Opinion improvement map gp 75hp and clutch problem

[abberello]

Hello everyone, a client of mine brought me a map to load on his grande punto 75hp and seen that ? equal the same of my I decided to upload it also I gave it a try. The machine ? ready, has a nice shot and pushes hard at all rpm, with a slight decline after the 2900. So far nothing bad...on the contrary!!! The problem ? only one... to me after 15 days he started going to shock the machine as soon as I leave the clutch, only with the first. Example: without speed up, just pull the clutch, the machine is not smooth, it goes to shock... even if accellero a little and childbirth, the machine goes to shock... a problem with the clutch. The number of my customer I lost it and I don't know where to go to find a visa that does not ? even my country. Now I would like to know from someone if you can? be depended on from the map that consumes the clutch or if you have had some problem with my regardless of the map. The foot pedal ? very light, as if it had a new clutch just fitted.. I Would like to have first of all an opinion from some expert, I know that has values with increases in exaggerated on the limiters... possibly some advice to improve it.

[mariodarkblue]

Hello everyone, a client of mine brought me a map to load on his grande punto 75hp and seen that ? equal the same of my I decided to upload it also I gave it a try. The machine ? ready, has a nice shot and pushes hard at all rpm, with a slight decline after the 2900. So far nothing bad...on the contrary!!! The problem ? only one... to me after 15 days he started going to shock the machine as soon as I leave the clutch, only with the first. Example: without speed up, just pull the clutch, the machine is not smooth, it goes to shock... even if accellero a little and childbirth, the machine goes to shock... a problem with the clutch. The number of my customer I lost it and I don't know where to go to find a visa that does not ? even my country. Now I would like to know from someone if you can? be depended on from the map that consumes the clutch or if you have had some problem with my regardless of the map. The foot pedal ? very light, as if it had a new clutch just fitted.. I Would like to have first of all an opinion from some expert, I know that has values with increases in exaggerated on the limiters... possibly some advice to improve it.

2708

Hello abberello...no ? a problem of the map, which you have had from the beginning..? just the friction of the 1.3 mjet that after a p? is it so?...and ? cos? on 3 gpunto that I have tried..two 75hp and a 90...the same defect..tears in the start...(we are talking about cars with mileage around 60,000 km and no map).

[cinqueturbo]

The test in s frizionarla a bit,
how to clean it..
I happen when you go out in the streets flooded.. let me know;)

[alfajtd]

pi? pair from the pi? consumption the clutch... definitely in the map posted by you don't you save...
besides being a tad exasperated and touched at critical points... strange that you will not signal the failure of...

[explode82]

hello, the map is not ? grand ch?,starting from the fact that both of the injection times that of the pedal ? party too much from low revs,doesn't it ? been touched the rail,and finally has changed the management of the turbo as a 90hp when ? a 75hp,but it sure is not the problem ? the map

[mariodarkblue]

The problem ? the clutch, guys...xk? the misled?also with original clutch and original map...

[explode82]

in fact, I said that it depends on the clutch....especially those of 75hp not worth a butt

[msport (exil77grande)]

and in any case, each machine has its history and its wear and tear doesn't mean anything, the fact that your with a map more soft has had problems with the clutch and its not even having a map more aggressive obviously yours was next to the replacement.

[abberello]

I provatoa take a p? by shifting the clutch.. for about 5 minutes in a row... I'm not saying that it stinks!! But the problem with that ? almost gone completely! Regarding the map you have tips for me to improve it?

[cinqueturbo]

I have recommended it to rub a little not to destroy it...
stationary with the handbrake on as s? I had to start the climb....

[alberto.bf]

It is a problem of the clutch must be replaced, it tears?... Already are defective of them a little more to the center... a bit your foot and the gioko and made...
Now you have to replace it before it leaves you walking to me I recommend nn the sforsala much until I change it....ciaooo

[mariodarkblue]

but you have to slightly strain, do not burn!!!!5 minutes of sfrizionamento...by its fire!!!anyway, I can confirm, according to me, the prox you should take a clutch rinforzat...;)

[abberello]

After the sfrizionata yesterday the problem ? gone! I work in a small auto parts store and I've never understood the clutches reinforced where they are, and those who produce them! I like clutches withdrawal AP, Luk, Sachs, Raicam, Mecarm, Quinton Hazzel and Valeo and seeing the online catalogue and tecdoc, there is only one code for my car!! also to withdraw the Fiat to me from a code only!

[mariodarkblue]

After the sfrizionata yesterday the problem ? gone! I work in a small auto parts store and I've never understood the clutches reinforced where they are, and those who produce them! I like clutches withdrawal AP, Luk, Sachs, Raicam, Mecarm, Quinton Hazzel and Valeo and seeing the online catalogue and tecdoc, there is only one code for my car!! also to withdraw the Fiat to me from a code only!

Look, forget about find clutches, which are reinforced in the catalogues of aftermarket replacement parts...of spare parts equal to the original...anyway, I personally I mount a clutch CO.Me. ? a company of milan...look it up online...
I know others who have also fitted sachs performance...

[explode82]

I know that it is a modification on the clutch,which consists of consumarere of the pins that prevent the perfect adhesion between the clutch disc and the flywheel,consuming adheres to the pi? and do not have the problem of the clutch slipping,I know why? when I make beautiful maps thrusts,I let him do this change by a mechanic and do not have ir? problems

[mariodarkblue]

Hello explode...I'm sorry, but I don't understand what is changing...are you referring to the pins that hold the friction material?

[explode82]

with precision I can't say,but I will let you know as soon as I feel this friend who makes these changes

[mariodarkblue]

hehe and of course I'm interested!:) anyway, we're almost neighbors;)

[explode82]

why? where are you?

[mariodarkblue]

Hello explode...I am casoria...

[abberello]

No suggestions on how to improve it?

[mariodarkblue]

Look...I would like to try to help out..but I can't download the allegat...
anyway, what would you more?

[explode82]

begin by doing the rail and the limiter of the rail and torque limiters that are missing and see that gia will very best auto

[pdtechnology]

hello abberello also according to me the map ? exasperated, I in my opinion, rivedrei the map of the pedal, and according to me riguarderei torque limiters........to improve it, you can still play with the diesel and moddare map lambda', but careful of the smoke............and if it still does not satisfy you, then try also with the advances........and also follow the suggestion of explode82....... good fun

[explode82]

in reality, there are things to review,but with the advice that I gave him already will see a difference,then other things such as the lambda, not the toccherei,why? matters of temperature, not knowing the car that midifiche mechanical there are

[pdtechnology]

but in fact, I also agree with your opinion, in fact, I told him to follow them......I wanted to give some other input....anyway abberello I always I advise you to review the limiters.....always good fun!!!!

[abberello]

Guys, after a lot of miles and without sfrizionare or things like the problem of the tear ? disappeared altogether!!