peugeot 307 FAP-OFF

[ecuboost]

would someone be so kind to tell me if the file ? state defappato right?
the car shows no error, whereas before you and it was impossible to delete them.
now not even permit us to do a forced regeneration.

[ecuboost]

I forgot the file:
it is a 307 1.6 hdi 110 hp edc16c34

[ecuboost]

but you can not change pi? messages?
anyway, the file I did it with ecusafe, even if they say that the private car is good, if I confirmed that with ecusafe do it well, do it directly with the

[magi1984]

the file is not ? correct, the bit for the fap off ? been touched, don't you see more? the dtc why? have been erased from the map

[ecuboost]

so it is a bit only?
but then all those things that time has cleared, what are they?only messes?

[magi1984]

are dtc, torque limiters, postiniezioni etc
maybe the file works the same why? ? done via emulation, I don't know.
I and my ecu I through bit switch

[ecuboost]

ok, go and find I'm switch of...

[magi1984]

if it was widely discussed here: https://www.professionalchiptuning.net/showthread.php?1090-Fap-407-hdi&highlight=switch
especially on page 2

[ecuboost]

yes, I read it, but honestly, in the area that say reset, in the map of the post, I see all zero, except for 2-bit

[magi1984]

downloaded the original file in that discussion, you have the addresses, look at the bit and edit it in your original map.
pi? of cos? not s? do

[ecuboost]

With the ecm in those addresses I see everything to 0 except 2-bit, you see, otherwise, always on the map of the 407

[magi1984]

I see what you see

[ecuboost]

Perfect thank you, thank you, thank you to? the tests and if you are interested I will have you know, xke in that post nn ? arrived to a conclusion.

[magi1984]

I am sure that it will work, however if you do know is interested in the whole forum, not just me

[ecuboost]

does anyone have any advice for finding that bit, I can never find the bits

[pabloescobar]

Ecu safe is that machine

[ecuboost]

No, but with the switch

[ecuboost]

Xo if it works well the same... Ecusafe is

[ecuboost]

can someone tell me the confirmation that the swich of the fap goes from 1c68d8 to 1c68dd

[ecuboost]

I tried it on the machine, I confirm I used ecuaafe pi? manual editing

[ecuboost]

? a problem the machine does not walk, but if you leave you lose all of the changes ecusafe, and I mod only the switch works?

[msport (exil77grande)]

We do know, but I think of you.

[ecuboost]

Continues to give the same problem, but it can? the encryption injectors? In practice, it stops at 3000 rpm, qst I have to encode in diagnosis or ? one of those that you encode the walking?

[magi1984]

sorry with that programmer have you written?
if you have used mpps yes, you have to ricodificar the inietori

[ecuboost]

I've done it with mpps, encode it with diagnosed or automatic walking as the other machines?

[magi1984]

with a diagnosis

[virus1976]

if you have lost the encoding you will need to have PP2000/LEXIA I don't know if with a diagnosis generic them, you can re-encode. If you have complied with the 3 minutes of waiting, that tells you the mpps you should not have lost the encoding.

[ecuboost]

But I also put back the original appearance 3 minutes, but nn is

[virus1976]

you need a suitable diagnosis to see if you have lost the encoding proceeds in peugeot, and you make them recode

[ecuboost]

I have the texa axone direct, I see the error coding injectors and telecodifica

[virus1976]

I know that you have to go in the peugeot, try asking in the forum if someone ? of your parts and the lexia wants us to be pi? to say that it

[ecuboost]

I encoded with the texa, for? now often gets telecodifica in memory, not to? if qst problem was there already? from the first, why? if I turn off and power back up is fine.

[msport (exil77grande)]

I have the texa axone direct, I see the error coding injectors and telecodifica

we also have the lexia in the workshop.

[ecuboost]

I encoded with texa, from what ? given the error file encoding intermittent, without any reason, does the fault then I switch off I switch on, and the nn is pi?

[ecuboost]

I encoded with texa, from what ? given the error file encoding intermittent, without any reason, does the fault then I switch off I switch on, and the nn is pi?
I coded the injectors, the error coding injectors do not check more?, for? now I check the error telecodifica, from what ? given? what? the code of the injector, the injector there are printed so many codes.

[ecuboost]

hi here we go again with the same car, in practice, the error telecodifica was given from the injector to the inside of the fap that since? I disabled and re-enabled it had to be coded, now I have tried more? files, as to the fact of the injectors, and I had resolved, but to encode the injector of the fap not ? so easy, someone can tell me what'? the right file?
from what I remember with the processed file with time continued to give the error in the on-board computer, with a file(can't remember which) did not give more? any kind of error even if staccavo the maf for example.
also, c'? any way to remove the error from the on-board computer from the map? why? I have a diagnosis axone direct, they all say that they can change the set up with this, but I have not found it absolutely.

[Antik_]

Hello! Me given the cinciput also interested, I am a beginner and I can't totally get on the said branch, which for this purpose ? need?

[Antik_]

I forgot the file:
it is a 307 1.6 hdi 110 hp edc16c34

That ? need to download this file?

[giarras]

Antik_ you're invited to make your presentation in the appropriate section and then you are invited to read our rules.