SMART 800 deleting the egr

[davidehfnos]

good day guys, anyone has experience on the smart 800 disel???do I have to delete the egr, I did this test but I don't know if it's good:cool::cool::cool:

[magi1984]

take this information with pliers...in your map, there should be a switch at the address 6c3c5, put the value of ZERO instead of ONE, and forgive what you have touched thee, as in the original.
then test the file if you want to do an experiment

[msport (exil77grande)]

a long time ago a customer with the same machine body section has asked me to delete the egr valve and I tried the classic panettone or something like that without positive feedback, so I let it go,now the information magi1984 I don't know that the source has but it would be nice if davidehfnos can test the address,in the case of positive feedback, I put the discussion in relief with the screen in the appropriate section of course by magi1984,looking forward to your news.

[magi1984]

that information ? for the SW version 351696, and says that the address 6C3C9 c'? the switch
the file with that version of SW ? state uppato on the forum by meccano85

the one highlighted ? address 6C3C9 and should correspond to the switch

in the map of david the number of SW ? different, but the sequence of numbers ? to the address 6C3C0, and the magic number for the switch is to the address 6C3C5

[msport (exil77grande)]

thank you for giving more explanations, but according to our rules, I deleted the link,however in that forum you must be registered and then it would not be served equally,for the rest it looks good info and let's see if david resolves in case, we put in relief.

[davidehfnos]

take this information with pliers...in your map, there should be a switch at the address 6c3c5, put the value of ZERO instead of ONE, and forgive what you have touched thee, as in the original.
then test the file if you want to do an experiment

Thanks a lot now I go to the workshop and try and see if it freezes the value of the egr and see if it goes well, as I have done

[magi1984]

no it's not okay, you have set to zero the 6c3c4
also I do not know why? you have changed the values around the address 07000

I am allowed to modificarti the file cos? you can compare it with yours to see the differences

[davidehfnos]

ecm does in the car and I know that the chek

[magi1984]

ecm 2001 or ecm titanium?
I use the titanium original and I assure you that it does not automatically change that

[davidehfnos]

just tried the l"egr continues to work

[demolitionMan]

hi guys I also have the same problem! someone have a solution?thanks

[msport (exil77grande)]

In this post there and not tested test and see if it works and if you update the post.

[demolitionMan]

In this post there and not tested test and see if it works and if you update the post.

the guide ? gi? been proven! it seems not to work! Greetings

[msport (exil77grande)]

it may also depend on the number of hw and sw no pain, no gain don't you think?

[demolitionMan]

it may also depend on the number of hw and sw no pain, no gain don't you think?

I think... but I have already? tried to do what it says in the guide! .
but nothing.

[guidotacco]

tap it physically,gi? the fact

[pinotec]

hi guys I also have the same problem! someone have a solution?thanks

try this..do you know if is ok

[demolitionMan]

try this..do you know if is ok

I'm sorry... I put the new egr and the customer has fixed the problem!..I can not? try it.. it was a tourist in my part..

thanks anyway..

[freddyecu]

those numbers 10 1 1 00000101101130 swich egr sostutuendo 1 with 0, but where do I go with ecm titanium amrendo the files? graxie in advance

[freddyecu]

No one can? help me understand how to edit the file Smart 800 for the egr?always thank you in advance

[freddyecu]

If the caps with a plate without it, according to you, it's not okay?

[msport (exil77grande)]

No one can? help me understand how to edit the file Smart 800 for the egr?always thank you in advance

as you know, there is the example, but it does not work on all but up to you when you are not operating you can see.

[magi1984]

yesterday I removed the egr to a friend via bit switch, he tells me that the file ? working and the egr is not working more?.
if you want to see the file I attach ori and mod

[munro]

the guys are mod works or not?sorry but I did not understand very much..

[davidehfnos]

hi magi confirm that this solution is not going at all...tried this morning, the valve works always

[magi1984]

send me the original and I'll send you another solution, test it and if it works we

[tt225]

To be able to close it from the map ? it is required that the motor of the egr is fully functional and connected to the wiring

[Team electronics]

at the end we are able or not to close it!!!! I I have previously tried, but with negative results!!!

[tt225]

Closes closes

[davidehfnos]

here is the file
thanks in advance;);););)

[tt225]

I can not download it

[magi1984]

here, try and let us know

[fabioefra44]

here, try and let us know

I take the id of the ecu and can you please post the file to try,since I can not download it,will? definitely why? I have made other, and the diagnosis does not move from 0%-1%

[fabioefra44]

I checked my archives and I had the original file,I made the closure of the egr ,try and let me know. Those that are made have the egr perfectly closed

[frantik3]

however, on the smart if the flangi not from any error in diagnosis)))))

[frantik3]

given that we are talking about smart on this drive with the same sw you ? the limit bit turbo pressure?

[fabioefra44]

however, on the smart if the flangi not from any error in diagnosis)))))

This was not the sense of the post,I think that it is better to learn how to change the maps that you learn how to make the platelets to plug the egr,don't you think?

[frantik3]

exact excuse, however, the file fabio works well surely and that the area of the egr))))))
I can't move the limit of 1.3 safety pressure turbo since I have one with turbo plus and beyond 1,25 can't go moving the wastgate!!!!!

[tt225]

I think it will be? due to the pressure limiter as a function of the temperature, maybe the cold also keeps up to 1.4 bar to warm you limits 1.1-1.2.

[frantik3]

Do you know where in the map

[tt225]

Yes , of course, should I try to find the original and give you the address.

[frantik3]

Thank you, however, the ori, and in this topic, however, on another ecu of the 800cdi not edc16 are almost all the same

[tt225]

6D29C sw 104, this I can not download it

[frantik3]

Thanks I'll let you know

[tt225]

I figured with pleasure

[fabioefra44]

exact excuse, however, the file fabio works well surely and that the area of the egr))))))
I can't move the limit of 1.3 safety pressure turbo since I have one with turbo plus and beyond 1,25 can't go moving the wastgate!!!!!

have you tried it?

[frantik3]

as I try place, and I think at the end of the week

[frantik3]

egr ok to work the limitation no!!!!!!!!!!!!!!!
however solved in another way

[fabioefra44]

egr ok to work the limitation no!!!!!!!!!!!!!!!
however solved in another way

The limitation turbo? I have not touched that . However, how you fixed it?

[frantik3]

No it was on my file, and addresses tested given to me by tt225

[msport (exil77grande)]

No it was on my file, and addresses tested given to me by tt225

sorry frantik3 could you be more precise?
then the egr off ok maybe if places ori and mod is better and to overcome 1.4bar of boost?

[frantik3]

Monday? that I'm back in the workshop I withdraw ori and mod only the egr!!!!
While some smart review sw g04 have implemented in the sw ir? points of protection for do not exceed the pressure more than 1.4 while overwriting the sw revision g03 everything goes back to normal

[dvdtuning]

Then this c'? a map that works for egr off on smart 800 cdi?

[explode82]

I know that c'? a control bit, if we talk about the smart edc15

[fabioefra44]

I know that c'? a control bit, if we talk about the smart edc15
The edc15 are all similar to the egr off


sorry frantik3 could you be more precise?
then the egr off ok maybe if places ori and mod is better and to overcome 1.4bar of boost?
EGROFF,I am certain that it works,doesn't it ? the first smart. However, available. For the pressure limiter turbo should be a map, and 3 similar,I'm going from memory,but if you need to control. Even if the problem ? always the limitation for the download of the file........wait for the threshold of 80 messages.
:)

[msport (exil77grande)]

Monday? that I'm back in the workshop I withdraw ori and mod only the egr!!!!
While some smart review sw g04 have implemented in the sw ir? points of protection for do not exceed the pressure more than 1.4 while overwriting the sw revision g03 everything goes back to normal

you forgot to post ori and mod.

[fabioefra44]

you forgot to post ori and mod.

What do you need? SMART I have them almost all available......

[vitis]

since I have violated the rules I have to read it for good

[msport (exil77grande)]

since I have violated the rules I have to read it for good

since the regulation you're infischiato I'll give you a call that remains in your profile,the second come banned for 1 week to 3 definitely.

[vitis]

I apologize ,I hadn't read or didn't remember this part of the regulation,since it was a simple request without a file ori *****s, I apologize!!!!!!!!!!

[msport (exil77grande)]

What do you need? SMART I have them almost all available......

I do not need anything I said frantik if he was posting a ori and mod of example, with the elimination of the egr tested, but apparently he has written Monday place, but do not know they de which month of which year.

[frantik3]

I'm sorry if I haven't posted even why? I have not had the pi? time to test it for now walks with a flange and no damage as I put them in the file with egr off

[puppypunto]

hello guys I can check the file to the closing of the egr smart diesel?
posted

[aladino81]

hello as I am struggling myself with a smart 800 cdi to close the egr valve according to me and better to use winols
also, because you can easily find the funyione of the egr valve !!!!

[aladino81]

hello fabioefra44'll give me a straight bit for the 161.855 vers 5.1 kindly thank you!!!

[Errecinque]

hello as I am struggling myself with a smart 800 cdi to close the egr valve according to me and better to use winols
also, because you can easily find the funyione of the egr valve !!!!

Yes winols does wonders.....and then if you can find it now could you post the solution and making it available to the forum! Or confirm that the attached file two years ago the above is correct.

[jack91]

you have to put a -1 in the phase of the injection (called by ecm)

[aladino81]

I solved with a ltra final solution and one scwitchoff but the valve should remain with them, however, you take away the famous error valve jammed

[jack91]

I from the injection phase the call from the ecm

[aladino81]

hello, but you talk of edc16 and I'm not talking to him about the edc15 that the ecm does not vederela injection phase