Sign in

View The Full Version : Learning code ima fiat bravo 1.6 mj '11



rondella72
03-05-2013, 23:20
Hi to all,
After replacing the injectors with autocom cdp pro 2012.3 are entered in the engine diagnosis I have also read the fault codes, and up to here everything is ok. But when I went to make the learning for the injectors
and arrived to enter the code IMA software hangs, I tried again several times but to no avail.
Someone ? managed to do this learning ? the autocom that is not the f

legendaryslave
03-05-2013, 23:35

carlo abarth
03-05-2013, 23:49
on the m-jet, there are managed by the injector number 4!!

rondella72
03-05-2013, 23:58





on the m-jet, there are managed by the injector number 4!!

using the autocom? you had the problem?

legendaryslave
04-05-2013, 00:03


if you don't have another diagnosis to try, then I would recommend a process a bit convoluted read e2p ecu file 8kb with the programmer make the virgin and, therefore, will also reset the encoding injectors after that try to riscrivergli with your diagnosis, but if you woi spicciere go to any of your acquaintance with different diagnosis from your test

cicciocar
05-05-2013, 21:06
Hello,but the injectors are new, or taken in a spascio.

sno74
05-05-2013, 21:51
a very important thing, the voltage of the battery I had the same problem I solved it by connecting the power supply to the battery when you do these types of programs, or encodings do not use the antenna, but the usb cable....

rondella72
05-05-2013, 22:45
Hello,but the injectors are new, or taken in a spascio.

I have replaced the engine, the old one had two rods bent so as to have aspirated a p? water.

rondella72
05-05-2013, 22:47
a very important thing, the voltage of the battery I had the same problem I solved it by connecting the power supply to the battery when you do these types of programs, or encodings do not use the antenna, but the usb cable....
Sorry, but then autocom this learning?

blackwolf76
06-05-2013, 00:30
Autocom should do it without any problems, although I have always used the bosch and it has never failed, if not for my fault that fraintendevo the letters you type.

Not ricvordo well as functions the autocom, but the bosch from the possibility? to enter one at a time or all together, in the second case you miss the most? time, to? you have less hassles as in the case of a typing error in one of them takes none.

sno74
06-05-2013, 00:30
I don't have auto-com I other testers, but I feel that many speak about good and my intent was to help the tension in these proceedings ? important then to connect the instrument with the usb socket, I think that try does not cost anything....

rondella72
06-05-2013, 14:51