info on scodifica total 59f and 5am over a hundred

[duke]

hello I wanted to ask of the info in the pi? on these units it is practically possible to riverginarle to the tour s? if they are not virgins, they are not to write or, better still, I have a ecu coded and read it to the tour now in spite of you editing the file in hex. then if you go, re-writing, however, it remains encrypted and is not part of the right

[angel]

Above HW100 you can totally scodificare

[duke]

is the s? you can do the scodifica total? I if I have an ecu coded to the tour if I read the file I total then the rewrite, however, the unit I remains encoded, and not a part while if you do it in the boot with the clone and decode and re-virgin, I mean without putting it in the boot and without a decode dedicated you can do

[redline]

hello with equipment you can do what you want without problems and transform them to the exchange of soft etc and then making the total on these ecu you have to know that some things in the car do not work, type the temp remains at the maximum or the rev counter does not get up, and other things that now I don't remember if you have to solve some problem to ask

[duke]

thank you for the help you are giving me is the s? then cut the wires going from the ecu to the body was wondering when I have a controller with hw610 coded I have read the file ori to me, and I have sent to you, then I scodificato the file to the addresses due but the other person when I send him the file I write to? not part of practically tells me that the check only once, and not a part, and remains, spy on

[duke]

hello guys, someone that I can? give a hand I have done several tests on the file but still nothing thanks for any help

[redline]

hello me, you should send

[duke]

hello fuorigire and thank you for your help the problem is that the ecu I have the guy read me the file and he sent it to? I told him that if the ecu ? the virgin and immoff the bike not the partir? never I the file I tried to do so without decode to? still not the part

[egs]

Hello, if it does not, and remains, the light turned on ? definitely a matter of code. To me ? happened with a 5af that, the fact the file of scod tot, the unit remained encoded. The problem was that, even with the proper equipment, the file was not written all over it. Read the ecu in boot mode and written to the file, I have not had the pi? problems. Then I think you have to ask for it to send to resolve the problem, otherwise you can do the other 1000 files, but does not solve.

[duke]

thanks egs was what I thought it was only in boot, the I can do why? according to me ? with micro269 and not 168