remap micro-car ligier

[coma]

Hi guys,
they asked me to remap a micro-car Ligier diesel.
I know that mounts Marelli electronic (those of the 1.3 Mjet fiat, for instance) but I don't know where to start from.
Anyone has ever done it?
Advice? Aid?

Thanks in advance to all!!!!
:)

[ecuboost]

but how many horses you have to earn that? anyway, read the ori, and we see

[coma]

I need some certainty: for example, if you read it in the BD M, or in another way, how much ? large the file is read, etc, etc
Ninth, do I risk to damage on the ecu and after that you'll find? from the demoman!!!!
thanks anyway for your interest.

[motorsport]

hello coma,talking with a friend some time ago, the made, a lombardini engine 400cc, marelli control unit as g.p is mounted on a memory spansion, therefore, bdm,increase max 10cv, it should give you a file to be 2!!

[coma]

Ok already? ? a starting point!!!!
:)

[msport (exil77grande)]

I have made a personally time ago 440 lombardini,the control unit is identical to the marelli 75hp same thing is said about the size of 2m,now with the kess v2 original after about 1 hour of reading I had the file is perfectly compatible with the titanium official made the map taking a cue of what I do on the 1.3 mjet I'm going to write but nothing,in the end I contacted alien who, after many tests he told me that he read it in the bdm seen that are very hairy,read and written in the bdm and then if you are in the m... we have a backup but surprise, I say to you that I have done something like 6-8 step because unlike what I do on the 1.3 mjet here I have given 3 times as much to make it smoke a hair and start to feel the difference,however, what I did was 74kmh and having the change, even from mapped was always the 74kmh only after the map at the same point starting from a standstill with 2 people in the car was 10kmh and once you have made the change that now opens, we are at 105kmh,hope that help.

[coma]

Perfect!!!!!!!
If I can't find the drivers on the Titanium to help me with the address?
Thanks anyway!!
:)

[motorsport]

if a 440cc cmq tita recognizes him for? from the few info you need to mod out drv'll give you some addresses,egr 0841bc,lim couple 08467c,sett 089eda,lim coppia1 08d6de,lim coppia2 08d6fe,pedal 08f382 + similar 08f4b2,mod and 8-bit rail 0905552 + lim rail 090714 !!

[coma]

The mythical!!!!!!
:)
Next week I think I get it
Will update

[Dragonfly]

azzz that little box to 105 km / h and get crazy, if you put two mini-skirts to the sides fly!!!!

[msport (exil77grande)]

do not worry about anything in particular, even if touches those 4 things are fine you just have to go overboard with the injection and that's it.

[blackwolf76]

I know there are the handcuffs for those who tampers with those cans of tuna:D;).

Seriously I don't, I would go there already? heavy if to drive normally ? some guy.

[rebirthafterrevenge]

I know there are the handcuffs for those who tampers with those cans of tuna:D;).

Seriously I don't, I would go there already? heavy if to drive normally ? some guy.


in the end we must see it as a job! also a map with a normal car could create digrazie..

[explode82]

at the end for? I always believe that a p? of consciousness we must have it we also mappers.......purely personal opinion

[blackwolf76]

not ? told that we need to force us to many problems, for? a people that are traveling that way in the hands of inexperienced drivers ? very dangerous...
we always talk about minors..

[msport (exil77grande)]

guys back on topic,however, even after having mapped I tell you that you can't hear a big difference takes them slightly before, and with the change in stretch a bit more about nothing in particular and is more dangerous than the same people that it's made of tissue paper.

[msport (exil77grande)]

https://www.professionalchiptuning.net/showthread.php?3357-ixo&p=47591#post47591

[zzapp]

Hi all, I have a friend that would like to remap the ecu of his Ligier JS50 engine Lombardini 400cc from 5cv LDW 492 DCI. The machine is equipped with a control unit Kohler K ED3C2965.

I wanted to know what interface and software for reading/writing data is the most suitable to be used for the above-mentioned model, and if there was someone able to rimapparla, and I will send you the file. I have included the kess, ktag and wing nut.

I look forward to your support.

Thanks!