Info Grande Punto 1.2 8v IAW 5SF3M2

[Gianpy80]

Guys do I need to update the map on the large point in the object as the one on it now has problems handling the cold starts. I tried to read with MPPS but I enable only the key writing and ecu id. Open it to get her in the BDM seems impossible, why? full of black mastic. Before you eviscerate someone has already? experiences on this ECU?
Also someone has a gold working? these are the codes for HW and SW:
HW 51704957
SW 00161147

[Gianpy80]

no one? :(

[pdtechnology]

hello gianpy 80 these ecu read in bootmode you have to open it, I know some of the original programmer that can do it but I don't know what exactly I have the problem you complained you can go to fiat and with a software update to solve the problem and avoid disassemble and open.....

[Gianpy80]

Ok, perfect... thanks a lot ;)

[michele30]

what does it mean to read it in bootmode?
bdm?

[munro]

are methods for reading and writing data to the ecu with this removed it from under the car...
the reading-writing in bootmode is to connect,via a special interface cable from this to the pin of the ecu to practice and read and write the content...
the read-write bdm, instead, consists in physically open the ecu and do the same procedure as above but using another interface,directly on the printed circuit board of the ecu in the areas of the same created by the costtruttore of the latter...

[munro]

https://www.professionalchiptuning.net/forumdisplay.php?154-Negozio-Online

[voglioimparare]

hello with instrumentation official alientech just plug in the obd kess and do the hw id. once that is done automatically recognizes hw version and sw of the ecu and gives me the original file;) but I think the only alien this thing..

hello

[tonyteam]

but I do it with the mpps v5 ...

[zaga1]

but I do it with the mpps v5 ...

Hello tonytuner I ? happened to make the map on a grande punto 1.2 65 bhp 8v evo I read the file with fgtech galletto v2 ? I ? popped up a file from 576 kb the cut 448 kb to open it with ecm titanium, then the amended and practically now I don't know how to bring it back to 576 kb to be able to write you know how to do it since I have tried to search and ask on the forum and no one has answered me if you could you help me I would be very grateful

[tt225]

I do not see the file and I hope there are no issues with the checksum, you can do it with a hexadecimal editor and paste the missing part to bring it back to 576 kb
if you use ecm, you must first create a file 128kb and then add it to 448 kb

[zaga1]

I do not see the file and I hope there are no issues with the checksum, you can do it with a hexadecimal editor and paste the missing part to bring it back to 576 kb
if you use ecm, you must first create a file 128kb and then add it to 448 kb

Many thanks for the reply the problem and that I do not know the specific process to cut and riallungarlo or recognize it to ecm it is made using winhex defining the block as the beginning 01fff while with regard to the stretching I do not understand what address to give you kindly aoutarmi dicendoni on how to do this in order to avoid blocking of the ecu thanks a lot for the help

[zaga1]

I do not see the file and I hope there are no issues with the checksum, you can do it with a hexadecimal editor and paste the missing part to bring it back to 576 kb
if you use ecm, you must first create a file 128kb and then add it to 448 kb


Here is the file ori

[msport (exil77grande)]

Hello tonytuner I ? happened to make the map on a grande punto 1.2 65 bhp 8v evo I read the file with fgtech galletto v2 ? I ? popped up a file from 576 kb the cut 448 kb to open it with ecm titanium, then the amended and practically now I don't know how to bring it back to 576 kb to be able to write you know how to do it since I have tried to search and ask on the forum and no one has answered me if you could you help me I would be very grateful


the user is called tonyteam and not tonytuner also as you can see, it was banned.

[zaga1]

the user is called tonyteam and not tonytuner also as you can see, it was banned.

I understood anyway msport could you help me about my problem????

[tt225]

With Winhex, you have to copy the first part of the file from 0 to 01FFF and paste it at the beginning of the file to be 448kb from previously created

[zaga1]

With Winhex, you have to copy the first part of the file from 0 to 01FFF and paste it at the beginning of the file to be 448kb from previously created

Hello tt225 listen have you seen the post made by me again? I first created a file to 128 kb, and then another from 448 kb and modified then I pasted the file from 128 to 448 kb winhex and me ? popped up a file from 576 kb now according to you I can write safely? Graxie for the help

[tt225]

The procedure ? correct , for? I don't see the file

[zaga1]

The procedure ? correct , for? I don't see the file

If you go to see in the new post I see now is cn phone for? just coming to the home the place.but have you ever made these ecu?