PDA

View The Full Version : Repair Magpro


demolitionMan
19-01-2013, 13:27
Guys do you know what components you have to break the magpro?

? the second magpro clone me a break! practically does not communicate the most? with the ecu! not able to take the data and even reading! both can line that k..


Do you have any solution?
thanks to all of you..
giarras
19-01-2013, 13:45
strange never heard of that have had problems, but everything can happen.
demolitionMan
19-01-2013, 14:49
strange never heard of that have had problems, but everything can happen.

I hope someone has had the same problem..
frantik3
19-01-2013, 14:52
you burned two changes to the seller!!!!!!!!!!!
bart
19-01-2013, 14:58
Which versions have you: blue or black?
Bought in Italy or abroad?
Can you post a photo of the two "dead" in order to understand what models are these?
sno74
19-01-2013, 15:12
I'm curious myself to know which version you have burned I have the black one and now all is well then with that the machines are gone, maybe that's the problem ? the machine that you have read the test a little to deepen, perhaps, someone you can? help where ? the problem....
demolitionMan
19-01-2013, 15:32
I'm curious myself to know which version you have burned I have the black one and now all is well then with that the machines are gone, maybe that's the problem ? the machine that you have read the test a little to deepen, perhaps, someone you can? help where ? the problem....

the blue version! now I'll post the photos :D
giarras
19-01-2013, 15:38
both black and blue are pretty reliable, you're the one unfortunate,but so what ? burned?
demolitionMan
19-01-2013, 15:44
Here's to you ...
demolitionMan
19-01-2013, 15:45
both black and blue are pretty reliable, you're the one unfortunate,but so what ? burned?


If I knew I was not asking for help!.. it was fine..now it does not communicate the most? with no ecu!
sno74
19-01-2013, 15:58
sorry so if I understand well, you recognize the interface, but do not connect to the ecu.... Maybe on-line k have put a protection diode can't follow the link of the k-line on the mag and see if we have a diode that protects the......
demolitionMan
19-01-2013, 16:11
practically recognizes only the interface and detects the 12volts.. for the rest it does not communicate...both in k and in the can! died completely.
mattycar
19-01-2013, 17:09
try to install it in another laptop,to see that there are no issues with your usb.
demolitionMan
19-01-2013, 17:21
try to install it in another laptop,to see that there are no issues with your usb.

gi? tried.. same old thing..
sno74
19-01-2013, 17:53
I don't think it's a problem of the usb if it recognizes the interface and gives you the voltage, I am afraid that the problem is in the interface..
demolitionMan
19-01-2013, 17:56
I don't think it's a problem of the usb if it recognizes the interface and gives you the voltage, I am afraid that the problem is in the interface..

I fully agree
davidehfnos
20-01-2013, 22:50
have you tried to install other software???for example, flasc tek????I install a previous version from 4.2 then the collegni so you update the firewall
carlo abarth
20-01-2013, 23:01
you have opened l obd have you seen if the interface has the pin ok????on the ford fiesta I entered was the cable or broken!!!
rego88
21-01-2013, 00:30
you have opened l obd have you seen if the interface has the pin ok????on the ford fiesta I entered was the cable or broken!!!

I also knew that I broke the cable.... but I don't think that in his case.... not communicating ne k ne in the can.... may be punched in both interfaces, the 3 cables inherent in the can, and k???
motorsport
21-01-2013, 00:53
I believe that you and sprogrammato the interface already? happened to some friend!!
demolitionMan
21-01-2013, 12:41
Guys taking ? ok! on the wire c'? continuity?! ? the interface for sure! to know what....
sno74
23-01-2013, 23:31
but with that car you've planted the mag-pro......
demolitionMan
25-01-2013, 13:21
but with that car you've planted the mag-pro......

iaw 59M I was working on a ducati
nuovaecu
25-01-2013, 13:24
according to me it can also be a power problem or other, it seems to me very strange that you are defunti2 right now or heard of the opinions of those who possess it and not year never had these problems
maxsek
25-01-2013, 22:54
surely you will be? sprogrammato....
sno74
25-01-2013, 23:46
Then I don't know what to say I am with the bike I never had to do, I know that with the car not strina why? do not buy a piasini it seems to me that for the bike ? better.....
carlo abarth
26-01-2013, 00:15
why not read the ept and see if it and all ok!!!
maxsek
26-01-2013, 18:46
if you are primarily a motorcycle, you should the piasini as said snow
demolitionMan
26-01-2013, 18:58
why not read the ept and see if it and all ok!!!

as I read it?
demolitionMan
27-01-2013, 22:00
here is the solution to repair the magpro

replace these components and back again for your programmer.

WE TRY TO HELP MORE?.

let's fill the post only messages . but there are a few info for practical and useful..:(


2538
bart
28-01-2013, 20:50
here is the solution to repair the magpro
replace these components and back again for your programmer.
WE TRY TO HELP MORE?.
let's fill the post only messages . but there are a few info for practical and useful..:(
2538

Thanks demolitionman for sharing! :)
Where did you find these components?
demolitionMan
28-01-2013, 21:15
found in an electronics store!..
sno74
28-01-2013, 22:18
ok you have repaired but perhaps understand what causes the breakdown of these components....
demolitionMan
29-01-2013, 09:16
ok you have repaired but perhaps understand what causes the breakdown of these components....

I think the 59f-59m who went to a coil..but I'm not sure
sno74
29-01-2013, 09:44
so you had 59f-59m to repair or replace....
abbate
29-01-2013, 17:02
Hi to all.I have a Mag chinese clone-black,updating it to vers.4.2 ? locked, me ? pop-up the wording of the ERROR UPGRADE 100,it does not communicate with any ecu.When I connect to the car window, with written MAG NOT FOUND PANEL.CONNECTIONS AND POWER.
It is possible to restore? Thanks.
sno74
29-01-2013, 18:49
Hi to all.I have a Mag chinese clone-black,updating it to vers.4.2 ? locked, me ? pop-up the wording of the ERROR UPGRADE 100,it does not communicate with any ecu.When I connect to the car window, with written MAG NOT FOUND PANEL.CONNECTIONS AND POWER.
It is possible to restore? Thanks.
you know that when you are chinese are not to be updated why? then they are to be planted let's see if someone there has already? tinkered inside but maybe you should buy another make before........
demolitionMan
15-03-2013, 10:34
you know that when you are chinese are not to be updated why? then they are to be planted let's see if someone there has already? tinkered inside but maybe you should buy another make before........

maybe ? the control of the usb! change the quartz .. maybe solve..
powercore
17-03-2013, 22:45
Components magpro2



3269