Limiter maximum speed EDC 15P VW group

[neo]

Hello all,in these days I have done a VW Sharan 115 hp PD EDC 15P.The car goes very well but not exceed 180-190 km / hour, Someone knows if it is the car has a limiter max speed and if you can change?Thanks .Place the file ori.

[carlo abarth]

there is a program that can move us in offcina and imposed the limit when you want to!!

[neo]

What do you call this program?Six sucuro that works on the 15P?Thanks

[carlo abarth]

death and the only sure thing... if you want tomorrow I go in offcina and I'll pass you the file in the program !!

[Cristiano75]

That type of program ?.... I knew that the edc15p had not set the limitaore speed?..... c'? a map that if it were that indicates how to max speed 251km/h

[neo]

death and the only sure thing... if you want tomorrow I go in offcina and I'll pass you the file in the program !!
Thanks.You and I will be very grateful.

[alex68]

can I have it also I thank you?

[frantik3]

6e72c may be limited to 180, however, the next line put it straight and see if anything changes

[neo]

Hi Frantic3 excuse me but the address indicated by you, I can't find anything

[frantik3]

sorry 7534e

[Cristiano75]

sorry 7534e

I kindly ask since I can not download the file, though ? you can have the numbers hw and sw for the ecu in question cos? at least one can verify as described above with a file in an archive...
Thanks for the courtesy....

[neo]

I kindly ask since I can not download the file, though ? you can have the numbers hw and sw for the ecu in question cos? at least one can verify as described above with a file in an archive...
Thanks for the courtesy....

Bosch
Diesel
0281010216
1037354462

[neo]

6e72c may be limited to 180, however, the next line put it straight and see if anything changes

Take it straight the end of that address?Thanks

[neo]

Take a look if I have understood well.Thanks

[Cristiano75]

I don't think that 6E72c is a limitaore of speed.
I have compared it with a file golf 115hp and the same bit indicates 12000. The machine to do 120km/h?
The golf 130/150hp indicate 20000 as the value... but the 2 cars have speed? different the first 205km/h declared, and the other 215km/h...
Booohh to me it seems not, for? try not to make? bad.. the worst the lose money ORI..
try and let us know...
I knew that in the limit, the limiter speed? it was to this address:
Map 10x5.
Y-axis (10) > 05F84A
The X-axis (5) > 05F860
The map Z (50) >> 05F86C >> 05F8CE?

And for all of the pd have the limiter at 251km/h...

[MisterKappa]

Do you know the address of this value in the edc16u1 ?

[Cristiano75]

Do you know the address of this value in the edc16u1 ?

Send me the map and I see if I can find it...

[frantik3]

Do you know the address of this value in the edc16u1 ?

On some edc16 can be found in the map and also in the eeprom2

[msport (exil77grande)]

on many edc16 and you can move the rev limiter thing that, until today, all of them have always denied with unacerta presumption.

[puntospeed1.3]

if you could have a hint to which curve ?, close to where you are located etc. I am rev-limiter.

[special]

good evening I include myself in the discussion I was wondering if the limiter speed? ? this also edc15v with flash 29f400?

[danny677]

the sharan for reasons aero 180/190 gave almost? everything..
if you want to see speed? further, we need a nice herd that you can only give raising the press turbo after 3500 rpm ( trying to stay around 1200 millibars and no more than compensate the chronic shortage of naphtha in the high zone of the tachometer set from the house. Also the torque limiters in the area of high alzali a 30% at least, and those reset rewrite them pareggiandoli at least to the values that it read at 3000 rpm

Also I confirm that on edc15 used on the vw group, there are no limiter speed? active; for example, on the bmw e46 2.0 d and 3.0 d ? this instead