opinion the map citroen jumpy 1.6 hdi 90cv edc16c34

[magi1984]

if you want to give her a look, this morning I made this map with tuning and exclusion of the egr valve
the middle ? still one of the ones without fap

until Saturday, I have no chance? write it down to try it :mad:

[admin]

Very soft
as the map you can raise + the press rail bring it back to gold and up parts from the lowest rpm 1250 19 load at least a 4%
the lim press rail up at least 5%
limit torque from 1000 or 1250 up
missing limiter pres turbo 1EA748-1EA866
when it comes to diesel, can you give more and more low
press turbo back golds and up to 19 of the load at a constant

[magi1984]

legendary, thanks :D

[magi1984]

sorry admin but the limiter pressure the original turbo ? all to zero ? flat
how should I go up?
raised around with a constant value, for example, 130punti? given that as an increase in the maximum pressure in the turbo I have now given 120punti

[frantik3]

I can not see the file for even less of the total messages, but the limiter, and difficult, and zero otherwise alzalo of at least 120 points

[magi1984]

look here, ? just to zero (click to enlarge)

http://s11.postimage.org/6tb5k3dof/Immagine.png (http://postimage.org/image/6tb5k3dof/) http://s11.postimage.org/niclg0a9r/Immagine2d.png (http://postimage.org/image/niclg0a9r/)

I had changed why? I didn't know what to do.
I have not done a lot of files so far, but a limiter to zero I had never seen

[frantik3]

give me info hw and sw numbers unit

[magi1984]

unfortunately I do not have the means nor the ecu on hand to give you the number of hardware,I'm sorry
the number of sw ? 1037386162
the middle ? a jumpy 1.6 hdi-2008 90hp edc16c34, the same engine as the peugeot expert

[frantik3]

however, I think not having that file, but having the other of the same type of unit that the limiter turbo not ? the one that tells the ecm but weighed a lot more at the top of the management turbo so even if increases of 200 points go quiet that doesn't give you damage

[magi1984]

ok thanks, I that "limiter" the get up too...then as soon as I try the machine will tell you if it explodes or not
:D

[frantik3]

I do not toccherei

[admin]

sorry admin but the limiter pressure the original turbo ? all to zero ? flat
how should I go up?
raised around with a constant value, for example, 130punti? given that as an increase in the maximum pressure in the turbo I have now given 120punti

You can raise in a constant manner if you are given 120 points
alzalo 130

[admin]

however, I think not having that file, but having the other of the same type of unit that the limiter turbo not ? the one that tells the ecm but weighed a lot more at the top of the management turbo so even if increases of 200 points go quiet that doesn't give you damage

This is the imitator I have for the titanium and it works tried it on other
car and ok

[frantik3]

raise the turbo over the 2.5 bar and see that the damage does not ? what why? his main and set to 2.5

[mavaila1972]

You can raise in a constant manner if you are given 120 points
alzalo 130

I over-pressure turbo do 30mbar more turbo pressure

[msport (exil77grande)]

I over-pressure turbo do 30mbar more turbo pressure

usually do something more on the limiters rail pressure on the surge pressure turbo I make it equal to the pressure turbo,then everyone has their own idea, but it is + or - all right.