Error p2279 Opel corsa opc

[oakley1]

Hello as the title of a friend complains about this error in the deceleration phase, i.e. is a pull and release l accelerator bang and the error with the cutting power and finch? it does not extinguish with the diagnosis remains....to someone ? happened to you? L wording of that error ? the loss in the circuit d intake...I have thought of some pipe from the air filter on, but I said that ? everything ok...the machine does not ? mapped and air filter original pulls fine but in release the light comes on....that is the egr the problem? Maybe the crashes and re-opens well?

[blackwolf76]

or the pressure sensor manifold... or even the butterfly aspiration that remains a little closed. You should check the values in the diagnosis when the defect.

[oakley1]

Thanks black, I now don't I have on hand, but soon return in Sardinia, if not resolved I give him a hand

[r6raven2010]

you the fault code ? loss of air in the entrance... checked sleeves? the egr I don't think that you return with this...? by a subsidiary in the diagnosis if it opens and closes

[oakley1]

The sleeves are ok, thanks .... L egr are you looking for that it doesn't find it. Maybe h problems to open.

[r6raven2010]

how many km is it? pu? check the air pressure of the actual with the theoretical and compare them and have the assurance that there are no leaks...

[magi1984]

same problem on an opel zaffira, at the end after checking cvhe the car mechanics it was perfect, I removed the egr, swirl and error p2279 from the ecu :)

[oakley1]

Hello Magi.. Also I am inclined to think that there is some problem with egr.... I have to see it dim. person for? ? do a log at the time of the error to see a bit more? in detail what happens.... This morning, sar? at home then we step

[rego88]

news? for the case on the car??? I have a friend with a corsa opc 192cv that has mounted the popoff and tells me that he also happens to him is what.... does anyone know how I can do to work around this problem?? thanks!!

[oakley1]

Hello so we have removed the pop original... All okbrana intact and no vent.. Lalla sbraca a little hard and we replaced it with a a little bit more? tender tested the machine made. Error . However, today the
I call and I feel a little...
The problem with the pop after pu? be the spring preload is excessive then try some of the other thousand of the kit or in the case of those adjustable spercaricarla. Let me know

[tronic]

you tell us that depression you have in the intake manifolds and the value of the potentiometer egr panel access

[oakley1]

I don't have the car in hand I see if ? yet the bosch service

[tronic]

ok
let us know, and don't forget the change of the signal mass air flow sensor in the timing of which is controlled egr valve
hello

[oakley1]

The corsa opc is not ? equipped with egr valve

[tronic]

you're right, I hadn't read the drive

[rego88]

but the magi said that it has removed the egr and swirl..... maybe you are wrong with the diesel??? here we are talking about z16ler 1.6 turbo 192cv right???