Kick not found help

[nico87trip]

Hello all,
I have to perform a read on the alfa 166 2.4 jtd (due to a problem in the ignition, see the discussion on the forums page dedicated ) after you have opened the cd-rom of the software kwp 2000, I launched the program,windows 8 upgrade drivers automatically and the software part in the correct way

Attacking the socket to the plug, the blue light turns on by thinking that the circuit is correctly fed continuing with the connect the device to the pc, turn on the other three lights.

I open the interface I select the model of the control unit Alpha\Bosh etc ec

dll found 44 I press on lunch and the writing appears to "kick not faund"
According to you ? my ecu you ? burned or some error on the kwp 2000?
Thank you all in advance.

[giarras]

I think it is only a problem of driver kwp2000 I do not think that it can turn with wind8 check in device manager and see if the drivers are in place.

[nico87trip]

thanks domaniprovo with another pc but ? it makes me install but open it as an executable directly?

[giarras]

check and see that the problem ? in the drivers.

[nico87trip]

check and see that the problem ? in the drivers.

Hello
Then trying the operation with a dated operating system the first version of xp the procedure ? was different now recognizes all the drivers and the device works perfectly when I launch the dll the interface opens, only the screen DATA and trying both low speed? that high l the outcome of the reading ? always the same "ecu not found" if my problem comes from the block of the immobiletor ? can that blocks the ecu even read , c? do you think some intervention by the ****llo ardwer or mechanical to do before the reading?
Thanks in advance to all

[voglioimparare]

if you do not find even the hardware id, I think you selected the wrong driver, with the kwp-2000, 166 2,4-without problems...

[nico87trip]

The problem ? that the system works and the drivers are the ones for xp and now try to download them new but I don't think will solve the problem I think is in the procedure that I gave you that ? the first time I use it!!!c'? any fuse to remove or midifica? I have to disconnect the ecu alarms before logging in?

[felix]

only on xp or 98

[minijuri]

he did this to me, why? I had a driver conflict , I removed everything and riinstallato everything works fine now

[giuseppe1374]

have you tried to read the ecu on the bench? you don't have a cock to old?

[net_proo]

hello,
I have a same error with windows xp ...

[hftdelta]

I had problems also I'm on win 7 by installing the drivers manually I solved it. Test so the drivers download them from the internet

[corland]

I have a kwp2000 diy... but I think that the problem was the same. if you do not use the drivers provided with the device, when win update them often, you will not see more? why? even if, for the same integrated are different. In fact, the ones provided are variants to make the control possible.. So I personally recommend not to start the recognition of car drivers, but to take it directly from the source folder or installation