Edc15p tdi 101 seat,some doubts on the map

[sportknight]

Hi guys,can you please tell me which map ? this?

2901

[sportknight]

nothing and no one?

[sportknight]

hum,I think it is some limiter but I want a confirmation

[franco75]

It seems like a linearization of the signal mass air flow sensor in the free spins feature.

[munro]

throw l?....but it would seem to a map or lambda "smoke" that is to say it wants.....

[sportknight]

Hum, I remember it to be different the map fumes

[munro]

not ? the maps all have the same "form" in the ecu are also different in the same family....
looking at the axes, it seems to me to see 5500 that should be, perhaps, IQ, and then I seem to see 4950, which I think are rpm.....in the Z-axis c'? a value that goes up to 10000 that I have not quite clear what it is....for this I have given in the dir that seems to me a map of the fumes.....ppi, I can certainly be wrong.....unfortunately I have neither the necessary experience nor the damos chirificatore to dispel the doubts about it.....
expect some more experienced tell her to?....
have you ever seen that enlighten us all...

[sportknight]

[dvdtuning]

It seems to me a pressure limiter diesel....

[franco75]

the X-axis ? the air flow rate, the Y-axis ? the no. of turns, if we take the case Z ? almost always equal to X, then according to me ? a correction of the measurement of the air mass as a function of rpm. Increasing it ? how to increase a limiter fumes

[jolidj]

well according to me and a fix.

[munro]

the X-axis ? the air flow rate, the Y-axis ? the no. of turns, if we take the case Z ? almost always equal to X, then according to me ? a correction of the measurement of the air mass as a function of rpm. Increasing it ? how to increase a limiter fumes
franco sorry ....just to be clear....but according to you, qul'? the x-axis??I am in the map I see, starting from left to right the third peak that v? on top of that ? the Y-axis that is up to 55000..then the X axis does not reach to 5000, and the Z-axis and moddato in the map that comes to a max of 10000 ori and p? more in the curve mod...

[franco75]

ok, swap x with y.
The y-axis, that comes to 55000 in the last value to me ? the mass air flow sensor. If you exclude the last value only to me ? a sort of scale, the values of questasse you, you will find them in the Z-axis.
Ex: if you have 5000 mass air flow sensor, map, will give you 5000. There are fixes only speed zero to the curves from 2 to 7. for the rest you have in the output from the map the same input value of the y-axis.
I hope I was more clear

[munro]

I don't follow I'm sorry.....according to me the order of the axes ?:Y>X>Z.
now in Y there are 55000 scale a mass air flow sensor stuff like this not the law as being a edc15 law the air in mg and the maximum you can? read in mg are less than 1300mg that in the map I think that would correspond to 13000 full-scale...then in the bottom of the scale of the Z-axis I will read a value of 10000 or slightly more.....I don't understand where you see the same value in the x or y axis pressure that are......

[franco75]

perhaps it would be appropriate to speak with addresses in the hand and not with a photo

[munro]

http://img267.imageshack.us/img267/6784/edc15vseat.jpg (http://imageshack.us/photo/my-images/267/edc15vseat.jpg/)

[franco75]

Watching a file of the type known to the xaxis ? a temperature, it goes from 2531 to 3431.
The peak that you indicate actually ? besides the map.
If you go at 6000 or more in the Y-axis in the map you will find the same value regardless of the value of the X-axis
In conclusion, according to me ? the correction of the mass air flow sensor as a function of intake air temperature.

[munro]

for me in the axes c'? in Y iq,55000, which may be 55mg and X I see little 5000 that could be rpm,while in the Z, I see a value from 0 to peak at 5000 and go "altalenando" up to 10000....that honestly escapes me as to what could be....
The Magi are you there??what do you think of this map???

[sportknight]

? a limiter, diesel, according to me,otherwise I can not explain why? all the change in parcentuale

[munro]

it could also be a map n75 duty cycle for?....

[magi1984]

? a map 10x16 conversion mass air
limit? the fumosit? with the conversion of the mass air
factor offset 0,1
unit? of measure mg/cycle air

data taken from the damos is another vag edc15, but always with the same ecu is

[sportknight]

tnx magi,always precise and accurate :)