Removing lambda Car TT 2.0tfsi med 9.1.5

[magi1984]

guys anyone know how to delete the lambda sensor after the catalytic converter on this car?
I tried it with time, but the file does not work, after 3 days, the light of the failure of the lambda probe returns.

here is the id:
HW: 0261S02084
SW: 1037386455
VIN: TRUZZZ8J971010888
Ver.SW:
Spare:
Engine: 2.0l R4/4V TFSI

[cawadany]

Interested, too, to this thing. I had made a file for my (Golf V GTI 2.0 TFSI) with time, but I never got to try it since I have it on the emulator. So apparently this sw does not work, at least with regard to this function....

[James]

the magi, but will turn on after 3 days and not immediately, but have you tried to remove it physically immediately after the mod?

[magi1984]

I don't know the file ? was made for another workshop, I the car I have not seen

[cawadany]

? "normal" that does not turn on immediately the light. And if the probe ? excluded via the map does not ? need to unplug it.

[alfajtd]

but ? deleted the lambda physically ?

you have disconnected the electrical connection?

[motorsport]

I think with ******* you can delete without problems!!!

[magi1984]

but ? deleted the lambda physically ?

you have disconnected the electrical connection?

no, it detached the connection?

[cawadany]

no, it detached the connection?

For what I know no, it should not be detached.

[alfajtd]

but it must not be detached...
those cars must have the probes to work very well!!!
if no, enter the strategy of recovery...

[jolidj]

I think that time work. tap to try.

[magi1984]

[gorimotors]

I can't download the attachment, otherwise you I see...

[magi1984]

you could attach a gold and a mod for example? I would be infinitely grateful

[gorimotors]

you could attach a gold and a mod for example? I would be infinitely grateful

Here It Is.. Already? tested on various TT

[magi1984]

very nice, thanks 1000

[cawadany]

I was trying to figure out how to act.... :) The Magi, can you post a screen of the mod to your file?

[magi1984]

I don't understand where is the difficulty?
open ori and mod files gorumotors with ecm titanium, and in 2d, you'll see the change that disables the lambda

[cawadany]

Gi? done the comparison in 2d, but I have a few "doubt". In fact, I have not asked for a file, but a simple screen. But it seems I asked too much. Thanks all the same.

[magi1984]

but not ? the question to ask too much of the screen ? here I enclose it to you
the point of it ? if you have doubts of how ? made the mod by analyzing the file in 2d, looking at the screen, you will definitely clarify

[cawadany]

The question was born from the fact that on your gold (and on my ori), I only found the second control, and not the first that would be the one to bring it to zero. For what I asked for one screen of YOUR file.

[cawadany]

I don't know if I have explained....

2609

[magi1984]

to me it is another question...the solution posted by gorimotors ? the same solution of the time...the thing leaves me a p? puzzled

[cawadany]

to me it is another question...the solution posted by gorimotors ? the same solution of the time...the thing leaves me a p? puzzled

Fermi. The drive from diagnosis what he said?

[magi1984]

probe error of lambda and malfunction indicator light turned on.
with the file of the time the malfunction indicator light will be off, and the error of lambda is still in memory
with a file made by another friend, no light and no error, but after 3 days light on and error lambda :)

then, unfortunately, as always happens, I make the file but are not in the workshop by the customer to test the car, then it's not? never what? the specific situation

[cawadany]

Mmmmm, the error must be the P0420, which indicates the inefficiency of the kat. Also from my experience I have seen that some times stores the error in the engine control unit, but do not turn on the light.
Other times, instead, turn on the light.

[gorimotors]

If the error ? inherent in the SECOND lambda probe , so that in the valley, and the inefficiency of the kat, with that change resolves.
Does not solve, however, if the error ? inherent to the FIRST lambda probe, and which must always function as an integral part of the injection strategy. In fact, the ecu corrects the fuel mixture in the function there? that is read from the first probe.

[magi1984]

you I have not upgraded to the discussion, but the problem ? fixed, had been made casino from someone on the wires of the probes, both probes had the wires tagliat and are arranged in a cabbage! However sistemat the wires I have left the mod file and that's it, everything is ok

[cawadany]

So does the fact file with time?

[gorimotors]

I did it with the damos, but if you say that time will do the job, I'm at the point...

[magi1984]

you can confirm that once the file from me posted does the same job of gori in his sample file

[cawadany]

Ok, thanks a lot. Good to know!