read ford fiesta 1.4 68cv with cock

[igor]

thank you in advance

[FidodidoTuning]

let siemens is that the blocks
change hw

[msport (exil77grande)]

I would also say that I do not do it with the old cock take a magpro or a rooster v2 and go quiet also because with the pin to ground in the past someone has burned the ecu.

[igor]

thanks a lot, could you tell me how can I download it without the bdm? I have only galletto 1260 and mpps v12
are always pi? convinced to invest in these blessed 400 and broken

do at least I can make my beloved scania truks

[carlo abarth]

go with the magpro I made a 10ina and go well !!!

[igor]

but if the old cock block because they themselves are the ones to tell you to do so, and you put so much of schema

[nuovaecu]

I confirm that I do not do it with the old cock I burned bad I had to repair from a fellow bad experience

[mafani]

I would also say that I do not do it with the old cock take a magpro or a rooster v2 and go quiet also because with the pin to ground in the past someone has burned the ecu.

listen msport in the past, I was at the beginning too, I have made one with the old cock and luckily went' all is well

[jolidj]

nn if you have the mag then remove and read only the flash , edit ,write and balances , nn risk nothing.

[magi1984]

I've made it with the cock 2 without problems

[msport (exil77grande)]

listen msport in the past, I was at the beginning too, I have made one with the old cock and luckily went' all is well

you will, I believe, but I have given personal advice on reporting my experience so to him I leave the final decision on the most popular things to do.

[mafani]

rightly ? he has to decide whether to dare or not ,you gave him a tip if he accepts ? well

[igor]

and I would say that I accept the council, I don't want to lose out of my own pocket the money for a new ecu
then I am of the opinion that if one does not mean it should not take the risk
better to be on the safe side

oh, I forgot, thanks a lot to all

[ecuboost]

with rooster v2 you can? read by obd safely?

[ecuboost]

with rooster v2 you can? read by obd safely?
I wanted to say, read and write, of course

[leandro89]

with the cock 2 have you had to put the pin 28 to mass?

[giarras]

I confirm all the advice that you have given previously let loose of the old gallaccio, go to magpro that performs very well.

[ecuboost]

I wanted to say, read and write, of course
no one who can confirm or deny?

[eismann]

I with the old rooster, not even me there I should talk about! ;)

[maku1977]

I with the old rooster, not even me there I should talk about! ;)
I... let it be cock-old, or dissaldi or you get a hw most recent

[giary74]

sorry, but in the end ? you can read and write via OBD with the cock 2 clone this ecu???

[sighline]

my curiosity.. the laws, why do you need the gold, or try to add a little naughtiness to the motor by 68cv ?:) or do you have a little experience?

[giary74]

? the machine of a friend of mine who has asked me to try to give her a bit of grit into the pi?.
If you can read and write via obd with gallo2 clone, we are already? good point.

[leandro89]

I have read and written a fiesta 1.4 68cv with galletto 2 v48 with success

[sa80libero]

you cock old to 99% of the blocks....
I don't rieschierei

[ecuboost]

I have read and written more? a ford fiesta with cock v48 clone...everything's good

[giary74]

I hope not to have problems.
My cock 2 v52 clone, after having operated as suggested by a user is very experienced in another thread, for now, is not giving signs of imbalance. So if you can read, in theory, should also know how to write...

[giarras]

go quiet that goes very well on those ecu tested enough.

[infinityecu]

go quiet that goes very well on those ecu tested enough.

I did 2 ford fiesta with gallo v2 safely read from and written to the bomb :-)

[infinityecu]

Guys but no one has had problems with the infamous rolling code?
I up to now never

[infinityecu]

I didn't either, but many say that c'? risk blocking

Even I once on a ford fiesta 1.4 tdci 68 cv of a friend who mounts the same unit but different hw and sw and the previous model as a series of car I loaded the map however in the delay of the error I waited for him to finish writing, and once completed I riscitto the file again to the right and ? game without problems

[infinityecu]

very interesting, I had to do before with sid804 and then with sid802 but without ever having any problem, I always used the cockerel with success? I would like to learn more? of this thing, just to understand the possible risks and the possible solutions in case of problems

Well obviously you always hope that you would get to the problems, but never say never actually even I know before that happens a thing as a work around I would be nettamnete agree