Limiter 80e21

[blackwolf76]

I have a eurocargo tector 80e21 2004 and as everyone has the limiter 90 km/h. Can you tell me the way to remove the limiter, or at least raise it a bit???

[munro]

try posting the map to see if you can? do something....
although I believe that the lim is in the e2p.....

[blackwolf76]

tomorrow, the drain and the place, even if it reads around should be the body to deal with things.

[eismann]

That ecu mounts? on the daily edc16c39, the limiter is removed from the ecu....

[jared_poe]

all the power is €2 €3 and then up to the 2006 mountain Bosch EDC7 and ? them the limiter
With that tool you read it?
I have tried it with the Gallo V2 clone but really? I was not able to read any of the truck :(

[matech]

Very interested, too, to resolve this blessed limiter speed!!

here is a serial reading I did from the eurocargo:


I have not found anyone able to remove the limiter on edc7 so far.....

[carmageddon]

have you tried all the 4 bytes to a 16-bit value 9000?

[matech]

honestly so far I have not even made tests...

[carmageddon]

if you have time to search for the unique 4-byte you've described and put them to the met? the value of cos? see if it works or not...I indicated value 9000 why? I suppose that the medium is limited to 90 km / h

[jared_poe]

We at iveco for the limiter, change the code to alphanumerico. In mind, it seems to me that they are the first two digits, if tonight I have time I'll give you a look to be ir? precise, if I find I have to have two readings of a eurocargo before and after activating the limiter. Even if the readings are made by a Genius I think that you should understand equally what? the area of the edit ;)

[jared_poe]

For curiosity? matech what you did with the reading of the EDC7UC31?

[carmageddon]

what they do with the original tester ? independent from us? that happens on the ecu, if the disable option plan to raise the maximum value to a value that is not reachable it will have? always act on the maximum limit set...another thing is instead done to the switch software...but before drawing conclusions, without official information, ? need to do the tests.

[matech]

it would be a great thing! thanks

[matech]

Ah, sorry, I hadn't read the second page:

Galletto official, for me, has read and written without problems from a serial port.

I gave a look but I found only one point to 9000, you jared you have the file of which you spoke?

[carmageddon]

what is pi? simply look for the bytes indicated ?

- open winols
- drag the file to your half on winols
- prizes 2D in the bottom left window of the file you just opened
- on the toolbar, press the button to 16bit, 255, and hi-lo
- press ctrl + F, select in the top of the first tab : decimal
- in the empty field write 9000 and press enter (the cursor will go? the first value is 9000 which is on file from the starting point of where you put the pointer on the file)
- skip the values of maps or curves, and continues to press ctrl + F enter until you will find one on one, the 4 bytes of which I spoke to you

[jared_poe]

Ah, sorry, I hadn't read the second page:

Galletto official, for me, has read and written without problems from a serial port.

I gave a look but I found only one point to 9000, you jared you have the file of which you spoke?
No I have not why? I was confusing, the whole speech that I had made was about EDC7C2 eurocargo €3

[matech]

I had tried using the search function of the ECM, and is only a byte according to me plausible on the file that I posted, that is 1F07E6.

someone said that it is located in the micro ? true?

[carmageddon]

the bytes to 9000 are 1C3C90, 1DA1D6, 1F07E6, 1F4E38

try them one at a time to lower it to 4500 and see if it works

the limiter of speed? ? always in a flash but sometimes it is also found in e2p, then ? need to do tests to see...often the value ? in the clear, but also happens to find it is encrypted on the flash on the e2p

[matech]

therefore the diagnosis official working on the flash??

I would not like to work on the framework eprom, and then l? it remained a limiting value!

let? evidence: according to you, the risk of planting the ecu doing these tests in serial? I have made the bdm for the amount of work that entails....

[carmageddon]

if you have already? the fact of the previous tests go to good end, what? with the ecu is not there, why? should there be any problems with these bytes?

[matech]

I, in ignorance, I always ask :-)

when the touch of bytes that I don't know what they are, I always have a doubt!

[carmageddon]

when you do not have the security and knowledge ? always need to work with the pi? safe before making tests : BDM

[yellow]

Hi guys I hope not to go off topic but I have a stralis 480 with ms6.2 you say that the limiter at 80 ? in the ECU or in the bodycomputer

[jared_poe]

Hi guys I hope not to go off topic but I have a stralis 480 with ms6.2 you say that the limiter at 80 ? in the ECU or in the bodycomputer
Hello, the limiter ? in the eoc, if ? a half of work ? 80 otherwise ? 90

[franco-electr]

the limiter is located in the engine control unit and receives the speed signal from the tachometer through a can then not be removed manually with a cutting of cables, but only by modifying the alpha code