View The Full Version : vcds
hi guys I have a vcds release 11.11 but I d? an error when I connect it, someone's? what is pu? be?, in the installation cd-rom in addition to the installer file was a text file that I attach ,you know what? thanks to all
3388scusate I had forgotten the image of the error
motorsport
24-03-2013, 21:22
hi,I believe that file is nothing, the drv are ok?? have you checked if you find any conflicts in the device manager??
the drivers are installed correctly in device manager there are no conflicts, don't you ? never connected to the internet why? ? in a virtual machine with xp where I have disabled the network ,the usb test and led that c'? me ok, I tried on the scirocco to my son, and do not enter
motorsport
25-03-2013, 00:52
not or idea, you can ask for info where you bought it,or make a test on another pc!!
ok thanks for motorsport as soon as I have time prover? to install it on a pc with xp, that is not the fact of the virtual system that maybe is not going well.
do you know if you can? enable in any way the license? or someone who has already done it?
You have the operating system to 64bit? maybe not go for this..
Hello sisco,
could you by chance upload the image from qualchaltra part?
Unfortunately, I do not see and do not possible to help.
Cmq. I think that you're stuck in the cable.
That ID from the system for the cable?
When you plug it in you should get out "Ross-Tech", also in the settings.
motorsport
25-03-2013, 14:45
ok thanks for motorsport as soon as I have time prover? to install it on a pc with xp, that is not the fact of the virtual system that maybe is not going well.
do you know if you can? enable in any way the license? or someone who has already done it?
I'm sorry I don't know'....it should enable the same to your provider as a rule!!
sisco, try the program that I am attaching.
What tells you the id of the cable?
3400
for lucagt the program that I have attached are not me, lets download it says that it can? be harmful to the id of the cable I don't know how you see (probably with your program ), to load the image from another part are not practical ,I try to write it qu?
interface status=-2
interface not ready!
possible reasons:
*incorrect com port selected
*interface not plugged in
*ignition not turned on
*k-line stuck
*firmware update needded
for more details,use test on options screen
on the cd that they sent me there was also a text file, copy the qu? the content ||VCDS v11.11 ATMEGA162 Fuses & Lock bits
---------------------------------------
# LOCK: 0b11111100
# bit 7 = -
# bit 6 = -
# bit 5 = BLB12 (1)
# bit 4 = BLB11 (1)
# bit 3 = BLB02 (1)
# bit 2 = BLB01 (1)
# bit 1 = LB2 (0)
# bit 0 = LB1 (0)
# EFUSE: 0b11111001
# bit 7 = -
# bit 6 = -
# bit 5 = -
# bit 4 = M161C (1)
# bit 3 = BODLEVEL2 (1)
# bit 2 = BODLEVEL1 (0)
# bit 1 = BODLEVEL0 (0)
# bit 0 = -
# LFUSE: 0b11111101
# bit 7 = CKDIV8 (1)
# bit 6 = CKOUT (1)
# bits 5..4 = SUT1:0 (11)
# bit 3..0 = CKSEL3:0 (1101)
# HFUSE: 0b11011100
# bit 7 = OCDEN (1)
# bit 6 = JTAGEN (1)
# bit 5 = SPIEN (0)
# bit 4 = WDTON (1)
# bit 3 = EESAVE (1)
# bit 2 = BOOTSZ1 (1)
# bit 1 = BOOTSZ0 (0)
# bit 0 = BOOTRST (0)
I don't know what's the pu? serve this as a text file, the cable ? installed in the virtual xp running on vmware, I forgot the usb test is ok, where c'? written led if I click after a p? says ok in device manager it is seen as a ross-tech, doesn't it ? never connected to the internet, hello if you know a few tips----- thanks
vdcs ? the program comes with the cable vag-com ? works with elm?
I use it safely on seven all ok maybe if you need I send you my hello
vdcs ? the program comes with the cable vag-com ? works with elm?
no vcds only works with the sw
Hello sisco,
have you tried it on some other machine?
Maybe there is some error with the machine on the line k.
I also use VMWare this cable to go to the sure shot that certain programs do not connect via the internet.
hello LucaGT no, I have not yet tried it on another machine ? one thing I have to do, but the time ? the tyrant can I contact you in pm? I would like to ask you some things
Of course.
You can also write here, maybe also interesting for others.
Hello sisco,
I'll answer you here, because the answer is also interesting for other people.
The program that I have attached simply reads the ID of a device connected via USB. Can be the keyboard, the mouse, or the cable vcds.
Anyway, with this ID, you can do nothing, nor generate any license to use it in some other way. And just to verify that it is not FFFF, because this would have reported that the e2p cable would have been formatted .
Gia, your cable pero passes all the tests, and the cable that is broken. I and the USB connection using VMWare or not, and the car is not going well.
Not and in a case and a car of the year 1997-1999?
ok I managed to download usbview we update ? time to go to work hello
Hello sisco,
I'll answer you here, because the answer is also interesting for other people.
The program that I have attached simply reads the ID of a device connected via USB. Can be the keyboard, the mouse, or the cable vcds.
Anyway, with this ID, you can do nothing, nor generate any license to use it in some other way. And just to verify that it is not FFFF, because this would have reported that the e2p cable would have been formatted .
Gia, your cable pero passes all the tests, and the cable that is broken. I and the USB connection using VMWare or not, and the car is not going well.
Not and in a case and a car of the year 1997-1999?
no ? a sirocco tsfi 1400 the end of 2008
as a first try? try it with some other machine and you do? know now I go hello
cawadany
27-03-2013, 09:03
Then from the Test that you do in the options, you from that ? everything ok? You get a screen like this?
http://www.ross-tech*****/vcds/tour/908/options-tests.png
carlo abarth
27-03-2013, 09:10
l power obd ec'... the doors are set well???
Then from the Test that you do in the options, you from that ? everything ok? You get a screen like this?
http://www.ross-tech*****/vcds/tour/908/options-tests.png
will I get a screen like the one
l power obd ec'... the doors are set well???
for the power supply in the obd, there should be no problems why? autocom enters without problems, when I plug in the vcds, the led turns red for a few seconds and then turns off, the gates I left checked the usb, I have not yet tried it on another vehicle due to lack of time, greetings
cawadany
27-03-2013, 14:15
Strange behavior of the led. My when I connect it to the obd, the led turns red and after a moment it turns green.... I would not like that your cable is defective.
Maybe a short circuit on the line K?
I read in another forum once interfaces defetose. Have to resolder the contacts, and everything worked once again.
cawadany
27-03-2013, 16:37
According to me c'? something that does not work when it is connected to the drive and is to be given power. If it was the classic sprogrammazione of the cable, or if there are any problems with the dialogue between the pc and the interface, the test should not be to a good end.
hello guys, thanks to all of you for your help, for the moment, I have not managed to try it on another machine to be able to understand if it is only with the scirocco where I have tried, I bought it just because? my son has that car and I said that you can activate some of the things that I really do not know yet what they are for? I have read a p? around and it seems to me that it is a p? delicate seen that many often speak of reprogramming and that also is not so easy to understand how to operate the changes
Even though it is in German, but here you will find almost everything that you can program the following:
http://www.stemei.de/pages/coding/vw-scirocco-iii.php
ok thanks LucaGT now? I have to try to make it work
hello guys, will update on cable vcds, I tried on a caddy nothing to do will not work but as it says in cawadany after that is plugged into the obd led eccende red and after a p? turns green, even my f? cos? (before I had said that you died, I had not looked good) when? I connected it to the caddy, and I tried to enter the engine has done a few things different from the usual (as if it were trying some communication protocols "? was my impression") after this, it was not a pi? the positive test of the door; and never more did the one of whom I have written before,(the cio? the pove of communication), I realized that even if in the real pc, I disabled the internet in the virtual re-enable it each time you power on, and I am afraid that it is connected; and then perhaps, this is why I now say " interface not found "
question: what can I do now? I throw it away? I know that you can? to reschedule, someone of you has already? done? I begin to contact the seller, if you know something in the way you listen to thanks to all
What do you say usbview?
cioa LucaGT you know that between one thing and another I forgot to try it !!!
As it seems, not been erased from the e2p.
Have you tried to get it working in the real system and not virtual?
Generally, no differences is, but you never know
so if I understand correctly, if the e2p was deleted usb view would not found in the control that is executed , ok prover? in xp real have you ever seen that maybe put you to work, hello
I know e2p would have been deleted, there would not be written to Ross-Tech in USBview
hello to all the guys will update on the cable vcds, I have been a p? busy and I could not have done more? tests, today I installed everything on xp real tried it 10 minutes ago and it works ???? connects to the machine, clear the dtc and there are a lot of items that you need to understand with calm, thank you guys all for your help
However, if you are looking for in the network to find the driver for it on windows 7 64-bit, you don't need to force xp! :)
if you want to try I'll send you my exe vcds 11 let me know hello
if you want to try I'll send you my exe vcds 11 let me know hello
hello alex68 but the exe should always be the same for both xp and 7 no? they should just change the driver, however, if you have the driver for 7 64bit are welcome, if you know that the change in the exe and want to send even that well, what to tell you thanks
hello alex68 but the exe should always be the same for both xp and 7 no? they should just change the driver, however, if you have the driver for 7 64bit are welcome, if you know that the change in the exe and want to send even that well, what to tell you thanks
the driver installs the soft directly in the installation. in case send me your **** opp your skype so I'll pass you all hello
angelus.d87
15-12-2013, 00:43
I'm on xp so I have 2 pc portable
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.