Sign in

View The Full Version : request info for scodifica ecu DELCO Opel


lalo
08-07-2013, 09:20
Hello guys !

I have undertaken recently this branch and of course I need advice....can anyone tell me how scodifica (with what software) to a control unit Delco DZJN mounted on the Opel Meriva 1600cc ??
You do it by reading the file via the OBD ???


thanks in advance for your collaboration
jolidj
08-07-2013, 13:03
no you can scodificare, you have to find another ( if you and broken your) get the pincode and schedule another ecu.
lalo
08-07-2013, 13:33
Ok, my problems, and I had the thought to precisely replace it; but how do I find the pincode ???
thanks
jolidj
08-07-2013, 13:44
the pincode ( carpass) you can buy the opel ,30e, or if you have carprog you do get the code,or read the processor inside the immo box and revenues the pincode. the + fast and buy the code for opel.
legendaryslave
08-07-2013, 14:00
Quoto colleagues you can get the pincode from the reading of any ecu eye only warning before installing the new ecu must be made virgin with opcom or tech2 on the machine donor, with his pin code otherwise does not encode
lalo
08-07-2013, 15:03
Ok; thank you all for the valuable advice...... you are fantastic !!
giary74
26-09-2013, 20:41
I apologize if I'm stepping stone to the discussion, but I also have a problem with an ECU DELCO a Tigra 1.4 1995.
The situation ? a little confused since? the owner has lost his only key. The mechanic has ordered the Opel a new key for that ? been provided with a new pin code, but the old unit is not transposing.
Reading the previous post, I realized that you must riverginare with opcom or tech2, but I do not understand what it means to "on the donor machine"...
Could someone enlighten me? Thanks
legendaryslave
26-09-2013, 22:09
If the key ? was taken up with the chassis number and the pin code is found to be correct ecancelli the old key and insert the new thing feasible even with a good diagnosis, multi-brand, otherwise you have to start out by reading the box code or the framework tools and carve the pin code to access the special functions Dell immobilaiser , the engine control unit must be made virgin, in case you go to burglary and get a used one you have to riverginarls with opcom or tech2 before disassemble it from the vehicle tamer otherwise you can not with figurarla on the vehicle receiving
giary74
26-09-2013, 22:47
Thanks to Legendary, I think I understand...
It seems that the unit in question, now removed from the car, but until some time ago, working perfectly, not the original one since? gi? replaced for problems in the code.
Question: since? the procedure of vergin ecu of the control unit involves the use of the car, I could replace the ECU on the car, and riverginarla with OPCOM or TECH2. Done to us?, the central ? ready to accept the new code.
It is feasible the thing, or ? pi? simple try to see in demolition if c'? a control unit with key?
Thanks for your opinion.
legendaryslave
26-09-2013, 23:58
the problem ? always the pin code if you can access the special functions of the engine ecu ? made can you riverginarla also on another machine with code that is not aligned
giary74
28-09-2013, 09:51
the pincode ( carpass) you can buy the opel ,30e, or if you have carprog you do get the code,or read the processor inside the immo box and revenues the pincode. the + fast and buy the code for opel.

Forgive the ignorance, I would just like a clarification:
from how I understood the immo box ? integrated in the ecu, but ? a device part.
If ? cos?, where it is installed?
With OPCOM can't read the pin code from the processor, or do I need a programmer type willem?
How many legs has the processor?

Thanks for the patience.
jolidj
28-09-2013, 13:43
immo box would be (on the opel) built-in cn the ring that reads the transponder from the key, the ignition key then.
opcom nn reads processors, on opel old can get the pincode, on youtube there is something of the kind.
for your pincode, you have to read the mcu inside the immo box and from them find the code.
for 30e I advise you to buy it from opel. if nn 6 practical mcu then nn is worth the effort.
giary74
28-09-2013, 19:13
immo box would be (on the opel) built-in cn the ring that reads the transponder from the key, the ignition key then.
opcom nn reads processors, on opel old can get the pincode, on youtube there is something of the kind.
for your pincode, you have to read the mcu inside the immo box and from them find the code.
for 30e I advise you to buy it from opel. if nn 6 practical mcu then nn is worth the effort.

Thanks for the explanation; I have seen the movie on youtube, where it is low-cut the chip from immo box and read, but ? a job that I would prefer to avoid...
Surely a 30 euro to opel are a good investment, but I'm afraid that is not enough cumunque why? it seems that the ecu and immobox are not ir? the original perch? replaced due to previous problems with the code. The new key, sorted the opel with the card pincode on the base of the frame, does not coincide with that of the ECU and immobox... What can I do? And' possible to make a scodifica total cos? I remove the thought???
Thanks
giary74
06-10-2013, 20:42
Ok solved with the method pi? fast.
The owner ? went in demolition and recovered everything.
Thanks to all for the advice.
The prox.