Help on Alfa 159 2.4 200CV

[jared_poe]

Hi all, I have a friend who has this car and asked me if I can get her to eat a little less, she also wanted to fix the problem of cold start. This car has the automatic transmission.
I made this map, what do you think?

[emilground]

Maybe you have a little exaggerated in that the ECM calls "torque during the start-up"
1C30E8 return it the original ? a map relative to the regenerations
1C4B08 and 1C4BD4 you could also let the original, just a 1C4B70 and 1C4C3C brought to 0
1CDC90 and later carried the original ? the map conversion
The turbo do the work too low
the rail pressure is not good ? too high to the low. Too much pressure to low could make you seghettare the car and still not need

[jared_poe]

thanks emilground for the answer, with regard to "torque during the start-up" actually ? as a test, I tried to give the required torque that I have to -30? also to the other temperatures, you know how to change the map to solve the problem of starting from cold?
The QI is the I throw the original and I placed the turbo, as far as the rail pressure to low, I made it cos? why? according to me the rail pressure minimum must not ever fall under the 300/320 bar, what do you think?
the maps egr I found them so? why? the car was already? been mapped.

[jared_poe]

Ok tonight I put it on, then I'll know

[admin]

All cars with automatic transmission or sequential consume more of one with that of the manual,the map you can do a little,different speech if it has the fap off
decrease the consumption

[jared_poe]

however, now it seems to me that when v? in the bike go better.
you usually how to solve the problem? as I have done or changed otherwise?
with regards to the consumption we'll see.
the fap I honestly do not s? if the has taken off, in the map that I have read there were some changes which seems to me to relate to that.

[sportknight]

from the map it seems to have removed the dpf