View The Full Version : problem error start on mercedes vito 2001
Good evening to all, a colleague brought me a ecu and Vito edc15 why? want to make the scodifica total since the start-up is not part of(no turns, not even the starter motor) and the display start error, apart from that I'm not sure that the scod. the total you can do but then it seems to me that this problem is caused by the ecu immo, anyone ? gi? 've a problem like this?Thanks
magi1984
17-01-2013, 23:19
I ? happened on a class, need the emulator, and the file of virgin
if I am not mistaken, I should have still ujn emulator in the company just for the vito. tomorrow, if you need let me know, I'm not doing anything and I want to sell it
ok thanks I keep an account if the problem ? that, and looking around I saw that there are software programs that process the file of cent. the immo in order to eliminate this drawback.
legendaryslave
17-01-2013, 23:25
if you want to do a test, I have a sotf for mercedes if allegi the comentunuto of the 24c02 do a cosetta
ok, but the memory of the ecu or in the immo?
legendaryslave
17-01-2013, 23:32
memria ecu
ok I did see that one already? in the workshop, then tomorrow I bring the ecu immo cos? I also see that.
you have to post the eeprom of ecu and processor immo box.
Then on the ecu already? put the hands and the eeprom has a broken leg just resting and I can't even read it so I need another file.
this and the eeprom ecu engine, tomorrow brings me to the immo and I also read that.
legendaryslave
18-01-2013, 12:26
ok I was watching you do the immobox you have to see if mounts hc05 or hc08 and you have to do a reading then that memory ? the one that you have posted the engine control unit ? 5 or 2 plug
Meanwhile, thanks for the responses, the immo mounts a hc08 and tomorrow I read it, the ecu ? 5 plug.
legendaryslave
18-01-2013, 18:14
ok let me read the hc08 http : / /
here is the reading of the micro just made, I was able to make me take tonight cos? gain a p? of time.
legendaryslave
18-01-2013, 18:53
try so very probably part of the flight to the brink by a realigned with the diagnosis
do you know how ? gone
anyway, you could solve easily with the original diagnosis.. you have to Rinserire the frame in the ecu and not c?ra to do anything... ( if you have the official tool )
Ok, thanks a Monday? I plan everything and I know, of course, the official diagnosis is not I, but ? also likely that if this inconvenience ? happened once could happen again, this solution legendaryslave ? to be considered definitive?Thanks again.
legendaryslave
19-01-2013, 17:20
Ok, thanks a Monday? I plan everything and I know, of course, the official diagnosis is not I, but ? also likely that if this inconvenience ? happened once could happen again, this solution legendaryslave ? to be considered definitive?Thanks again.
? a solution only for your vehicle but you should go to the 99 percent, let us know
motorsport
19-01-2013, 19:30
I hate to say this,and a feasible solution already? made with a positive outcome!!
Hi, yesterday I programmed the eeprom and the micro, the mechanic tells me that I have always the same error, you need to do some alignment in the diagnosis?the micro mask had 0j66d then 08.
legendaryslave
22-01-2013, 12:56
which error do you have ? p..... in diagnosis engine or the ignition?
The mechanic tell me why? not I have the means, just do the after diagnosis I tell you something.
legendaryslave
22-01-2013, 13:02
I would not like that we did a job for another
Errors are active in the ecu, engine: terminal 50 is not allowed, goodwill is not allowed, error engine control unit, active, error immo deleted and then not ? pi? re-presented, century in diagnosis in the immo, you can not enter.
Hello legendaryslave. you have any other idea for the vito, it brought me to the middle, now I try to program and immo eeprom ecu with the other files made with other software that I have, then vediamo.Se can you think of something let me know.
After various tests with different files micro and immo eeprom ecu I am always the same errors, even going back to the original files:start-up is not allowed, sync immo, immobilizer ok, code immo ok, antiavviamento unlocked, injection locked, the signal can antiavviamento not ok.If I turn off the picture do I remove the rel? and then I turn it on it immediately goes in motion 2 seconds and then turns off.
legendaryslave
23-01-2013, 21:58
the relay for main ?
the rel? they are ok, however I can not enter the diagnosis in the immo, I need the schema immo and ecu to connect to the tour and see if you can get to, to exclude problems of noise on the lines of comunicazioine or wiring.Here the immo communicates on the k-line or can?
Thanks sno74, tomorrow I see if I can't connect to tour with the immo, I would not like it was a failure.
..sorry, but have you tried the second key???
You ? was the first thing.
Ok..I browsed quickly the discussion but I didn't read about that anywhere..ps maybe me ? escaped too.. Avetebdiagnosi official star diagnosis? .. If there is a test wizard to test all of the systems immobilized king,the key and the engine control unit.
Today I checked the can lines ecu and immo and they are ok, power immo ok, diagnosis immo can't I log in, I'm at the point I wanted to try it with an emulator and scodifica ecu, the problem appears to be the immo, he sets in motion 2 seconds and then turns off.
legendaryslave
24-01-2013, 12:55
not ? that you have some problem on the processor in risaldarlo not ? glued to a certain pin
I don't think, I'll check them always a one-to-one then I couldn't enter the diagnosis even before removing it.
legendaryslave
24-01-2013, 21:58
and I know that your problem is that you own them then
Tomorrow I get the emulator immo and I try, however its the ecu immo bench does not send any signal on the can line so I think it's just gone.
Mounted in the emulator, and programmed the eeprom, the middle ? the party at the first blow all resolved.
legendaryslave
26-01-2013, 18:27
I'm glad that you have solved can I ask you which emulator you put it ?
motorsport
26-01-2013, 19:45
also I'm interested in, if possible, where you bought it also in pm. thanks
frantik3
26-01-2013, 20:06
very good, however, strange that reprogramming the ep2 and resetting the start error is not a game I made so many all games
in fact, 100% of the part with e2p + micro. you and the wrong qualcosa.cmq the emulator and the solution + - friendly and faster.
With e2p and micro I tried 2 different solutions but did not ? never party, the problem ? that is also the first to put his hand on the immo is not entered in the diagnosis (in the immo), usually in these cases you can enter the diagnosis in the immo with the problem start error?
sorry, but you are informed of the cost of the ecu immo?
No, the customer wanted to spend the least possible, and certainly I did spend less with the emulator, immo not interested in anything, the ecu is immo ? just went you should figure out the why? also not to put a new one and be in the same siruazione.
anyway, you could solve easily with the original diagnosis.. you have to Rinserire the frame in the ecu and not c?ra to do anything... ( if you have the official tool )
Hello I have a problem with ezs w203, have been inhibited all the memories of the keys, with the diagnosis mercedes you can do something?
Or you need the keys to the workshop? thanks
very good, however, strange that reprogramming the ep2 and resetting the start error is not a game I made so many all games
quoto I also tried the solution eeprom + micro immo and nothing ... I have installed the emulator and everything went ok!!!
cabbage to me and went to the first......made only from eeprom.......extract content with willem 32-bit checksum!.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.