map g.punto 1.2 some info

[michele30]

I'm trying to understand the logic of these units and how it works, gives me some info on this map?
what are the curves out of the driver?

[jolidj]

as for maps, there we are. l-advance ( x personal experience ) nn exceed 3 degrees x scrocchia if nn mistake should be 4nr 1 degree .
if so, you have given 4.5 degrees celsius .you can try it anyway, if nn is well-ahead foul progressive parts 2 and finish at 3 or + degrees.
try it nn will be a missile, but something comes out.

[michele30]

the maps out of the driver can you tell me please what are that you do not know?

[jolidj]

you touched you . advances, injection , suction ,foot control what ec or less in the driver, I don't know , I don't use them.
have you tried the car??

[michele30]

this ? a test that I'm doing to get to know the curves from the tap.
could you tell me please what are the various curves that I mod.?
for example, the map pedal ? :68268 to 6845E right? it works on the whole map, or e.g. from 50% load to max?
the aniticipi as what are for the driver calls all in advance

[jolidj]

you have touched maps without knowing that the maps are??? or have I misunderstood??

[michele30]

no this map I found from the website and I'm trying to understand what are the maps and how to work on these, can you give me a hand^?

[jolidj]

To behold. I don't know which maps you find the driver. Make a list cn address and the map then let's figure out the maps out of the dr.

[michele30]

ok then, let's start from the driver:
from 68268 to 6845E = pedal?
from 68460 to 685DE =
from 689AC to 68aa7 =
out driver
from 6a766 to 6a960 =
from 6afc5 to 6b204 =
from 6d38d to 6d48f =

here are the addresses

[jolidj]

68268 x 2 injection.
689f0 x 3 advances
6a750 suction or lim torque .
6aff0 x 3 suction
6d390 pedal ac.

this according to me. anyway, I advise you to study the maps, no info no you can make a mod, even if a draft .

[zaga1]

Sorry guys, I should make one of this great point, but I don't understand one thing that with the galletto v2 I read a file from 576 kb, and to open it with ecm titanium I had to cut 448 kb for? to be able to rewrite the file with the changes I have to riallungarlo 576 kb or don't need??? And if c'? need how do I do that??? Thanks for the help

[pdtechnology]

I tried this map and the car is not to be crashes, and error suction pressure....I also tried to bring back gold maps suction and lim torque but the problem decreases but persists tell me what you think

[zaga1]

I tried this map and the car is not to be crashes, and error suction pressure....I also tried to bring back gold maps suction and lim torque but the problem decreases but persists tell me what you think

Hello pdtechnology with which programmer you have written? In that mode? Have you run the cut file?

[pdtechnology]

I read in boot mode, and written with kess v2 original, however, I'm attaching the various mods that I have done and the problem persists