Luca Stanca Lancia Phedra

[egs]

Hello, I ? ever happened to you that, upload the file to a Lancia Phedra 2.2, with the control unit EDC 15C2, Ecusafe 2.0, at the end of the modification will not create any file defappato to save?

[Backgroop]

hello post the file in question cos? we took a look at..

[magi1984]

do not select fiat or lancia but select CITROEN, you'll see that it works

[egs]

Mmm... why? if I try to change it back to Peugeot the change...Then I have to do it with a Citroen?
This ? the file ori:

[magi1984]

you have to do it with citroen or as peugeot, ? equal
with fiat or lancia does not change why? however the ecu ? PSA

[Backgroop]

you have to do it with citroen or as peugeot, ? equal
with fiat or lancia does not change why? however the ecu ? PSA
I fully both the unit as a whole of the electronic management and both the engine belongs to the group peugeot/citroen PSA

[egs]

It is in fact then I made it with the Peugeot, which makes the same change on a Citroen...No I ? seemed strange, this thing...Thanks for the help.

[Dragonfly]

It is in fact then I made it with the Peugeot, which makes the same change on a Citroen...No I ? seemed strange, this thing...Thanks for the help.

No it's not strange, I know, is that this car is made in collaboration with the PSA group, as well as other car made in the past years.

[Alfa159 q4]

ecusafe usually works well, and time often leave out something.
check that the dpf are 2 bits to zero in the double
for the egr one, always double

[egs]

No, strange in the sense that, the voice edc 15 c'? also on the Fiat and Lancia... I know that ? equal to the Citroen and Peugeot the same plant, but there is the protocol I thought that was good also as PSA.

[Tinturia]

ecusafe usually works well, and time often leave out something.
check that the dpf are 2 bits to zero in the double
for the egr one, always double

But being a EDC15 disabling the EGR valve not bringing to the maximum value, the curves of the injection phase?
I attach a file where I made the luca stanca with Time. Could you tell me if it's okay?Do I need to open a discussion in the section from time to Time?
Thanks

[SandroMarciano]

on c2 if you pull the line straight to close the egr a few times d? failure...

[Tinturia]

In the sense that the deactivation can but can? happen that some of the times in case it's faulty?

[Alfa159 q4]

No, in the sense that these are not closed cos?, there are 2 bits that eliminate the management of the egr.
For the luca stanca I have not seen the file, but ecusafe ? pi? reliable on these.

[Tinturia]

Unfortunately I do not have the ecusafe. I loaded the map with luca stanca made with Time and not have appeared errors, which lights are on or the other, the machine seems to work well. The changes that make the software seem to be in line with what is written in the discussion. The egr I left it alone for the moment.

[Alfa159 q4]

Unfortunately I do not have the ecusafe. I loaded the map with luca stanca made with Time and not have appeared errors, which lights are on or the other, the machine seems to work well. The changes that make the software seem to be in line with what is written in the discussion. The egr I left it alone for the moment.

Well, if it touches the 2-bit you're set.

[msport (exil77grande)]

But being a EDC15 disabling the EGR valve not bringing to the maximum value, the curves of the injection phase?
I attach a file where I made the luca stanca with Time. Could you tell me if it's okay?Do I need to open a discussion in the section from time to Time?
Thanks

direo not to go off topic.

[Tinturia]

direo not to go off topic.

I apologize. The next time you open? a new discussion.

[enzopezzano]

Ecusafe on Peugeot edc15c2 works if the car has no problems of temperature sensors FAP and sensor pressure differential.

[thekid]

Hi all, I have done this luca stanca on a phedra I wanted to ask who ? pi? exp me on this car if you ? correct.
The file ? was tried with Ecusafe who say they go well on these cars.

In the package c'? the file ori from the database, the file is written (read) that ? the one with the mod on iniez trip that I read in the car, and what I defappato I using the file that is read by the car. I wanted to know if the mod ecusafe ? correct why? the car has a lot of problems that we are solving a p? at a time.

6529

[maxsek]

Hello ecusafe on edc15c2 psa works correctly you can go quiet

[thekid]

Hello all a question do you think this file ? correct??? It seems to me there are a few areas to touch??? ? x the case of an exclusion via the bit switch as a modus operandi??

8306