info opel corsa 1.3 90 bhp

[cicciogsr]

Hi everyone, what tool can you? write the ecu of this car? should be a mjet+ different from other 6jf... in the database I saw that there are of the gold type this

opel corsa d 1.3 mjet 90hp nevertheless, 603.sa/hw03a/3333.sa61

the cock v2 clone of reads and writes? mpps and others do not even have the id..

[magi1984]

only the BDM to the law, while writing you should not have problems with the cock

[cicciogsr]

writes the file to 2mb?

[cicciogsr]

the virtual read the f? and then it takes the mpc to write it?

[magi1984]

usually use the kess for those, however, gallo writes, read here: https://www.professionalchiptuning.net/showthread.php?2072-Quale-interfaccia-per-1-3mjet/page2

[rego88]

no no.....the rooster v2 is read in 10 minutes and 22 seconds (real and virtual read and write in 57 seconds, go quiet.... I've read three, and that of my girlfriend (the one of the file ori that you quoted above), I've read and rewritten a dozen times.... ;)

[cicciogsr]

rego worries me is the ecu, why? mpps and mag I can't identify? I checked the ori posted by you and the maps seem to me to be the usual... but then it reads the file to be 2mb, and then rewrite it the chicken?

[cicciogsr]

the code of the file ? 3333sa61 rego ? equal to your own?

[MKIII]

no no.....the rooster v2 is read in 10 minutes and 22 seconds (real and virtual read and write in 57 seconds, go quiet.... I've read three, and that of my girlfriend (the one of the file ori that you quoted above), I've read and rewritten a dozen times.... ;)
I agree with rooster clone I have written and read 2

[frantik3]

the gallo gold and china, the reads and writes

[motorsport]

guys thanks for info..he or made a couple in the bdm, the next I do with the chicken!!

[giarras]

ciccio, go quiet and charming the cock of the ago, and well..

[FidodidoTuning]

I confirm that I made the corsa D and astra H mjet 90cv

[neo]

Then write with MPPS but if you have a file 2mb bed in the BDM, you have to first taiglire

[rego88]

ne mpps ne magpro2 ago.... already tried, does not identify anything, because the run d ? can and the fiat are in the k-line.... among the various protocols of the cock c'? its written on the protocol to select corsa d 1.3 can.... anyway, the file of the race that I did (one of my raga) ? the 3333sa61

[FidodidoTuning]

The problem is not neanke the line can,for example, the 500 mjet and in can but not good for the same
And really different...
Mpps will not do it for sure

[giarras]

you're right, fidodido, mpps nothing to do,as a clone gallov2.

[rego88]

The problem is not neanke the line can,for example, the 500 mjet and in can but not good for the same
And really different...
Mpps will not do it for sure

sure, the law and writes it in the can, but also the protocol ? different.... as mpps that magpro, he does not see, does not makes id and nothing else.... the cock does it all....

[cicciogsr]

Ok thanks as soon as I can I try...

[explode82]

anyway, I confirm that reads and writes to serial all.......at least the ori so ago,as a result I also think the clone

[Danny]

Guys like ? over? I'm not there I'm to understand more? nothing. In swift, it tells me the codes OPEL in sw and hw, mpps makes me ecu id, read file from 448kb, where there are maps for?, and when I try to write to the file cut to 1 mb, it tells me that ? encrypted, and can not? continue. From what I'm understanding, the Swift ? an Opel practically, for? here differs... :S With what I write sure?

[tt225]

Guys like ? over? I'm not there I'm to understand more? nothing. In swift, it tells me the codes OPEL in sw and hw, mpps makes me ecu id, read file from 448kb, where there are maps for?, and when I try to write to the file cut to 1 mb, it tells me that ? encrypted, and can not? continue. From what I'm understanding, the Swift ? an Opel practically, for? here differs... :S With what I write sure?

Galletto 2
The Mpps in this car, you only reads the Micro maps are in the Flash

[Danny]

But ? safe? the v50 of the rooster, okay, or does it take the v51?

[tt225]

But ? safe? the v50 of the rooster, okay, or does it take the v51?

Vabbene also the 50 , and 48

[giama'a]

become around and there are many cocks that you do not understand most of which version is more reliable ,and how to make a terno of the eight

[Danny]

Gi?...I still don't understand, what is it ? the clone, and which the ori....xD

[msport (exil77grande)]

Gi?...I still don't understand, what is it ? the clone, and which the ori....xD

the original and one-on-one and cost more than 4000€, therefore, difficult to make and confusion,and the clones it around and if you don't take in a place that you know you are likely to spend money unnecessary.

[Danny]

Understood Daniel....
Instead, why? MPPSv12 about opel 75/90, not to do the ecu id, and hand it to me, that comes out, however, the opel, you? :O

[msport (exil77grande)]

Understood Daniel....
Instead, why? MPPSv12 about opel 75/90, not to do the ecu id, and hand it to me, that comes out, however, the opel, you? :O

good question you should ask before the creator, and then to the cloner.

[Danny]

:eek:

Mah, I do not understand pi? nothing...I Would like to have a 69cv....xD

[msport (exil77grande)]

:eek:

Mah, I do not understand pi? nothing...I Would like to have a 69cv....xD

would it not be easier to use another programmer?
I made 2 very good proposals you do.

[Danny]

Oh, I know Daniel, but unfortunately for now I do not have the cash to be able to take a galletto v2....
On the net I read that magpro about opel don't even... :/

[msport (exil77grande)]

I don't know but I told you, the test satisfied or refunded.

[giarras]

Oh, I know Daniel, but unfortunately for now I do not have the cash to be able to take a galletto v2....
On the net I read that magpro about opel don't even... :/

listen to the advice of msport,with the one you recommended go quiet and charming.

[Danny]

listen to the advice of msport,with the one you recommended go quiet and charming.

To power, I would have taken the Cock V2 that c'? on the forum, cos? I then had the chance? take the template, and a tomorrow, if everything went well, have practically the bdm...But unfortunately, I do not work, I am a student, and not working...I had known that before, I would have waited to get more? euros, and I would have took it straight away :/ we'll See more? next...

[zioweb]

but you can read them ste corsa D 1.3 in the CAN?
I have one that I can't do it, with the gallo V51 it with V53, which I have kindly provided!

[sportknight]

sure that you read,gallo v50,that I personally gave him problems, why? every so often freeze in the met? writing and I had to repeat,write very slow, among other things

according to me, but the tension was a little busted,that's why? I had those problems...

[zioweb]

I have a friend, who also pays to have it done (or at least, would pay), but you cannot read it!
I by mistake SilentKey... boh! Two programmers tried both same result...

[Alfa159 q4]

She has problems with your instrument, flaw in the bdm and go safe

[zioweb]

She has problems with your instrument, flaw in the bdm and go safe

The owner does not want to intervene by removing the ECU ahim?, if no had done! For? the eye that I used 2 different tools... With the same result...

[Alfa159 q4]

what year was it ? the car?

[zioweb]

? 2010: a year... but finally this morning ? figured it all out.

[Alfa159 q4]

the past year I have made the same error when I tried to id do with mpps and she did not recognize, and then opening the hood, I got it.
This is located under the windshield wiper on passenger side, and does not unmount well either.
The read-only boot tricore.

[zioweb]