View The Full Version : mercedes clk 220
hello all, I am going to read and then to write a clk 220 cdi 2008 I believe that the mountains are a edc16c31( I don't want a stupid) , I can do with a mpps v5 without the risk of blocking it???
thanks a lot to all of you..
mbe's no way you can give the assurance that nn the blocks , even if you have official tools . anyway, with a bdm near you equal the cuxo.
thank you for having responded to me, but if I were to use a kess clone , the probability? to lock it ? the same, or maybe ? pi? reliable?
blackwolf76
01-02-2013, 10:39
The clones are all good... depending on the quality.
Connect a booster and go with mpps, first of course you need to read and from there you make your gi? with a report.
How much voltage should have in order to work properly?? More than 12v
blackwolf76
01-02-2013, 12:34
Just that you keep on the 12-abundant...
On the old w203 when collegavi the serial cable, started the engine fan to maximum, decreasing drastically the voltage system. Anyway in lettuna you can't do damage... try it and see how it behaves.
Just that you keep on the 12-abundant...
On the old w203 when collegavi the serial cable, started the engine fan to maximum, decreasing drastically the voltage system. Anyway in lettuna you can't do damage... try it and see how it behaves.
blackwolf76
01-02-2013, 14:15
if you have problems with that part of the fan you can remove that fuse, even if the series should not need it.
tuommo89
01-02-2013, 15:24
do not remove fuses...... I have that machine and anke if you take the fan the same.....at my expense, I discovered after having stuck with mpps!!!!!
tuommo89
01-02-2013, 15:26
is the fan part and how =(
do not remove fuses...... I have that machine and anke if you take the fan the same.....at my expense, I discovered after having stuck with mpps!!!!!
Then you say that the mpps not really sure on that car??
tuommo89
01-02-2013, 18:53
I nn I would tell you that the nn ? safe.....
I have removed the fuse for the fan ( then on the booklet are even 3) , are the games the same.....and the 1%? blocked and recovered by a guy in the bdm !!
I now have the gall v2 and I write it quietly ...ps: do not remove the fuse, but I put the booster !!! I WAS SURE
I nn I would tell you that the nn ? safe.....
I have removed the fuse for the fan ( then on the booklet are even 3) , are the games the same.....and the 1%? blocked and recovered by a guy in the bdm !!
I now have the gall v2 and I write it quietly ...ps: do not remove the fuse, but I put the booster !!! I WAS SURE
ok, then don't risk why? I only have the mpps and not the cmd.... thanks a lot for the tip...
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.