alfa romeo 159 2.0 jtdm

[Vincenzo]

good day, I ask advice on a problem that occurs repeatedly on my 159 170 hp. 30,000 km is turned on the yellow light "check engine" without any reduction in performance. The service imput? the cause of the lambda probe. Replaced this, after 2,000 km of new the same problem and the other replacement of the probe (not the same). another 10,000 km new episode and the service alpha was provided to turn the power off and reset the error. Last week, new ignition.......? the case that intervene radically to eliminate the hassle. I have to say that I alternate?? the city, highway....that I provide to run the engine occasionally runs, high average, etc....certainly, there are episodes that annoy you and make you lose time. I would like a motor pi? ready, then the elimination of the dpf egr and remapping. I live in Abruzzo and, if you would like directions to someone referenced my area (the area of Rome) which is able to intervene. Thanks to those who wanted to answer me.

[giama'a]

I do not understand, but when the light comes on in the diagnosis of errors or dtc are?

[Alfa159 q4]

I have a friend in the leg in Rome pu? provide also the tube for the removal of the dpf.
If you are interested I'll send you the contact in pm.

[Vincenzo]

I could not tell you the alfa argue that it is the lambda. Anyway, I would like to remove the cap and place a p? the provision

[Vincenzo]

I have a friend in the leg in Rome pu? provide also the tube for the removal of the dpf.
If you are interested I'll send you the contact in pm.

I would be grateful

[sportknight]

sorry,you're qu? on the forum..you should not learn how to get the work alone??

[Vincenzo]

sorry,you're qu? on the forum..you should not learn how to get the work alone??

I want to understand the solutions, and then to do the work ? certainly pi? capable of me

[Alfa159 q4]

When you do the job facts release the original file, just a usb stick.
Cos? when you have ir? experience, and an interface with which to read your ecu you will be able to compare the original file with the modified one and studiartelo.

[SandroMarciano]

Stop it, all of you, I have the same car that has had the same problems, fix with an update to the fFiat, if you have...

[alfajtd]

they're all 2?
it would be nice to understand what they cappellato...

[Vincenzo]

When you do the job facts release the original file, just a usb stick.
Cos? when you have ir? experience, and an interface with which to read your ecu you will be able to compare the original file with the modified one and studiartelo.

thanks for the straight

[SandroMarciano]

yes I have them both, now I try and load them, but I have to warn you that we do not understand anything!

[Vincenzo]

I would be grateful. Even if in alpha say that the sw ? up-to-date

[alfajtd]

yes I have them both, now I try and load them, but I have to warn you that we do not understand anything!

thanks a lot...

diaciamo that I have something that I can? help...
;)

[Vincenzo]

Stop it, all of you, I have the same car that has had the same problems, fix with an update to the fFiat, if you have...

I would be grateful even if in alpha say that the sw ? up-to-date

[SandroMarciano]

that's all, the bk ? been done with cmd, I also have a bk with cock if you need to but don't ? 0 the scriptures....

[SandroMarciano]

I would be grateful even if in alpha say that the sw ? up-to-date
controls the number of sw if it is one of two that I posted I!

[giarras]

guys.*****and by regulation, the file ori should be posted in the data bank of the forum, with a description :

WITH THE MAKE / MODEL / CC / CV / HW / SW

then, if necessary report the link.

[alfajtd]

the area maps ? the original... are you sure you have integrated the update?

the area before the maps does not ? possible to know why? read by obd...

[giarras]

that's all, the bk ? been done with cmd, I also have a bk with cock if you need to but don't ? 0 the scriptures....

moved into the database and renamed, I recommend the next time.

https://www.professionalchiptuning.net/showthread.php?59-alfa-159&p=34504#post34504

[msport (exil77grande)]

Eventually in rome we have a co-worker.

[antonio.o]

I have a friend in the leg in Rome pu? provide also the tube for the removal of the dpf.
If you are interested I'll send you the contact in pm.
hello, I am interested in me for my 159 120 HP you can? have the contact in PM.
thanks

[SandroMarciano]

moved into the database and renamed, I recommend the next time.

https://www.professionalchiptuning.net/showthread.php?59-alfa-159&p=34504#post34504
ok, sorry, I posted everything here, why? I looked about, and then the files were pi? ... the next time we star? pi? careful!
the problem ? now I would like to check which files I put, since I am told that there are no differences when I had the views, but the system prevents me... in this way to me ? a bit difficult to help...

[giarras]

ok, sorry, I posted everything here, why? I looked about, and then the files were pi? ... the next time we star? pi? careful!
the problem ? now I would like to check which files I put, since I am told that there are no differences when I had the views, but the system prevents me... in this way to me ? a bit difficult to help...

ok, then I'm deleting those posted,do the necessary checks and placed again in the data bank files the original..I recommend with all the data as done by me..thanks.

[SandroMarciano]

they were already? posted
https://www.professionalchiptuning.net/showthread.php?59-alfa-159&p=150&viewfull=1#post150 if you do not notice differences put my this time I hope correct!!

Precisely that is the update ? was made for a reason errors in the lambda.

[alfajtd]

they were already? posted
https://www.professionalchiptuning.net/showthread.php?59-alfa-159&p=150&viewfull=1#post150 if you do not notice differences put my this time I hope correct!!

Precisely that is the update ? was made for a reason errors in the lambda.

if you have the file posted by msport
alfa 159 2.0mjet 170cv edc16 c39

File Attachments File Attachments

File type: rar alfa_159_2.0mjet_170cv_HW_0281015589_SW_1037501103 .rar (47.2 KB, 15 Views)
File type: rar alfa_159_1.9mjet_170cv_1037504037.rar (47.5 KB, 11 Views)


the 589_103 not ? the original...

for what ? pi? good that you put your original file to try to understand what they have changed to the bosch

[alfajtd]

not being able to modify the message,

I have seen pi? under the 589_103 ? was also posted by uncle web...

I believe the original to the point I'm...

sandro the files in question are those them?
037 old and 103 update?

[Vincenzo]

Eventually in rome we have a co-worker.

thanks msport you can indicarmelo?

[msport (exil77grande)]

thanks msport you can indicarmelo?

contact me in a pm that I'll pass you the contact.

[MoNsTeRDarK]

Hello, my 159 2.0 jtdm 136cv euro5 has the problem of the lambda... appeared already? at 30000km (now I have 45000)

If I do a scan the engine control unit with MULTIECUSCAN I get the following errors:
1: P1131 - the lambda oxygen sensor Signal 1 upstream (plausibilit?)
2: P0130 - Diagnosis electric lambda sensor
Such errors, even if it is erased from the ecu reappeared after a few miles and a couple of times I did turn on the error in the dashboard of the "check engine".

I have read that the Alpha has rolled out a update to fix this problem....below I give you the detail of my ecu... ? the latest version available? or should I go to the Alpha update to resolve the problem?

CONNECTED TO:
Alfa Romeo 159 2.0 JTDm 16V
Bosch EDC16C39 CF5/EOBD Diesel Injection (1.6, 1.9, 2.0)
--------------------------------------------------------------

ISO code: FD 86 E9 08 49
Number drawing FIAT: 51892681
Number Hardware: 0281017783
Hardware Version: 00
Number Software: 1037515032
Software Version: 4241
Number approval: 9394N
Date of planning: 03/31/2011

Thanks

[lightning]

Hi all, I confirm the alfa Romeo pulled out a fix for that kind of errors reported.

[MoNsTeRDarK]

Hi all, I confirm the alfa Romeo pulled out a fix for that kind of errors reported.

Looking at the version of my ecu (which I posted just before) can you tell me if I have already? this update is installed or not?

[lightning]

X monsterdark tomorrow, we can look at and say.

[lightning]

Hello from the data that I have these numbers, the ecu can not find them all change .if the patience tonight I try to scannerizzarti the data.if no go in the dealership alpha and do the test with the examiner

[MoNsTeRDarK]

I prefer to wait for your scannerizzazzione...if I go in the alpha I want to go do x update, otherwise only to attack the machine you want to 25euro! Thanks!

[lightning]

8029

hello I inserted the file I don't know if it is inserted all right.

[MoNsTeRDarK]

if I click in your file I get the following error...

MoNsTeRDarK, you do not have permission to access this page. This pu? be due to one of the following reasons:

Your user account may not have sufficient privileges to access this page. You're trying to change the message to someone else, access administrative features or some other proprietary system?
If you're trying to write a message, the administrator may have disabled your account, or it may be awaiting activation.

[Backgroop]

if I click in your file I get the following error...

MoNsTeRDarK, you do not have permission to access this page. This pu? be due to one of the following reasons:

Your user account may not have sufficient privileges to access this page. You're trying to change the message to someone else, access administrative features or some other proprietary system?
If you're trying to write a message, the administrator may have disabled your account, or it may be awaiting activation.

If you read the rules you will be? pi? clear

[123alexs]

Buy a simple elm327 max 30? diagnosis and do as many as you like!

[lightning]

X 123alexs,but this tool just makes the diagnosis, or is charging for updates?

[MoNsTeRDarK]

I have already? the cable elm327 but you can't see/do updates to the engine control unit....

[123alexs]

159 you can take a mpps v12/13... you see on the store