Scodifica total Piaggio Nesux 500

[ecutano]

Raga hello , you give me a hand with the scodifica of this unit iaw15p E4 mounted on a Piaggio Nesux 500 , s? where to begin do you have any idea if ? can run the scodifica ?

[darksoulbreaker]

also of interest to me to know s? ? can scodificare these ecu.

[giarras]

you can scodificare quietly, both those that fit the old 15 and also the miu that are in the throttle body.

[darksoulbreaker]

the cock v2 okay?
I'm starting to be a little cn the scooter and bike...

but if I only have the ecu available and not all of the bike...with the cock, v2, can you? however, to put your hands on?

[giarras]

the cock v2 okay?
I'm starting to be a little cn the scooter and bike...

I advise you to buy the sw interface with the Scooter should cost very little, and does it all automatically, I the my the I have given away but a friend of mine in palermo has bought from little, in fact if you read in the forum c'? was a user that was in need of scodificare a 15p and has solved to a great start, look for the discussion that you'll find them all.

[giarras]

https://www.professionalchiptuning.net/showthread.php?641-aiuto-scodifica-iaw-15P-E7-piaggio-beverly

here, this ? the discussion.

[darksoulbreaker]

what? this interface and its software?

[giarras]

what? this interface and its software?

it really is called so?:
The Scooter.

[msport (exil77grande)]

it really is called so?:
The Scooter.


do you have a link for purchase of this equipment?

[giarras]

do you have a link for purchase of this equipment?

I should have it somewhere, the person who sells it ? quite helpful and immediate assistance a few months ago has made the change to the sw, at my request, x the miu2.
tomorrow I try everything ? place.

[giarras]

[darksoulbreaker]

I am not able to find that a programmer...look forward to seeing you giarras :)

[giarras]

I am not able to find that a programmer...look forward to seeing you giarras :)

I posted the link to the Italian distributor,go on his website that you can find all the details.

[darksoulbreaker]

I'm sorry giarras...but this strimento ASW only works for reading?
why? c'? a note in red where it says:
NOTE: THIS DEVICE IS NOT CAPABLE OF PRODUCING A TRANSPONDER. SERVES ONLY FOR the READING OF THE DATA, THE CODING OF the TRANSPONDER SHALL BE PERFORMED BY A PROGRAMMER TRANSPONDER TMPro2.

[giarras]

I'm sorry giarras...but this strimento ASW only works for reading?
why? c'? a note in red where it says:
NOTE: THIS DEVICE IS NOT CAPABLE OF PRODUCING A TRANSPONDER. SERVES ONLY FOR the READING OF THE DATA, THE CODING OF the TRANSPONDER SHALL BE PERFORMED BY A PROGRAMMER TRANSPONDER TMPro2.

the tool that I had read and then riscriveva the processed file with their sw..x the transponder exists programmer adequate..anyway to get in contact with them, which will give you elteriori information.

[darksoulbreaker]

ok, thanks.
;)


the tool that I had read and then riscriveva the processed file with their sw..x the transponder exists programmer adequate..anyway to get in contact with them, which will give you elteriori information.

Giarras I'm sorry, but these ecu (marelli) not the law, and he also writes the rooster v2??:confused::confused::confused:

[giarras]

Giarras I'm sorry, but these ecu (marelli) not the law, and he also writes the rooster v2??:confused::confused::confused:

the law is the cock that the kessv2, but also other, my intervention ? state xch? they asked if you could scodificare and here comes the problem, how do you do the scodifica in the file?, I are in possession of the sw, which is spoken of in the previous post and found free nn but have never been able to change the length of the file that need? the sw x to make a correct processing and return it to the extent that it needs the serial before mentioned, you could continue to try, but believe me nn it's worth, the interface nn the coast so if you do 3 of scodifiche have taken your money.

[darksoulbreaker]

You're right giarras...at the end with 3/4 scodifiche recover the money you spent

[mirks]

Guys I had entrusted to a friend of giarras of palermo, who then advised me that interface.. With 220? you take it home and read you the micro without having to open anything, directly from the k-line. After that you can riverginarla and rewrite it using the button in the interface.. Really very useful and easily pays for itself

[mirks]

Thanks again giarras for the help and the contact �

[giarras]

Guys I had given to a friend of giarras of palermo, who then advised me that interface.. With 220€ you take home and read you the micro without having to open anything, directly from the k-line. After that you can riverginarla and rewrite it using the button in the interface.. Really very useful and easily amortized

I'm glad that you are good.

[cicciocar]

this tool is used to read and write those type beverly 200 liberty and vespa..

[giarras]

you ciccio also makes those and also the aprilia and ducati.

[coma]

The tool is very good, but someone knows how to do immo off on the MIU?

[tonynet5]

salveva all open discussion after a long time.... if it is not too much.
I bought the tool in question,but I would like to know if I can riverginizzare
the miu 32/4 and' if to do it, I have to read the flash completes, or you only need the data key.
thanks a lot in advance