marelli cdc clone

[duke]

hello, I started to feel some friend that you begin to find the cdc clone someone has already? purchased or has any info on ir? because someone told me that f? only the marelli cars and nothing more?

[coma]

to me comes in the week.
really the has already? took a friend of mine and told me that ? identical to the original in everything.
wait a few days still
:)

[bart]

Can I ask what is this tool? Only scodificare the ecu marelli, or even to read and write to map them? :confused:
Thanks! :)

[coma]

Also to read and write
Do other things.
For example, reads and writes to the E2p marelli M6j in the obd
You will find on the CDC's website (the house of the counts km)

[sno74]

interesting to those who have bought it if it keeps us informed with...

[alex68]

I provided the link in pm thanks I want to give us an eye

[sno74]

to me, if possible in pm thanks

[bart]

Also to read and write
Do other things.
For example, reads and writes to the E2p marelli M6j in the obd
You will find on the CDC's website (the house of the counts km)

Then ? a very interesting tool! :)
It can work on any model Marelli? Car or motorcycle?
The reading is then made real, and not virtual, as other tools?
Of course, I imagine you work exclusively on these ecu and not on those of the other manufacturers, right?
Thanks for the info! :)

PS: sorry if I have so many questions, but I tried the link of the company reported by the coma, but I have not found where it speaks of such a tool...

[bart]

interesting to those who have bought it if it keeps us informed with...

Quoto, and I would add to the request :)

[coma]

the official tool can be found on the internet: the house of the counts km padua (CDC)
the clone tool I found on the link deleted on the recommendation of a friend who has bought it and I guaranteed to work.
Should arrive tomorrow, fingers crossed!!!!!!!!!
:)

[legendaryslave]

the official tool can be found on the internet: the house of the counts km padua (CDC)
the clone tool I've found it on Immediately, on the recommendation of a friend who bought it and I was guaranteed to work.
Should arrive tomorrow, fingers crossed!!!!!!!!!
:)
mauro mo, you'll get a brick
hahahahahahah
let us know how it goes

[sno74]

not a brick weighs a beautiful box of chocolates
hahahahahahah...
I can't find ad you can post the link, he'll throw an eye....

[carlo abarth]

to the max for not doing it rattristire sent kebabs!!!!hahahahahah;)
mauro mo, you'll get a brick
hahahahahahah
let us know how it goes

[coma]

link deleted

[coma]

mauro mo, you'll get a brick
hahahahahahah
let us know how it goes

We start to think.....
Should arrive today....
:)

[sno74]

paid with pay pal the picture ? nice if) great software as the photos go well..

[coma]

I don't understand....
however, a couple of friends already? the have taken.
must be equal to the original one.
On the contrary: a user qu?, has the cdc, the original, got one for a friend and for a special treat staff has tried it with the original sw and it works well.

[sno74]

then also the 5sf8 without boot mode, say the bench with spjna dedicated when it arrives let us know if including all adapters....

[sno74]

the package arrived....
;)

[coma]

still no
he sent me a registered letter
in practice, st? arriving on foot.
if I knew the I sent the courier :(

[sno74]

ok we are trepitosi then a few more days.....:rolleyes:

[duke]

coma aggiornaci ? arrived works as v?!!! for me to say that even on the bosch indicated goes well

[coma]

Sorry!!!
?' arrived yesterday and I have already? did several tests on the ECU Ducati and you ? behaved very well!!!!

[duke]

very good then, of course, if they had problems at this time they would not have worked

[sno74]

well then acts as a.... I'm glad it looks like a good tool....

[coma]

Do you think that a friend passed me an update and it works well!!!
When I connected the interface ? updated the firmware (I made him in that moment)
and then it worked great!!!!!
C'? the cable for the 59f and plug in the Obd
The box is like that of the Mpps

[sno74]

I can post a picture of the object...
? one of the insertion....

[coma]

now I can not take a picture.
however, as an aesthetic ? a MPPS
do you have a skype contact?

[legendaryslave]

now I can not take a picture.
however, as an aesthetic ? a MPPS
do you have a skype contact?
if dovese serve I know who to bother then :cool:

[coma]

if dovese serve I know who to bother then :cool:

ovviamentee no problem!!!!!!!!! :)

[baraldino]

But With this device it is true that you can turn a 59fm3 in m5 or vice versa?
And, above all, the 5am by the pe sk (point methane-panda methane)
You can also write flash changed?
Thanks

[coma]

You can? do everything that you just said, providing you have the file.
Unfortunately, not ? including a database

[baraldino]

you can also do the scodifica total m 1.5.5?
I have a friend who works with the bike and I was wondering, according to you, you can transform 5AF at 5AM?
seen the considerable difference in price
hello, thanks

[coma]

Hello,
Unfortunately I don't have an answer to everything!!
:)
We should try.
If you want to send me an ECU I do, and try

[linus146]

hi seen that the months have passed from when you started to use it, can you tell us now how you are and what are the limits of this tool?
thanks

[coma]

At present the limits I have found.
It seems to work perfectly for us? that declares the constructor

[ecutuningpro]

the cdc marelli ? a great tool, I use it for years and never did anything wrong.

[linus146]

I have the previous model that worked on a 59 f and is really a useful tool

[m999]

Arrived a few days ago

I have yet to try it in boot-mode. Today I made several tests in serial with 5.9 M, which is 5AM and I have to re that ? very stable and reliable. The read and write times are the standard for these units.
I tried both to upload files to 320kb format .bin files from 304kb format .hex and in both cases it works. It is curious that with the files from 304 first perform a read of the boot of the controller (at least cos? writes the SW during this operation), and then write the flash.
One thing I do not ? success: the changing of the date of programmazion of the control unit. I have uploaded the file e2p (where I had modified the code tester), uploaded the file to the flash format 320kb but I only change the code tester... there giocher? still figuring out how to do!!

A few question for those who already? the usa: to put the boot in the wiring kit with free cable I have the cable for the bootstrap. Should I add it myself?
Simply adding a wire from the cable of the negative that connects the metal body of the control unit with an alligator clip to and point to the pitch of the bootstrap?
On the ecu, do you prefer to use as a negative pin 10, 34, or both, or ? indifferent?

M999

I fixed it, just as I suggested :D

I peeled the negative and you ? the treaty of a simple addition of a thread that I have linked to one of the two ends? an alligator clip to that will be? to attach to the metal body of the unit. On the other end? the alligator clip to I connected a second wire with the end? to the point (simple needle of steel), the pitch of the bootstrap.

M999

[rdponline]

Fantastic and I use it almost every day, never tired to read and write, then clone file in hw different generating a unique file for that hw... shelter the 59f and 4af then use it every day... a bit slow, but dependable, in comparison to other interfaces that I used... they gave me only problems...

[crteam]

At present the limits I have found.
It seems to work perfectly for us? that declares the constructor
hello coma works well then this is the cdc?I would be willing znche I take it.but I don't know where to get it...

[m999]

I should have the same that took the user a coma. Also I confirm that it works really well and ? a simplicity? use disarming. We agree the software and error-proof. Tried with all the ecu that declares the constructor and doing various tests on reading, writing, immo, etc., and to this day, has not missed a beat. I would say very good.

You can't give directions to the purchase as required by the regulations, the more so if it is c - - -. Looking good in the network ;)

M999

[gcmotor]

Hello guys some of you I can? send in Pm the link where you have the Clone, I would like to see it. Thank you in advance

[cinqueturbo]

1? The Pm does not exist pi?..
2? it is forbidden to link-are external sites that deal with Chip-tuning
3? and will not discuss, and post HW and SW clones..
4? Re-read the rules

[gcmotor]

Ok okay

[leandro89]

Hello guys some of you I can? send in Pm the link where you have the Clone, I would like to see it. Thank you in advance

as a gi? said by cinqueturbo read the rules and attention to the requests

[munro]

sorry if dusted this discussion but since I would be willing to take the cdc marelli wanted to ask that already? c'? the has how it behaves with the marelli m6jf and m6f3....
if you have had the opportunity to try to read, write everything with these ecu in particular....and for the mj8df?? what do you say??

[rdponline]

The 8df makes them not because they have jtag protocol and the cdc marelli suppprta only the 6jf, but I can't take you experience about it because for the marelli 13 mjet use kess or ktag the cdc use it only for 59f 5af

[munro]

ok thanks...

[crteam]

The 8df makes them not because they have jtag protocol and the cdc marelli suppprta only the 6jf, but I can't take you experience about it because for the marelli 13 mjet use kess or ktag the cdc use it only for 59f 5af

raffaele your c---and?

[Iltulipanonero]

? can you post a screen of the program?
Which version do you have? Just to see which interface I... excuse me, but are the first steps.

[gcmotor]

Arrived a few days ago

I have yet to try it in boot-mode. Today I made several tests in serial with 5.9 M, which is 5AM and I have to re that ? very stable and reliable. The read and write times are the standard for these units.
I tried both to upload files to 320kb format .bin files from 304kb format .hex and in both cases it works. It is curious that with the files from 304 first perform a read of the boot of the controller (at least cos? writes the SW during this operation), and then write the flash.
One thing I do not ? success: the changing of the date of programmazion of the control unit. I have uploaded the file e2p (where I had modified the code tester), uploaded the file to the flash format 320kb but I only change the code tester... there giocher? still figuring out how to do!!

A few question for those who already? the usa: to put the boot in the wiring kit with free cable I have the cable for the bootstrap. Should I add it myself?
Simply adding a wire from the cable of the negative that connects the metal body of the control unit with an alligator clip to and point to the pitch of the bootstrap?
On the ecu, do you prefer to use as a negative pin 10, 34, or both, or ? indifferent?

M999

I fixed it, just as I suggested :D

I peeled the negative and you ? the treaty of a simple addition of a thread that I have linked to one of the two ends? an alligator clip to that will be? to attach to the metal body of the unit. On the other end? the alligator clip to I connected a second wire with the end? to the point (simple needle of steel), the pitch of the bootstrap.

M999

Hi I have bought this interface, in boot mode I have not tried it yet. I tried to read a Marelli ecu, ducati monster in the serial but nothing. It is as if the software does not see it. I wanted to read in boot mode, but the inside does not seem to me like 59f of the fiat punto, to understand, and I can't find the site for your boot

[glittering chiffon party dress.fitted]

I was wondering who uses it if it really is also the m1.5.5.and the 7.3 thanks

[ghironfa]

is immo off about 5am hw610??