View The Full Version : First steps with ecm titanium
magi1984
16-07-2012, 23:02
advice on how to map or on how to use the program?
they are still in their infancy and the first map I intend to learn the most? possible, to use ? fairly intuitive, although I have to admit that st? going to trial, you exactly is your problem do you have?
magi1984
16-07-2012, 23:37
yes,now I'm going to sleep,however if you have any question flaw as well,if I know the answer tomorrow as soon as I connect tell you!
ok thank you for the availability, tomorrow
meccano85
17-07-2012, 08:24
therefore, the recommended program?
magi1984
17-07-2012, 08:31
I'm well, c'? to say that I am at the beginning and for the time being ? the only program that I know (so my opinion counts for relatively little)
meccano85
17-07-2012, 10:58
I have always used ecm2001....
magi1984
17-07-2012, 11:02
b? what ? sure, the titanium ? best of 2001
in fact ? the best but also the ecm 2001 for the first experience ? evil you with what interface to use?
magi1984
17-07-2012, 17:41
I with kess v2 original
but at the end of the interface ? relative, serves only to read and write, does not count with the sw
for? I believe that a good interface is a guarantee ;-) and using a powergate m o r what do you say?
magi1984
17-07-2012, 19:01
unfortunately, I do not know, I'm sorry.
what I meant to say I ? that a good interface ? a guarantee for the success of the occurred writing the file, and on this I agree the count, but not center with the processing of the file.
the cio? if a file ? done wrong, you can write it with the best interface in the world, but the sar file? still hurt once loaded on the car
you exact what is not up for discussion, my concern was a possible block in the writing, beautiful grain I have 2 powergate and they work very well if you want I'll explain their operation are really easy to use and if we are successful I am, to say the least novice it can? to be able anyone hehehe :)
saivivere
19-07-2012, 13:05
I would be interested too in the functioning of the powergate. I, however, have I written more? times with other instruments, and not you ? never stuck anything in writing...for luck!!:)
I will explain briefly, the powergate ? a sort of standalone interface. it feeds directly from the obd2, you can read the original file, load it on a pc with a aposito program and modify it through the ecm, once edited, the file is re-inserted into the powergate and loaded in the centralna works really well and +? also fast
msport (exil77grande)
19-07-2012, 14:11
also this article in the m version will be placed in the forum.
saivivere
19-07-2012, 15:01
I will explain briefly, the powergate ? a sort of standalone interface. it feeds directly from the obd2, you can read the original file, load it on a pc with a aposito program and modify it through the ecm, once edited, the file is re-inserted into the powergate and loaded in the centralna works really well and +? also fast
Thank you for the explanation and for the quickness?. Then has its own internal memory where you can store pi? files without using a pc. Great tool! ;)
Thank you for the explanation and for the quickness?. Then has its own internal memory where you can store pi? files without using a pc. Great tool! ;)
exactly, can? contain up to 3 files, the original + 2 modified, I also have the previous version to the 6 buttons that unfortunately you can't? pi? reset but the second version ? a different story ? fast, intuitive and easy to use ;-) think that in order to write the modified file on fiesta 1.4 tdci puts us less than 3 minutes, the old man there put 10
also this article in the m version will be placed in the forum.
very good admin, pi? or not it s? when will come? open the sales section? the hell are impatient to the max hehehe
very good admin, pi? or not it s? when will come? open the sales section? the hell are impatient to the max hehehe
within 2 days we open the section.
excellent!!! holy cow!! I can't wait, an anticipation on the products you can give it to? clones or the original?
magi1984
19-07-2012, 19:03
I would say that we are off topic :D ;)
saivivere
21-07-2012, 23:14
within 2 days we open the section.
Well I look forward to!! ;)
msport (exil77grande)
22-07-2012, 08:42
Well I look forward to!! ;)
is already open now slowly insert a couple of products.
guys I know that I will fill with insults hehehe but I have a problem with the ecm, when I modify the original map and save everything is ok but when I go to resume to compare it with the original tells me that the size of the 2 files are different, and I recommend the riallinemaneto once you have done tells me that the calculation of the cecksum not ? correct, where am I wrong?
magi1984
31-07-2012, 20:32
sorry what are the sizes of the two files, the original and modified?
Should be 2 mega if your car ? a edc16c35
the original 1mega the modified 32bite
saivivere
31-07-2012, 23:30
32 bytes? perhaps 32kb I don't understand how this is possible, but what kind of ecu are you talking about?
ECM titanium which version?
? the 1.61 definitely am I wrong something
If you have the v1.49.... you're careful, that has a lot of bugs, I suggest you use it only to see the addresses of the maps
instead, the v1.61..... and ok work well, also the cecksum
? the 1.61 for windows 7, you know what can be the error? I tried to compare other maps not made by me and I see every increase but when I edit I ilo the original file, and save me from these problems
Sorry, but I had not read above
Then loads the file ori I change then go over the top to the left, where the ec says file clikki and click save eprom changed have you done so?
you exact your cos?, the save in the folder increases
Which folder increments?
I told you above in the top left of the ec-written file clikkaci on it and it opens a screen where the ec written save eprom changed there clickki and do the export file, it opens another schermatae save it where you want
me 2 entries
save map data
save the map increases
Then you're wrong now I understand that when you make a change in the grid and then to confirm it, you have to close the screen and confirm the changes that you have made this brings you back
at the first screen (the one where you load the file ori and mod) and from there follow the procedure that I described above
from tell me that you understand tomorrow I have to wake up early haha
ok maybe there are, when it tells me to save me from 3 items
copy the increases on similar maps
overwrite the similar maps
do not change the similar maps
which one do I choose?
This depends on what you're editing wound similar maps are different then and check for now, I want to know how to do to save the work you have done
then click " yes " and copy the increases on similar maps and then follow what I have said before
ok done now, I see the boxes on the right that I have modified that are marked, now I have to try to reload the original map and then just changed to see the gains
To view them you can clikkarci above the graphic that you want to type torque limiters, etc to save your work, instead you have to click file and save eprom changed
miii you're making me sweat
hehehe admin know that I am a ciofeca, when I save the work tells me to register the modified file in the database to the registry?
click no to you after you say you want to export it and save it where you want
admin won't believe it but cel, I made it hehehe thanks for the patience :cool: you're a great
Ok good night see you tomorrow
thanks again tomorrow, now I try to do something, and we see
what do you think, we make a nice video and post? no man has ever dared to do so in the Italian forums, time f? only on the version ecm2001 videos made in south america in the Spanish language.
I'm sure that would be helpful for the zucconi like me hehehe now ? all very pi? clearly, this ? a forum is true! even the novice who do not have the basics like me can learn, if there was the possibility? to take courses for a fee managed by the directors, I would be the first to benefit from it
msport (exil77grande)
01-08-2012, 09:24
what do you think, we make a nice video and post? no man has ever dared to do so in the Italian forums, time f? only on the version ecm2001 videos made in south america in the Spanish language.
honestly, not apple would do this job, and I'll explain why,first of all, this video course would be in the hands of all in a short time and this would give me a lot of hassle because then start' controversy to decrease the experience of those who did,also I don't think is correct in the respect of people like me who does it for a living, and has paid and continues to pay the fine of thousand € per year between subscriptions and courses with this don't get me wrong I am here with the greatest availability to help you but to the extent possible,I think already in this forum are doing a great job and we don't try to speculate on anyone or, even better, we try to help to resolve the problem and not to make you go more back costringentovi to contact our online service or other professionals of the field as they do on many other forums,2 examples are the problem that is having the user know how to live on the golf v, which is limited, and the map that he smoked, and he was going a little of the user magi1984 of the bmw 1 series, that, after several recommendations,address is good now without smoking.
msport (exil77grande)
01-08-2012, 09:28
I'm sure that would be helpful for the zucconi like me hehehe now ? all very pi? clearly, this ? a forum is true! even the novice who do not have the basics like me can learn, if there was the possibility? to take courses for a fee managed by the directors, I would be the first to benefit from it
I and the admin we have decided to include this service, but we've not yet done because there are several things to discuss,is also a serious course where they are taught seriously to remap to 0 and at the end of the course to know how to remap really a file you know how much it should cost?
I years ago I did of the basic courses that I am well paid, and I honestly do not have given me great results,and then say the course is easy,to say the coast tot and easy but at the end you see the final result.
honestly, not apple would do this job, and I'll explain why,first of all, this video course would be in the hands of all in a short time and this would give me a lot of hassle because then start' controversy to decrease the experience of those who did,also I don't think is correct in the respect of people like me who does it for a living, and has paid and continues to pay the fine of thousand € per year between subscriptions and courses with this don't get me wrong I am here with the greatest availability to help you but to the extent possible,I think already in this forum are doing a great job and we don't try to speculate on anyone or, even better, we try to help to resolve the problem and not to make you go more back costringentovi to contact our online service or other professionals of the field as they do on many other forums,2 examples are the problem that is having the user know how to live on the golf v, which is limited, and the map that he smoked, and he was going a little of the user magi1984 of the bmw 1 series, that, after several recommendations,address is good now without smoking.
you're absolutely right, but my proposal was only to show, seen that some users have found of difficulties, not the ways and criteria of the changes to the files, but the various commands of the management of the program.
I and the admin we have decided to include this service, but we've not yet done because there are several things to discuss,is also a serious course where they are taught seriously to remap to 0 and at the end of the course to know how to remap really a file you know how much it should cost?
I years ago I did of the basic courses that I am well paid, and I honestly do not have given me great results,and then say the course is easy,to say the coast tot and easy but at the end you see the final result.
msport (exil77grande)
01-08-2012, 14:05
you're absolutely right, but my proposal was only to show, seen that some users have found of difficulties, not the ways and criteria of the changes to the files, but the various commands of the management of the program.
well in this case gladly help anyone in need, as did the admin with garret just more, but in a direct way.
msport (exil77grande)
01-08-2012, 14:15
you're wrong is not a boredom to help those who know less, and is just a hassle to repeat always the same things, but we are also here to this quiet.
admin I can only say thank you and learn trying not to varvi repeat the same things hehehe or at least try ;)
magi1984
01-08-2012, 16:03
I put the notes taken in the course, surely not ? very but ? however, a beginning
guys I'm studying a map that me ? was done by a professional to see what and how they were touched certain values, I tried to make some changes, especially to low why? before 2000 rpm c'? a hole very marked vanishes once it reaches 2000 rpm, every increase started from 1500 rpm, bringing it in proportion to 1300 rpm based on the reported values, and calculating the proper increase in the grid, I would like to avoid to post it why? doesn't seem fair in your comparisons, I can say that only affects the fuel injection system, why? the turbo ? management pneumatic with manual adjustment of the wastegate, which I did by increasing the pressure of 0.2 bar and checking everything with a pressure gauge in the car ? euro 3 then no fap\dpf
magi1984
01-08-2012, 16:45
I will tell you one thing from personal experience on my car.
I had started to map the injection prior to 1000rpm and then 1500 and yet the car I smoke.
now that I have started from 1700rpm do not smoke more?
then not on all cars ? can increase gi? from low revs without having negative effects (fumosit? at the exhaust)
however, the eye! there are some titanium that are wrong with the checksum
I with ecm 2001 never had any problems.
tried one of titanium, and the control unit blocked
That is not good and the 1.49 .....1.61% to 90%, and ok
I have to try to pull of the sums
mavaila1972
15-08-2012, 20:04
That is not good and the 1.49 .....1.61% to 90%, and ok
true I also tried a file and all is ok only question I have left on me9
hi guys sorry if I'm intruding, but I wanted to confirm to myself that with the titanium 1.49 I locked my ecu, what with ecm2001 never happened to me before and I couldn't explain why, knowing that the cheksam I drove my cock in writing, now I find that it is a problem of titanium. Then why the cock shall not he correct??????? now I have version 1.61 for windows 7 but I have the fear to use it, I had to call a trainer in the area that I have unlocked in the bdm and pay the fine denari. as ever the cable I have calculated the cheksam????
you needle, I ecm I use it and fi?works very well, ? version 1.61 full for? for read and write use the powergate, until now no problem
you should always have a backup bdm, before taking action to make experiments
mavaila1972
17-08-2012, 19:03
I do not trust the version crakkate ecm titanium 1.61 I use it only to study the maps
honestly you need to test carefully before you draw any conclusions.
ec people with ecm 1.61 you are finding good.
sa80libero
18-08-2012, 12:12
to me, it makes me mess with the similar maps....
x curiosity! you copied ecm titanium from a friend and works for you?
always x curiosity? how did you get it to work in your pc?
thanks.
has done everything for him ? a computer expert and to tell you the truth? I don't know how he did it, it gave me back the key that I had given with the program, ready for installation
has done everything for him ? a computer expert and to tell you the truth? I don't know how he did it, it gave me back the key that I had given with the program, ready for installation
thanks x the answer ? as I imagined, then I will explain to you your not ? the original ? as they say taroccato the speech ? who has taroccato version 1.61 has done exactly what he did to your friend, there are different versions, and believe me some are of the buffaloes other behave like the original.
in fact I knew that it was a copy but I myself tried to make a few small changes to some maps and then upload them via powergate and until now no problem, he guaranteed me it works exactly as its the only inconvenience for the drivers that are missing from the database, and the request to have them but he for example, if li is the only or at least the cos? I said
in fact I knew that it was a copy but I myself tried to make a few small changes to some maps and then upload them via powergate and until now no problem, he guaranteed me it works exactly as its the only inconvenience for the drivers that are missing from the database, and the request to have them but he for example, if li is the only or at least the cos? I said
I can confirm that there is a working version with 18500 about driver thinks that up to date to today it has less than 19000.
you with ecm2001 drivers ? play with titanium, I've never tried
my version has 18475, he has about 20000 fuck her hehehe :) I call it the mad scientist
no I downloaded from a free site and there was also a kind of activation key-
I have the 1.61 but I don't seem to go very well... crashes constantly, and some drivers are not loading, you with which operating system do you use?
magi1984
03-09-2012, 16:02
win7 32 and 64bit, no problem
I still use XP, maybe it is what troubles
I use win7 64bit and it goes to the great
And I know that the' own the problem then... but crashes every now and then? type in to search for the driver?
no me, no crashes ever, and ? also fast, how many drivers you have?
18349, and it is quite slow despite the pc is quite big
my version has 18475 driver, your second me ? a clone is not very reliable ? version 1.61 full?
Test as soon as you open the titanium to select the language, in this case, Italian and clikki ok
after try to use it and see how it behaves
good day guys I can't really understand how I view with titanium turbine pressure in bar as 2001 how do I someone can help me? thanks
good day to all and have a good Sunday, I wanted to ask you this question, why with titanium does not allow me to map with maximum torque of the first gear up to the sixth? the ecu in question and' edc16c39 thanks.
msport (exil77grande)
25-11-2012, 17:02
what you say is not possible, I know that you are making confusion ,better explained and post some screen for a better understanding.
what I have to direquando I go on the map, not me to work with maximum torque of from 1 to 6. you place an ecu mod that I have done can you give me a look? thanks
sportknight
18-12-2012, 22:22
I have yet to try the titanium,I hope that it will be painless the transition between 2001 and titanium...
alberto.bf
29-01-2013, 16:42
You can confirm the 2001 ? good.... but the titanium ? a bomb.... I hope that pia plan gives me more sodisfazioni of the ecm 2001...
I would like to download the manual to understand mejo where to touch ?
antonio.o
30-01-2013, 00:49
sorry I can abuse you for your patience and let me know very well how to give the increases in 2D with titanium or a better understanding of the percentage data with respect to the ori.??
Thanks.
pabloescobar
30-01-2013, 10:20
I have the ecm titanium and for what I do I'm quite happy you can? improve with the driver maker that gives you the possibility? to make the driver personal. As for the interface use the kess master
michele30
08-02-2013, 18:40
I have titanium 1.61 ? the last version, or c'? one more up-to-date?
msport (exil77grande)
08-02-2013, 22:06
I have titanium 1.61 ? the last version, or c'? one more up-to-date?
the original version has passed the 1.61 by quite a bit
antonio.o
08-02-2013, 22:27
the original version has passed the 1.61 by quite a bit
sorry but this is not?
msport (exil77grande)
08-02-2013, 22:56
certain that you find just contacts www.alientech.to
antonio.o
08-02-2013, 23:15
certain that you find just contacts www.alientech.to
well it certainly has to do with.
guys, does anyone ? expert in recognizing the 2d map?
guys, does anyone ? expert in recognizing the 2d map?
You can use any map example this driver
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.