peugeot 207 problem!!!!

[carlo abarth]

then...I get is the machine in the workshop in rigenrazione from the outset that it is machine l had mapped and washing the fap without sfapparla "and I suppose that l have emptied of all "...I open the ecu and I find dell oxide on a soic 8 was stat mal closed I triellina clean it, and I read the ecu process with time the car does not regenerate, and it is good... on the motorway if the car the hot shot because of the cold I have not noticed that they are doing or perhaps not really ,when I break the 3000giri the turbo as you assentasse and after that resumes the slow way ever happened to you??? also, by pulling it from a standstill in progression with the higher gears the turbo as close and later reopen but not as low gears ,you notice it especially when you get behind a slow machine and wants to resume the rpm puts us more time than usual, but always due to a load of turbo below the threshold standard, I think that emptying the fap (not done it myself)do this by default???!!!!tips????I attach a file that is read in the bdm mapped and sfappato with time, and a file that is read on the serial line the original!!!

[Gerard]

Time is not a for these car

[mindafuttu]

Try to process the file with carsoftware or Meucci.. Should be good to go

The original file I mean...

[marcusmagic]

ciao.in so you have to see how the year made this file! that', I mean that bit the year touched if the year touched the right bits and everything.but definitely the year with some soft type, time, etc, then I suggest to remove the fap and replacing it with a pipe that you can buy in the web...and tell me one thing you've brought regeneration to zero before writing the mod file??

[admin]

To 90% and the FAP that does not ? been deleted as well

[marcusmagic]

I agree with admin, the fap has not been deleted as well..and on this machine you need to lower even maps of the dtc fap!!..I recommend to switc fap :)

[mindafuttu]

I marcusmagic...

Even if you usually do not go down, at least I speak to x as the work I do, but I will change structurally.
Question ot:how to change your own post?

[msport (exil77grande)]

Even if you usually do not go down, at least I speak to x as the work I do, but I will change structurally.
Question ot:how to change your own post?

their post will not be modified.

[mindafuttu]

Ok thanks..
It was just not to make you do the copy and paste of the post x group.

[explode82]

that surely ? the problem of the fap,I advise you to put some areas golds from dtc and the postiniezioni,and some are very small after the turbo and see that you will not be pi? problems

[marcusmagic]

that surely ? the problem of the fap,I advise you to put some areas golds from dtc and the postiniezioni,and some are very small after the turbo and see that you will not be pi? problems


in fact, you should not disable all of the dtc!!! but only those of the fap for causes which do not arise in the future!! no fap no dtc...

[marcusmagic]

in fact, you should not disable all of the dtc!!! but only those of the fap for causes which do not arise in the future!! no fap no dtc...

sorry I didn't have to answer in this section :confused:

[explode82]

I do not agree....I don't them off ever supeugeot and I have never had problems from 2years to this part

[mindafuttu]

I explode82...
Anyway, I think it is better to start from the map ori

[carlo abarth]

guys solved starting from the map ori or fixed everything the infamous trainer neapolitan had made a mess.....!!!

[mindafuttu]

Great news...
I knew that starting from the original, you'd be able to solve the problem.

[explode82]

the power of the ori has no equal XD

[mindafuttu]

Right explode82
The original map ? always the original map

[marcusmagic]

you have done well to start from scratch!! the only way you could uscirtene without problems...

[mindafuttu]

:-D :-P just observation