addresses immof control unit 5am

[duke]

hello can someone tell me the pu? confirm the addresses of immoff are 000070 to 00007f0 all in ff right then if I can check this file if it's good when the bike turn the starter but will not turn on

[gfr]

I think that it is a ducati, but I regret to tell you that I have done these tests, but I assure you that if you do not scodifichi with the atrezzo impazzisci seen that and the e2p that you have to verginare

[coma]

I will guarantee you that the immo off can you? do flash
it seems to me that an example is gi? posted by Legendaryslave (I had given me the solution and I have tested it)
and then, perhaps, on the other acronyms of the ecu must be working on it, but that ? another story
If you put in immo off to flash the e2p even think!!!!!!!
:)

[gfr]

ok but what with the laws?
I may or rooster, or mpps not the lego well

[legendaryslave]

the mag goes divinely on these ecu

[coma]

I read well with Mag and Gallo V2
The MPPS I've never tried it, but many use it

[gfr]

Then I ask you, if you tell me how to do it because there are never successful, and I have 2 blocked would interest me very

[coma]

C'? an example file.
I can not go beyond the rules of the forum.
As soon as you get to 80 messages you will be able to download it.
Believe me non c'? nothing personal, it's just compared to all the others.

[gfr]

go quiet apettro' the amount of time I have, but I wanted to know physically with the mag as the laws I've seen a pinout but the law is bad the ecu !! this I ask
and also the cock in the boot, relying on the pitch booo

[duke]

hello gfr if blocked, the units do not toss them away with a p? patience you unlock and they operate for any help no problem

[zondra]

hello guys desiderei know I also addresses...

[davidehfnos]

hello post the file

[zondra]

hello david, listen, I've read 2 times the ecu and gave me 2 different files definitely one of the 2 times will be bad bed I have them both, you can see which is good and possibly scodificare ? thank you very much.

[darksoulbreaker]

but in the bdm you can read and write?
and you can do it only cn the ecu without having to keep connected to the bike?

[coma]

The Bdm is used for other control units.
The 5am they also make a bench, observing the pin-out

[darksoulbreaker]

then having only the ecu...can I connect the pinout and read it?

[m999]

then having only the ecu...can I connect the pinout and read it?

Certainly, to read and write, having at least the foresight to nourish it in a safe and stable manner, and providing the power that simulates the key-on with a switch that can be used to simulate the on/off of the picture. A stabilized power supply from the tour would be the optimal.

M999

[m999]

Returning to the bomb on the speech immo-off of 5AM, we place the two files tested a 999 base MY 2005 (136HP engine). With a simple hex editor, you can assess by yourself where to intervene to make the total working on the flash. This is the map of the bike in its original configuration.

4798

4799

M999