read eprom 95320 with carprog

[alexracing]

hi I can not read the airbag control unit 500 5wk43908 with eprom 95320 ,tells me to use the adapter cable a4 but I don't know where to connect it,someone can help me thanks.

[legendaryslave]

on the eeprom, smd close to the condenser and the great

[gezame]

Hello
The many faces can not do (style-writing) in the circuit and you need to desoldare the eeprom.

[alexracing]

on the eeprom, smd close to the condenser and the great

l eprom I already read with upa but I don't have the software to restore the file,while carprog can only do that by reading it directly to this I can not restore drivers.

[legendaryslave]

keep taken from my bank data read by a controller working you only have to align the proxi

[alexracing]

if you think this is not a problem can you send me the file on ......................I can still download from the forum, thanks to the availability.

[legendaryslave]

you need to contact the administrators contravverei to the regulation

[alexracing]

the reason for the time being thanks

[msport (exil77grande)]

the reason for the time being thanks

it is already the second your message with the same request you send through ***** file,I invite you to read the rules here we would like you rispetasse.

[alexracing]

are aware of the regulation ,my request was to the title of favor due to the fact that I have problems with the dedicated tool no because I can't forlo.

[spiki_x]

here is the picture of the memory

7963

and a nice break connect this cockroach to the programmer

[legendaryslave]

here is the picture of the memory

7963

and a nice break connect this cockroach to the programmer
there are the special weld-on adapter and I use those

[spiki_x]

You are equipped. :)

I started to reset airbag recently and this is the first such surprise. Up until now, they were all eeprom size "normal", but I soldered on the controller in the style of "the nest of the crow"