EGR Fiat Bravo 1600 MJT

[antonio.o]

Hi a friend has this machine has asked me to chiudergli The EGR I can do to read and write in the serial with this FGTECH GALLETTO 2 MASTER how soft it goes good time/ecusafe or another in the manual are not very good if someone is so kind that then help me.
Thanks.

[ecuboost]

with the cock you can read and write, with ecusafe, you can't make it, and with time I think of it, we should be able also carsoftware if I'm not mistaken

[magi1984]

not ? u a good idea chiudee the egr and keep the dpf active.
my advice ? to delete them both

[antonio.o]

ok I can electronically close both but for the mechanical part and FAP are not equipped so it takes a mechanic say? to the friend and then let's see how you rule.
thanks hello.

[antonio.o]

someone can? help me with the addresses so that if you decide to get the mechanical part I could get him to rest so I started as well to fiddle around a little.

[ecuboost]

X the egr there is a guide on the forum, and x the fap should be good to go ecusafe and perhaps there retouching,the egr, you also co time and carsoft

[antonio.o]

X the egr there is a guide on the forum, and x the fap should be good to go ecusafe and perhaps there retouching,the egr, you also co time and carsoft

ok well I had heard or read somewhere of the touch-up of a few bits for the fap done with ecusafe mica you can? to know, more specifically.
Thanks.

[Backgroop]

The test with the time, quietly, I personally I have done 2 without any problems.. ;)

[antonio.o]

X the egr there is a guide on the forum, and x the fap should be good to go ecusafe and perhaps there retouching,the egr, you also co time and carsoft
sorry, but specifically what ? the guide.??
Thanks.

[munro]

https://www.professionalchiptuning.net/showthread.php?29-esempi-di-eliminazione-valvola-egr-gruppo-bosch-edc16

[munro]

then there would be also this:https://www.professionalchiptuning.net/showthread.the php?1234-guide-to-reporting-manually-lintasamento-fap-in-diagnosis-da1000-a-0-on-edc16c39
good job...

[antonio.o]

3023
https://www.professionalchiptuning.net/showthread.php?29-esempi-di-eliminazione-valvola-egr-gruppo-bosch-edc16
thanks I feel the work I did with carsoftware, and after I made a diagnosis but according to the more experienced ? everything in the standard.?

[munro]

I don't know..waiting for confirmation from more experienced....

[audi sp]

I'm sorry.. but that ecu...?? edc16 Bosch ?? marelli ??
give me more? info and put the tsi data, otherwise how we can help you!

[antonio.o]

I'm sorry.. but that ecu...?? edc16 Bosch ?? marelli ??
give me more? info and put the tsi data, otherwise how we can help you!
should they BOSCH EDC16C39.

[giarras]

alcolta the council of magi,if nn sfappi nn ? we recommend that you close the egr,if you have already? indicated where to find the procedure.

[motorsport]

3023
thanks I feel the work I did with carsoftware, and after I made a diagnosis but according to the more experienced ? everything in the standard.?

anyway if places ori and mod and better!!

[msport (exil77grande)]

3023
thanks I feel the work I did with carsoftware, and after I made a diagnosis but according to the more experienced ? everything in the standard.?

I see the opening egr valve 128% when in theory it should be fixed at 4% max then something is wrong.

[antonio.o]

anyway if places ori and mod and better!!
hello, here they are in the annex.

[motorsport]

I confirm and closed the egr from the map!!

[antonio.o]

ok not that bad is the multiecuscan not all, adjust to give the numbers.?
thanks.

[motorsport]

the value should not be the one you should try it with another diagnosis to make a comparison!

[antonio.o]

the value should not be the one you should try it with another diagnosis to make a comparison!
you're right for? unfortunately not the face of the craft then ? gi? so much so that I keep this machine, however, v? fine no lights at the time or defects/strange noises if ever in the week if I see him again I again the diagnosis.