trasonder that goes to a good end, and that when I try to re-read to me from the data, but when mo put it around the antenna I start the machine the two questions at this point, I have to do I have the wrong type of transponder, what I can, once written to the transponder and is made or can be re-programmed?, tomorrow I am attaching the dump of the ecu the engine.
of course there is no way to make total sense not I would proceed in this direction,thanks for any answers

No this is Not a Joke.. In an attempt to steal the car sti gentil men have taken away the ECU the engine..
can you tell me how to solve even finding a ecu to place in its place?
I you give him a notion on this Toyota Yaris?
Thanks :)

todos

hello to all the forum I have a problem on a toyota yaris, petrol, 2005 with the control unit bosch, basically, the customer has lost the keys to using the car prog I managed to discover that practically enough to do a reading of the 95080 of the engine control unit, after that, it should be possible to program the new transponder. Then I am prepared to buy two new trasonder type JMA TPX1 glass as suggested by the soft of zed when caricavo the dump of the ecu of the engine, proceed with the programming of the trasonder that goes to a good end, and that when I try to re-read to me from the data, but when mo put it around the antenna I start the machine the two questions at this point, I have to do I have the wrong type of transponder, what I can, once written to the transponder and is made or can be re-programmed?, tomorrow I am attaching the dump of the ecu the engine.
of course there is no way to make total sense not I would proceed in this direction,thanks for any answers
Hello, if I'm not mistaken the reading for the programming of the machine, you must read immobox...

nimex

beware that some yaris gasoline not all, do not have immobox, then it is easy to make the scodifica total from the e2prom of the controller, it happened to me yaris 1.2 with ecu bosch who have lost all the keys written to the e2prom is the game!