Sign in

View The Full Version : help on map passat 180 hp v6 2.5 tdi 4motion



pinotec
11-07-2012, 22:47
hello to all
I have a problem on this car... in a few words ,when you touch the maps dw.. even a little, the machine with the higher gears after the 3000-3200 rpm ..tends to the wall quite a bit... and leaving slightly, the pedal feels that restarts to take turns... by putting the maps dw ori the problem disappears.. or to be picky the mild mild.. almost imperceptible... now I wonder is there going to be some limiter that cuts diesel oil after 3,000 rpm ? may be at this address 001BDA ?
at the moment this mod
advice ? :)

admin
11-07-2012, 23:20
You have to put a pasw?

pinotec
11-07-2012, 23:47
you ,and send it via pm
if it is a problem take it off,but I would prefer to keep it

admin
12-07-2012, 00:15
Missing several maps including
enrichment in the acc
injection at full load
injection f air temp
inioezione correction air temp
Then the limiters we pair are low alzali at least a 25%
there are maps that I know of after the injection choked ?
increases in diesel a little bassini
press the turbo is not to be 150 points dalli uniformly from 1000 rpm up

zioweb
12-07-2012, 09:10
In this moment I can not see the map, but from what you say ? a typical behavior from too far in advance: how you touched?

msport (exil77grande)
12-07-2012, 09:43
then I saw the map,on the whole, but it is very soft,it could be a speech in advance of the problem even if it's low, how to increase and in accordance maybe try leaving ori maps in advance.

-pressure turbo ok
-diesel increases more from 1500 rpm up to the end
-limiters torque incremental more from 1500 rpm

if you want I could list the addresses of the maps mentioned by the admin, but the first test to do would be to follow my advice, remove the maps in advance and edit maps wide choice in acceleration and then let us know,with what changes?

zioweb
12-07-2012, 09:52
The other bit: I never put hands on this engine/ecu but I have a clear memory of problems in the mod map precisely related to the advance on the 6 cylinder you can give as the 4 worth this kind of problems. As if the increments to which we are accustomed, here have different effects, the most pronounced...

pinotec
12-07-2012, 13:32
oh guys, but the maps in advance are not the ones that the driver calls injection at full load???????
I touched the times .. and the problem is not that one... why even forcing ori does the same thing
the lim torque calculating that has automatic transmission ..I believe that exceed 15-20% is not healthy for the exchange
there must be some other limiter..and then on these machines as you tap the anticipopicchiano in the head.. better to leave it ori(I tried that as well)
I repeat... the problem and when do diesel from the maps dw (enrichment in the acc)

msport (exil77grande)
12-07-2012, 14:07
soon this forum will provide you the service files on-line of any kind but until then because it's not ready yet, you should be free of charge to try out one of my mod to see if the music changes?I'll give you a step basis, then, if not the walls, and not much more we complete what do you think?

pinotec
12-07-2012, 14:19
thank you msport, to test your map, there are no problems... only that it is not a thing immediately,if for you there are problems ,I think, would you do me a great kindness.

msport (exil77grande)
12-07-2012, 14:30
thank you msport, to test your map, there are no problems... only that it is not a thing immediately,if for you there are problems ,I think, would you do me a great kindness.

ok,when you could do some tests on the car?

pinotec
12-07-2012, 14:44
the precise day I don't know', and the machine of a friend of mine.. I should I feel..the main problem is not so much load the map.. but that I would like to have a bit of time to try it out with a diagnosis attached..then I have to find a day that is convenient to both of you..that's why in the previous post I said that is not as immediate as what.

msport (exil77grande)
12-07-2012, 23:06
here's the map to try, as I said, it is a basic but let's see if anything changes then from there we will see what to do,pass in pm.

pinotec
12-07-2012, 23:14
the only suggestion received was to replace ori advances ...but are already ori....
the map and soft because of the problem exposed in the first post,and useless to do' diesel if not then I find first thing in me to the limits.
at least I think so... can it be that I'm wrong and I'm staring .

pinotec
12-07-2012, 23:15
thanks msport while I was writing you posted the map... but I still can't download it

msport (exil77grande)
13-07-2012, 14:47
thanks msport while I was writing you posted the map... but I still can't download it

let me have your address ***** that canvas enter.

pasquale78
13-07-2012, 16:48
the only suggestion received was to replace ori advances ...but are already ori....
the map and soft because of the problem exposed in the first post,and useless to do' diesel if not then I find first thing in me to the limits.
at least I think so... can it be that I'm wrong and I'm staring .

I friend pinotec.
I know a little about the history of this machine and say that some test together ? been made.
the curves that create the problem are those of the dw.
advances from the beginning were left ori, just to avoid problems.
we are talking here about a 29f800 on which there are a myriad of maps.
not ? the classic edc15 of the vag group. on those and I guarantee you that the friend pinotec knows things!
unfortunately, over the past few months I have had to do, and no I have been able to focus much on this car.
let's see later if we can understand what ? that limits.

pinotec
13-07-2012, 22:49
not ? the classic edc15 of the vag group. on those and I guarantee you that the friend pinotec knows things!
a greeting and de-core the friend Pasquale ,but you're making me blush :)
I see I have a good teacher :D

you dear easter ... me you said that you try to put the ori those curves.. and in fact the problem and gone
as I can, I will try the map posted above.... now and become a challenge is the machine.
let's see how it will end :D

msport (exil77grande)
14-07-2012, 12:33
the map sent by ***** but I want to understand if my base can go then together we can continue without problems and see if we can make it go more, maybe, but well,pinotec should the thing.

mavaila1972
10-08-2012, 13:40
Injection phase-increase in max 4? ok for automatic transmission for no more than 15%; and if not remember bad and an injector pump so the dw you have to deal with in a different way:p

msport (exil77grande)
10-08-2012, 15:21
Injection phase-increase in max 4? ok for automatic transmission for no more than 15%; and if not remember bad and an injector pump so the dw you have to deal with in a different way:p

I did not understand what you say to the faseiniezione.

mavaila1972
10-08-2012, 15:27
I did not understand what you say to the faseiniezione.

advance splash