PDA

View The Full Version : file info *.mpc......



Emanuele54
01-02-2013, 09:48
Hello all,
I'm looking for, lately, especially in the mjt (e.g. grande punto 75/90hp) that when I read with magpro2 V4 I create 2 files, one normal that corresponds to the one you want to modify and a second with the extension "mpc" that very probably ? the file that handles the microprocessor......


now I would like to know if someone s? if I were to write the file to the above-mentioned another control unit, the bloccherei?
then mpc files are the same for all units of the same cars (ex. GP90cv they all have the same file mpc) or are they all different? and therefore I have to have the mpc file for each controller?

Thanks

James
01-02-2013, 19:34
because you have to complicate your life? each ecu that you always do the reading backup

msport (exil77grande)
02-02-2013, 01:20
of course, the mpc that laws can only use with that type of hw and sw.

Emanuele54
02-02-2013, 17:03
Hello, the fact ? that if I wanted to clone an ecu?
Thanks

admin
02-02-2013, 17:19
Hello, the fact ? that if I wanted to clone an ecu?
Thanks
If you need to clone it, you need to read the backup of the control unit, and then write it on the other

panny200555
10-02-2013, 10:03
If you need to clone it, you need to read the backup of the control unit, and then write it on the other

even if the number of hw and sw of the other ecu ? different?
for example: a edc16c39 to clone it on another ecu ? edc16c39 but with hw and sw is different..

tronic
10-02-2013, 10:40
no you can't hw and sw should always be the same

panny200555
10-02-2013, 10:55
hmmmmmm....thanks for the info!

explode82
10-02-2013, 11:48
Or, at least, hw and sw should be very similar, but always try

tronic
10-02-2013, 13:07
believe me that if hw or sw are different, the control unit does not find the input or output of any signal

explode82
10-02-2013, 14:07
If the sw and different ok ammenoche is an upgrade ,hw instead, there are numbers that are compatible species to those where the micro is not the law.......for example, I have replaced a edc16c3 peugeot even with a edc16c34 under the advice of a friend and the car and the bike and runs good for a year and without errors in diagnosis

panny200555
10-02-2013, 15:54
hmmm... your statement confuses me even more? :-(

explode82
11-02-2013, 00:43
the speech always depends on the ecu from the car and get a replacement,I often ? happened with the peugeot that even with the same hw does not go well why? the micro was different,for this I say to you ? always try......you like bases, keep in mind to find the same number of hw then if you can't find it,perhaps where to find him, to speak to us and tell them that if it doesn't go well, and reporting it so not to throw money

panny200555
11-02-2013, 12:07
thanks explode82! terr? behalf of your board!