PDA

View The Full Version : Total IAW 5nr2.c2 renault clio is not possible??



angel
14-06-2013, 10:16
Hi all , I have a problem with a scodifica total on the suddeta ecu, really? to me it looks like they have done other programming 95160 and cutting the wire L4 and connected to the M4 and L4 in the ecu.
This does not want to leave if you did not hear the key code, does anyone know if the models do not ? feasible total?? It seems to me that on some renaul can not be done.
I enclose the reading originale4468


Thanks for now

legendaryslave
14-06-2013, 19:39
try this solution without removing anything

angel
15-06-2013, 12:45
Thanks 1000 legendaryslave Monday? I try and let you know!!!

dadal
has anyone tried this file

dadal
hi, why i cant download no file on this forum, you Need The activation or somenthing else ?

glittering chiffon party dress.fitted
Not part because it does not turn the starter or what, personally I got it after changing the ignition system.
You have to get the + 30 of the ecu on a 15/54,change the system of the relay which controls 50 hertz.avv.everything in the box, fuse, engine compartment.
The only side-effect as almost always with scodifiche total to each power-off framework, the ecu does not store the parameters autoadattativi and having a throttle body motorized problems to the ignition to get the engine turn lasts 3 or 4 minutes, then everything is ok

dadal
Not part because it does not turn the starter or what, personally I got it after changing the ignition system.
You have to get the + 30 of the ecu on a 15/54,change the system of the relay which controls 50 hertz.avv.everything in the box, fuse, engine compartment.
The only side-effect as almost always with scodifiche total to each power-off framework, the ecu does not store the parameters autoadattativi and having a throttle body motorized problems to the ignition to get the engine turn lasts 3 or 4 minutes, then everything is ok

thanks mate, but I dont understand, I use ****** translate,the translation is very bad.
I have 2 pieces 5nr2.c2 ecu, I swapped eproms ( 95160), original eprom soldered to the second donor ecu , no problem with car key and immo, but car have dont now ignition ! I thought the swap was enough..

do you idea about reason ?