read edc 17 dde bmw 120d

[simone82]

good evening,does anyone know by chance tell me if this type of ecu ? gi? been bed with new galletto clone?

[msport (exil77grande)]

you have chosen a good unit to test the new toy ,however I have not yet had customers that have tested on edc17 but even if it was, unfortunately, as already mentioned, it is sti galli are not all the same so where one fails, the other works and vice versa.

[simone82]

eh s? in fact, I have the choice now a fairly simple true,such as how to complicate your life

[polini]

well just the cock for a edc17 not ? ideal.... pretty risky

[msport (exil77grande)]

well just the cock for a edc17 not ? ideal.... pretty risky


of course, we talk about the v2.

[simone82]

can today with the gallo2 edc 17 cp02

[saivivere]

Then it works well this rooster v2!!! Well hopefully I look forward to the sale on the forum!!!:)

[simone82]

well,I have also read siemens ford and lancia ypsilon 90hp mj

[davidehfnos]

but with the clone or the official???

[simone82]

galletto v2 clone

[mavaila1972]

Eye am the delicate Edc17 I don't I could write with a programmer is not the official

[dolphin]

to purchase I would be interested, but I would like to have the certainty that refer to the spansion in the bdm.

[dolphin]

where did you bought the interface, how much it costs.

[filippin87]

Read edc17 cp02 bmw is the boot that obd and edc17 cp45 in the boot with the rooster clone v2 Italian version ok.

[freddyecu]

For galletto v2 you intend to galetto2?the ioc? the latest version?

[giarras]

Read edc17 cp02 bmw is the boot that obd and edc17 cp45 in the boot with the rooster clone v2 Italian version ok.

the Italian version? but produced by who?

[filippin87]

You cock the latest version v48 purchased on ebay.

[msport (exil77grande)]

You cock the latest version v48 purchased on ebay.

well bought on ebay does not mean the product in italy,however, we speak almost certainly a clone product in china.

[filippin87]

well bought on ebay does not mean the product in italy,however, we speak almost certainly a clone product in china.

? can for? at the moment it works, and anyway I just wanted to share my experiences.

[dolphin]

? can for? at the moment it works, and anyway I just wanted to share my experiences.

if someone did happen to read a marelli spansion with this interface, you would do what is pleasing in the share.:or

[dolphin]

I along with a friend to write a muse 90 hp ? was read with the magpro 4.2 files from 2,048 Kb that with mpps 5 files 448 kb rewriting with either interface returns the following error files encrypted and, therefore, does writes.
Am looking forward to any advice, thanks.

[msport (exil77grande)]

hello then, for the first, I ask you I'll open up a specific post, because here it does not make sense,then I want you to understand one thing have you tried to read with mpps and the same file always with mpps try to write it down and tells you the files encrypted,same thing with magpro read and written with the same programmer right? then I wanted to ask you what did you do to the file? you mod you or sent it to someone? if you mod you with what?
I would post a sample file that is read and modified file ready to write and try to understand something more.

[pasquale78]

I along with a friend to write a muse 90 hp ? was read with the magpro 4.2 files from 2,048 Kb that with mpps 5 files 448 kb rewriting with either interface returns the following error files encrypted and, therefore, does writes.
Am looking forward to any advice, thanks.

the file read with mpps nn ? good. version 5 nn law the muse, the version 12.
the flaw with the magpro, try to restart the pc before write down or to install new software (sw) of the mag.
PS calculate the checksum. the mag reports autocorrect but second I nn.

[dolphin]

I apologize for posting in the wrong section, I just can open? a specific post enclosing all if the friend who I'm helping it ? okay, since the work does not ? my all (consider also the files moddato ? was made by the third person), and that for the same also I have different opinions on some things.

Thank you msport for the quick response.

Thank you pasquale78 for the advice.

[fabioefra44]

Actually the question of the EDC17,the problem may not be in the reading the accounts you make in your writing,in fact, with some clones may have at the end of the write error, and the "control calculation processor"whole areas checksum for the clone to the difference of the tools official,fails to correct perfectly. It's always worthwhile equipment official,at least not have the BDM backup.

[msport (exil77grande)]

sincerely on what you have written no I agree,that if something happens in the calculation of the ck, the only problem will be that the machine at the end of the scripture is not a part, but putting the file ori part,however, according to me, a flaw of the clones would be because being copied is not in a perfect way as components, etc can more easily block the scriptures here.

[fabioefra44]

sincerely on what you have written no I agree,that if something happens in the calculation of the ck, the only problem will be that the machine at the end of the scripture is not a part, but putting the file ori part,however, according to me, a flaw of the clones would be because being copied is not in a perfect way as components, etc can more easily block the scriptures here.

I tried it with a clone, and the problem was that;rewritten with my x17 business and no problem. Read the map written by my friend with the clone tool and the problem,once you open it in 2d was right in the checksum

[fabioefra44]

And in any case it takes courage to write a edc17 (see audi or bmw) with a clone. Blocks the Ecu and then what you say to the owner???????

[msport (exil77grande)]

the fact that it takes courage with a clone to write a edc17 I agree with you,but excuse with that clone, and that the machine has written your friend who had a edc17?

[filippin87]

I have read and written edc17 and med17 with the galletto clone, and at the time no problem.

[dolphin]

for filippin87 you like to make a few photos to your interface and post it on the site, possibly on the inside. Hello to soon
N. B. where you got that price?:)

[filippin87]

I answered on the section of the rooster I bought it on ebay price 999euro not a little.

[msport (exil77grande)]

I answered on the section of the rooster I bought it on ebay price 999euro not a little.

How are you? Can you list what you've tested both the obd that bdm?
Then I'll tell you why

[filippin87]

At the moment I'm very happy I did edc17cp02 obd and boot,edc17c41 boot,med17.2 obd and boot,mevd17.2.2 boot,edc16c35 bdm,edc16c31 obd.no problem, or almost the only thing that I rillevato ? it will not let me read the map from the ecu and put it in another, but I don't know if is a problem with galletto clone, or even the wing nut original.

[dolphin]

might and I repeat might be that your interface is not fully unlocked, have you ever tried to start the Software without the interface connected? If you start then the problem is in the sw. Can you post some pictures cos? that all of us that we still have to buy it you make a p? of experience in at least the visual interface. Thanks to early
:)

[msport (exil77grande)]

but I think that it is as you say.

[filippin87]

The software does not start without interface

[pinucc]

can today with the gallo2 edc 17 cp02

I would like to know because to me with the cock, not me, the law gives me error... I know how to help?

[ugoboss]

I would like to know because to me with the cock, not me, the law gives me error... I know how to help?

with which version of a rooster, the you are trying to read.

[sportknight]

give us some info...

anyway, the gauls clone to be a bomb on edc17.... I have made a dozen!!

[pinucc]

galleto 2 clone attack on the obd and I should be in error, what can? be?

[giuseppe1374]

id makes you? have you also tried the boot mode?

[pinucc]

I by mistake already? when I click on data from the ecu... it seems sooo strange..

I must be in error when I click on data from the ecu..

I gi? presented time ago..

[ugoboss]

I by mistake already? when I click on data from the ecu... it seems sooo strange..

I must be in error when I click on data from the ecu..

I gi? presented time ago..

you have selected the correct drive? have you tried on the other car if it works well?

[sportknight]

or you have done something wrong or your cock nno va..

[ugoboss]

if I were you, the smonterei and I would do in boot-mode.

[sportknight]

in it,you were trying to read it in the serial??

forget it,go to boot mode...

[ugoboss]

in it,you were trying to read it in the serial??

forget it,go to boot mode...

in fact, I understand now reading the old posts, for what I've recommended the boot, fast and effective.

[sportknight]

every time someone is madness to try them in serial or O.

I prefer to take the risk of breaking them by opening them and not risk fotterle writing in the serial..

[pinucc]

write in the serial ? risky? I prefer a serial port so that I can rewrite it with more comfort and more? tests...

[leandro89]

write in the serial ? risky? I prefer a serial port so that I can rewrite it with more comfort and more? tests...

block a bmw you know what it means? with hw and sw the same, the files do not coincide and therefore harms the edge

[ugoboss]

write in the serial ? risky? I prefer a serial port so that I can rewrite it with more comfort and more? tests...

if you block it which is convenient.