problem on audi a4 edc17cp14

[147q2]

guys I have a problem on this audi a4 2.0 143cv edc17cp14... and was removed the fap is from the ecu and physically .. and diagnosis by error 0014, and clogging up to 50 % ...what can be ? thanks to ki I give? a hand

[SandroMarciano]

according to me, no ? full I out 2-bit in ir?

[msport (exil77grande)]

luca stanca hurt and still code dtc disposable.

[147q2]

can you give me a hand to take it off ?

[marcogti]

on some edc17cd14 there are two bytes in the sequence, both to dec 256 to take 000

however, then I'm on edc16 before writing the file with the luca stanca performs the adaptation with vcds for the replacement of the dpf, from inside the channel 01 engine then c'? adaptation and with the latest versions tells you to bring back a channel depending on the car at a value of 0.

[faberecu]

we simulated replacement fap , then everything is ok on a4 and A5 before luca stanca , attention to the sensor differential pressure , must be functional even if you don't need + break always , the best price in the Audi

[marcogti]

Hello riesumo this discussion to ask for a clarification since I have to order a straight tube for a luca stanca of a4 but I have noticed that there are two connections for the differential sensor. Therefore you are? I ask to those who has already? made if, as it says in faberecu just that it is only connected electronically and running, or if it should just, however, to measure the pressure of the exhaust ? I would not order a tube that then do I need to change

[baraldino]

You just need to be connected electronically