Tips remap Chevrolet Cruze 2.0 VCDI 150 hp 951_445

[panny200555]

Hi guys,

After many months of study,observations, comparisons, maps etc I tried the remap of my car and I would like to know the opinions of you experts!
For courtesy motivated corrections so that I can understand the logic of things :-)

Chevrolet Cruze 2.0 VCDI 150 hp 2010
Bosch Edc16c39
0281015445/ 96983951
In Ecm Titanium use driver 951_445

Luca stanca gi? done and works well.
also did the EGR off.

You opinions!

Thanks in advance.

[jolidj]

1d3590 they are?? those are the steep of the maps . nn and a change in thought, maybe you and the party of the mouse.
according to me the egr off are the 1c4c02. I also think that it will make a lot of smoke. anyway, I'd recommend you to redo the lim torque and touch their kindred .
review the maps turbo if there are similar , you can give other 50p without problems. lowers the maps that you have given 20% , lowers the map the pedal. advances leave them original, but you can try it even so , damage to nn do . good job.

[panny200555]

Hello

then 1d3590 second driver ? "deal? fuel injected" : why? ??


- EGR is 1EEE2C-1EEE5E and 1EEE92-1EEEC4 Egr to me ? been confirmed by ir? people! then ? this!
- why? you say that to? a lot of smoke?
- you said to redo the lim couple and also their related : what? can you be more precise please?
- lowers the maps that you have given 20% : what do you mean?
- advances leave them original: ok...but can I know the reason/logic?

Thanks for the patience!

[panny200555]

then I redid the file following your advice.


- the amount? fuel inett, and advances : I left them golds...I don't want to overdo it already? at the first blow... them to? pi? next
- Pedal: I have lowered it to 5%
- Lim. the pair get up to the high
- Turbo and rail : they were alright I guess.. then if you need to increase 50pt

Then since the quantity carbu. injected and the time I have left ori... so that should not smoke right?

thanks

[panny200555]

any advice?

[panny200555]

1d3590 they are?? those are the steep of the maps . nn and a change in thought, maybe you and the party of the mouse.
according to me the egr off are the 1c4c02. I also think that it will make a lot of smoke. anyway, I'd recommend you to redo the lim torque and touch their kindred .
review the maps turbo if there are similar , you can give other 50p without problems. lowers the maps that you have given 20% , lowers the map the pedal. advances leave them original, but you can try it even so , damage to nn do . good job.

hello
I found these 4 maps out of driver, please can you help me to recognize them? I don't know what they are?


1C1414 -->IC1580
1D02D2-->1D0474
1ED9A0 --> 1EDB2E
1EDBE4--> 1EDD72

I enclose also screen and 2 file for better understanding.
Thanks

2653265426552656
2657

[jolidj]

1d358e that change, and??

[jolidj]

1d358e that change, and??drivers nn I use them and I can help you. to touch you , pedal,time,torque,turbo,rail. just.
try to write this that you have , let us know how it goes. if nn ec practice the theory nn is :)

[panny200555]

1d358e that change, and??

according to the driver ? quantity? the injected fuel.
see the screen.

2658


immediately after c'? another map similar always x amount? the injected fuel.

[panny200555]

1d358e that change, and??drivers nn I use them and I can help you. to touch you , pedal,time,torque,turbo,rail. just.
try to write this that you have , let us know how it goes. if nn ec practice the theory nn is :)

[jolidj]

I see a doodle and just at that address. you nn you touched no torque limiter certain that you will limit the machine.
If you have the opportunity to try it try it so , you will serve as an experience.

[panny200555]

I see a doodle and just at that address. you nn you touched no torque limiter certain that you will limit the machine.
If you have the opportunity to try it try it so , you will serve as an experience.

I put the screen with the changes made... so see what I've done... tell me what do you think?
anyway tomorrow I try this map.

2660

[jolidj]

here it is. at the beginning of the map you see that strange change??? mica and normal.give it a try and go to know.

[panny200555]

in fact, you're right... first the eye seemed to be a change that I have done through the driver.. but looking good ? one thing out of the driver then I do not know from where it had jumped out... mahh.*****o I removed it.. Now I try tomorrow and then we will see....

[panny200555]

I tested the camera! not bad at all! pull enough from the 1500-1600 rpm...
the thing to improve ? the recovery of the first and second gear (this car suffers from is the hole of power at low revs to the first 2 gears).

[jolidj]

very good. if you like to you we are happy all. good fun .

[panny200555]

hmmmm... must make improvements....

[panny200555]

very good. if you like to you we are happy all. good fun .

hello!
I tried the machine for 3-4 days! I still have the problem of the loss of torque/power at low rpms... especially in second gear between 1100-1300 rpm...
I am in the driver titanium I have maps torque for each gear... I can act from them? but I always say that you touch the things from 1500 rpm up...
what do I do? :confused:

[magi1984]

normally it starts from them not too easy on the clutch. then each one ? ****** to do as he sees fit on his car

[admin]

hello!
I tried the machine for 3-4 days! I still have the problem of the loss of torque/power at low rpms... especially in second gear between 1100-1300 rpm...
I am in the driver titanium I have maps torque for each gear... I can act from them? but I always say that you touch the things from 1500 rpm up...
what do I do? :confused:

You can raise the lim of gear, especially the 1 and 2,I have not looked at the map, but they are usually the lowest of the other,tries to give increases in the rpm low and see,again I have not seen the map but they don't do a maximum of a bit of smoke

[panny200555]

normally it starts from them not too easy on the clutch. then each one ? ****** to do as he sees fit on his car

the magi, you should do the reason that it starts from 1500 to not give a prompt to the clutch, for this was wondering in this case what to do?

[panny200555]

You can raise the lim of gear, especially the 1 and 2,I have not looked at the map, but they are usually the lowest of the other,tries to give increases in the rpm low and see,again I have not seen the map but they don't do a maximum of a bit of smoke

Thanks Mario for the tip! Now I try with the increase of torque to the first 2 gears from low rpm.
in addition to this, where can you? take action to eliminate this problem?
thanks